Extracting urban impervious surfaces from Sentinel-2 and Landsat-8 satellite data for urban planning and environmental management

Environmental Science and Pollution Research - Impervious surface is mainly defined as any surface which water cannot infiltrate the soil. Due to the impact of urban impervious surfaces (UIS) on...     

Appraisal of methane production and anaerobic fermentation kinetics of livestock manures using artificial neural networks and sinusoidal growth functions

This study aimed to perform a comparative analysis of the performance of five models (Gompertz, logistic, Richards, the first-order, artificial neural networks) in predicting methane production rate from anaerobic digestion of livestock manures. The input variables were fermentation time, digestion temperature, biogas temperature, ambient temperature, pH, and specific biogas production rate. The physicochemical compositions of cow manure and sheep manure showed that volatile solid (VS) contents were close to each other in manure compositions (77.6% and 64.7%, respectively), while the potential of methane production from cow manure (673.44 mL CH₄/g VS) was greater than that from sheep manure (320.32 mL CH₄/g VS). The determination coefficients (R²) for logistic function, Gompertz, Richards, the first-order, and ANN models were obtained as 0.968, 0.967, 0.975, 0.825, and 0.995 for the cow manure, respectively. In case of the sheep manure, the R² values obtained from these models were 0.976, 0.979, 0.981, 0.968 and 0.991, respectively. Although the determination coefficients of all models were in satisfactory agreement with the experimental data, the ANN model showed competitive lower RMSE values of 0.111 and 0.164 for cow and sheep manure data sets, respectively, indicating its superior performance than other models.

     

Ethical Approach to Fluoridation in Drinking Water Systems of UK and Turkey

The practice of adding substances to make water safe to drink and its consequential effects on human health have been a contentious matter for a long time. In this study, the addition of fluoride in drinking water was evaluated after examining two different countries: Britain and Turkey. This study has used an independent and ethical approach taking into account the cautious but assertive dentists’ comments on the addition of fluoride for years. This research focuses on a comparative analysis of Britain, an advanced economy, and Turkey, a developing country, supported with tangential reference to worldwide practice in general. Drawing on ongoing studies, the research analyses empirical evidence and arguments to conduct an assessment of Turkey’s practices. The ethical argument about fluoridation focuses on the question of adequate evidence for its health benefits and the autonomy of the consumer. As the consumer is not fully consulted about this practice, it could be argued that the will of the consumer can be put to the test in the democratic process. Hence, the key to any policy has to be about both clarity of the national government intention and continued engagement with consumer groups at regional level.     

Guluronic acid content as a factor affecting turbidity removal potential of alginate

Alginates are natural polymers composed of mannuronic and guluronic acid residues. They are currently extracted from brown algae; however, alginate can also be synthesized by some species of Azotobacter and Pseudomonas. Alginates with different proportion of mannuronic and guluronic acids are known to have different characteristics and form gels at different extents in the presence of calcium ions. The aim of this work was to investigate the usefulness of alginate as a non-toxic coagulant used in purification of drinking water. This study utilized alginates from Azotobacter vinelandii having different guluronic acid levels. These were obtained partly by changing the cultivation parameters, partly by epimerizing a purified alginate sample in vitro using the A. vinelandii mannuronan C-5 epimerase AlgE1. The different alginates were then used for coagulation together with calcium. The results showed that turbidity removal capability was dependent on the content of guluronic acid residues. For the best performing samples, the turbidity decreased from 10 NTU to 1 NTU by the use of only 2 mg/L of alginate and 1.5 mM of calcium chloride.

     

一体化净水器处理矿井水工程改造实践

概述了某矿井水处理站的原有工艺和改造的必要性，指出了存在的问题，提出了具体的改造路线，并对水处理成本和经济效益进行了分析。     

黄土高原地区小麦生产潜力模拟研究

分析了作物生产潜力常规研究方法的不足,探讨了作物生长模型模拟方法的优势,在模型验证和气象、土壤和作物数据库组建的基础上,应用DSSAT3中的CERES小麦模型模拟研究了黄土高原地区28个代表点冬小麦和春小麦的光温生产潜力和气候生产潜力,统计计算了各点小麦产量潜力多年平均值、标准差、最高值和最低值,分析了潜力值年际变异与地区分布差异,并计算了小麦的水分满足率。黄土高原冬小麦光温生产潜力、气候生产潜力和水分满足率分别为7970～8647kg/hm²、2219～7545kg/hm²和0.278～0.872,春小麦分别为7436～9127kg/hm²、0～7598kg/hm²和0.192～0.961。     

Color and COD removal from wastewater containing Reactive Black 5 using Fenton's oxidation process

In this study, Reactive Black 5 (RB5) was removed from synthetic wastewater using Fenton's oxidation (FO) process. Experiments were conducted on the samples containing 100 and 200 mg l(-1) of RB5 to remove the dye toxicity. Seventy-five milligram per litre of RB5 caused 25% toxicity on 24-h born daphnids whereas 100 mg l(-1) of RB5 displayed 100% toxicity on Daphnia magna. The study was performed in a systematic approach searching optimum values of FeSO(4) and H(2)O(2) concentrations, pH and temperature. Optimum pH and temperature for 100 mg l(-1) of RB5 were observed as 3.0 and 40 degrees C, respectively, using 100 mg l(-1) of FeSO(4) and 400 mg l(-1) of H(2)O(2) resulted in 71% chemical oxygen demand (COD) and 99% color removal. For 200 mg l(-1) of RB5, 84% COD removal was obtained using 225 mg l(-1) of FeSO(4) and 1000 mg l(-1) of H(2)O(2) yielding 0.05 molar ratio at pH 3.0 and 40 degrees C. Color removal was also more than 99%. The optimum conditions determined in accordance with the literature data. The H(2)O(2) requirement seems to be related to initial COD of the sample. FeSO(4)/H(2)O(2) ratios found were not changed for both concentrations. The temperature affected the COD removal significantly at high degrees. Toxicity was completely removed for each concentration of RB5 at optimum removal conditions.     

Stereoisomeric composition of the sex pheromone of the pine sawfly <Emphasis Type="Italic">Microdiprion pallipes</Emphasis> (Hym., Diprionidae)

Summary. The basic chemical structure of the sex pheromone of the pine sawfly Microdiprion pallipes (Fallén) has earlier been identified as the propionate ester of (2S,3S,7R/S,11R/S)/(2R,3R,7R/S,11R/S)-3,7,11- trimethyl-2-tridecanol. We now report the results from further investigations on the male response to individual stereoisomers and to blends of stereoisomers, both in electroantennographic (EAG) recordings and in field trapping experiments. We also present our attempts to determine the stereochemistry of the compounds present in females of M. pallipes. By comparing gas chromatograms and mass spectra obtained from natural extracts with those from synthetic compounds it was found that the females contain one or more of the four (2S,3S,7R/S,11R/S)-3,7,11-trimethyl-2- tridecanol isomers (SS++-1). The active pheromone component is the corresponding propionate ester 2. In EAG experiments, males responded most strongly to five propionate ester samples, namely two four-isomer blends: SS++-2 and SR++-2, and three individual stereoisomers: SSSR-, SRRR- and SRSR-2. In a series of field trapping experiments it was found that males were attracted to the SR++-2 four-isomer blend and to the individual isomer SSSR-2. Based on the EAG-recordings and field responses of males and the stereoisomers found in the females, we suggest that the propionate ester of (2S,3S,7S,11R)-3,7,11-trimethyl-2- tridecanol (SSSR-2) is used as a main component of the sex pheromone in M. pallipes. Apparently the males react to other stereoisomers in addition to that or those produced by the females.