The effects of alginate microspheres on phytoremediation and growth of Lemna minor in the presence of Cd

Today, the removal of increased amount of contaminant concentrations in nature such as metals, nanoparticles, has become an essential issue to struggle with. In this paper, both the toxic effects of non-essential Cd on Lemna minor in presence of alginate microspheres and metal removal capacity of Cd-exposed L. minor and microspheres were investigated. Three test groups were constructed: group (L) containing Lemna, group (M) containing alginate microsphere and group (L?+?M) containing alginate microsphere and Lemna. Five different levels of Cd concentrations were added into these groups. Estimation models were constructed to estimate Cd removal capacities of L. minor and microspheres, and time-concentration-dependent growth (GRC) rates of both microsphere-containing and non-containing groups were modelled by regression analysis. It was seen that microspheres alone only had no positive or negative effects on Lemna growth. It was observed that, for all test groups the time-dependent growth rate has both increase–decrease trends in general. The toxicity effect of Cd on Lemna growth was reduced by adding microspheres into medium. Furthermore, the results stated that test groups containing only microspheres (M, 0–97.56%) and consortium groups (M?+?L, 0–98.26%) were slightly more successful in Cd removal process compared to Lemna (L) groups (L, 0–97.32%).     

Measurement of Traffic Related Toxic Air Pollutants in an Urban Atmosphere

Nose-level measurements of air toxics were made along a busy urban street in Ottawa, Canada for 2 hr periods during morning, noon, and afternoon rush hours in the winter and summer of 2000. Measurements were also made in a commuter car and a transit bus during morning and afternoon commutes in 2000. The main objectives of the study were to establish a database, to determine temporal and seasonal variations and to determine the contribution of motor vehicle traffic to the measured toxic substance concentrations. Ottawa is an appropriate choice of location for the measurement of motor vehicle related toxic and reactive compounds, as it has virtually no industrial sources that could be contributing to the ambient loadings. Samples were collected for a total of 165 volatile organic compounds and 25 carbonyl compounds. Sampling and analytical methodologyare discussed and results are presented. Toluene, ethylene andformaldehyde were the most abundant pollutants in Ottawa during both winter and summer. Total non-methane hydrocarbon concentrationwas measured as 100 g m^-3 at nose-level measurements in Ottawa.     

Effect of alkalinity on the performance of a simulated landfill bioreactor digesting organic solid wastes

This study investigated the effects of alkalinity on the anaerobic treatment of the organic solid wastes collected from the kitchen of Engineering Faculty in Dokuz Eylul University, Izmir, Turkey and the leachate characteristics treated in three simulated landfill anaerobic bioreactors. All of the reactors were operated with leachate recirculation. One reactor was operated without alkalinity addition. The second reactor was operated by the addition of 3 g l-1 d-1 of NaHCO3 alkalinity to the leachate and the third reactor was operated by the addition of 6 g l-1 d-1 NaHCO3 alkalinity to the leachate. After 65 d of anaerobic incubation, it was observed that the chemical oxygen demand (COD), volatile fatty acids (VFA) concentrations, and biochemical oxygen demand to chemical oxygen demand (BOD5/COD) ratios in the leachate samples produced from the alkalinity added reactors were lower than the control reactor while the pH values were higher than the control reactor. The COD values were measured as 18900, 3800 and 2900 mg l-1 while the VFA concentrations were 6900, 1400 and 1290 mg l-1, respectively, in the leachate samples of the control, and reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 after 65 d of anaerobic incubation. The total nitrogen (TN), total phosphorus (TP) and ammonium nitrogen (NH4-N) concentrations in organic solid waste (OSW) significantly reduced in the reactor containing 6 g l-1 NaHCO3 by d 65. The values of pH were 6.54, 7.19 and 7.31, after 65 d of anaerobic incubation, respectively, in the aforementioned reactors results in neutral environmental conditions in alkalinity added reactors. Methane percentage of the control, reactors containing 3 g l-1 NaHCO3 and 6 g l-1 NaHCO3 were 37%, 64% and 65%, respectively, after 65 d of incubation. BOD5/COD ratios of 0.27 and 0.25 were achieved in the 3 and 6 g l-1 NaHCO3 containing reactors, indicating a better OSW stabilization. Alkalinity addition reduced the waste quantity, the organic content of the solid waste and the biodegradation time.     

收口工艺反向模拟技术研究

综述了国内外反向模拟技术 ,介绍了收口工艺特点 ,建立了收口反向模拟技术的理论和系统流程 ,并针对收口工艺提出了反向模拟边界条件确定方法。     

我国废旧家电管理制度体系初探

在对我国废旧家电的属性进行分析的基础上，研究了我国废旧家电管理涉及的对象及主要任务，强调了我国建设废旧家电管理制度体系的必要性，并提出了一系列管理制度的建议。     

Concentrations of heavy metal and radioactivity in surface water and sediment of Hazar Lake (Elaziğ, Turkey)

Concentration of heavy metals and natural gross radioactivity were measured in the surface water and sediment of Hazar Lake (Elazi?, Turkey). Eight sampling sites were pre-defined in different locations of the lake. A preliminary study on heavy metals (Zn, Fe, Mn, Ni, Cu, Cr, Co and Pb), major elements (Na, K, Ca, Mg) concentrations and natural radioactivity related to 226Ra, gross-alpha and gross-beta radiations in the surface water and deep sediments were determined. The obtained results showed that, in general, the heavy metals (Zn, Fe, Mn, Ni, Cu and Pb) and major elements (Na, K, Ca, Mg) concentrations in water did not exceed WHO (World Health Organization, 1999), EC (Europe Community, 1998), EPA (Environment Protection Agency, 2002) and TSE-266 (Turkish Standard, 1997) guidelines. Generally, heavy metals and major elements concentration of the sediments were found decrease in sequence of Fe>Mg>Ca>Mn>Zn>Ni>Cr>Cu>Co>Pb. The results of this study indicated that a general absence of serious pollution in the Hazar Lake. The results obtained from the radioactivity determination indicate that the surface water radioactivity concentration of 226Ra, gross-alpha and gross-beta were ranging from 0.52+/-0.02 to 2.02+/-0.06 Bq/l and from 0.65+/-0.03 to 2.52+/-0.07 Bq/l and from 0.01+/-0.01 to 0.14+/-0.01 Bq/l, respectively. Deep sediment radioactivity concentrations of 226Ra is ranging from 0.07+/-0.03 to 0.32+/-0.07 Bq/g.     

Heavy metal monitoring of marine algae from the Turkish Coast of the Black Sea, 1998-2000

Concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn were determined in macroalgae samples collected from the Turkish Coast of the Black Sea. Certain algae species were chosen among the green, brown and red algae species at Sile and Sinop sampling stations from 1998 to 2000. In general, as regards the influence of the collection sites on the whole metal accumulation, Sinop is considered to be more polluted than Sile. The concentrations of the heavy metals in Cystoseira barbata algae are compared with previous studies in the same stations. The results showed that all metal levels have gradually decreased during past years. At the same time, Cd, Co, Cr, Cu, Fe, Ni and Pb levels in the present study are lower than in Bosphorus and Marmara Sea algae. However, Mn and Zn concentrations are higher than Bosphorus but lower than at Marmara. According to these findings the heavy metal pollution decreased in Turkish Coast of the Black Sea during the years investigated.     

Adsorption kinetics of methyl violet onto perlite

This study examines adsorption kinetics and activation parameters of methyl violet on perlite. The effect of process parameters like contact time, concentration of dye, temperature and pH on the extent of methyl violet adsorption from solution has been investigated. Results of the kinetic studies show that the adsorption reaction is first order with respect to dye solution concentration with activation energy of 13.2 kJ mol(-1). This low activation energy value indicates that the adsorption reaction is diffusion controlled. The activation parameters using Arrhenius and Eyring equations have been calculated. Adsorption increases with increase of variables such as contact time, initial dye concentration, temperature and pH.