Biosynthesis and Characterization of Laccase Catalyzed Poly(Catechol)

Enzymatic polymerization of catechol was conducted batch-wise using laccase enzyme produced by the culture Trametes versicolor (ATCC 200801). The polymerization reaction was carried out in 1:1 (v/v) aqueous-acetone solution, buffered at pH 5.0 with sodium acetate (50 mM) in a sealed, temperature-controlled reactor at 25°C. The molecular weight of the produced polymer was determined with GPC. FT-IR, DSC, and TGA were employed to investigate the structure and thermal behavior of synthesized poly(catechol). It was found that catechol units were linked together with ether bonds and thermal stability of the catechol increased in the poly(catechol) polymeric structure effectively. The number average molecular weight of poly(catechol) was found as 813 ± 3 Da with a very narrow polydispersity value of 1.17 showing selective polymerization of catechol by the enzyme.     

Interrelationships among foreign direct investments,renewable energy,and CO2 emissions for different European country groups: a panel ARDL approach

Environmental Science and Pollution Research - This study estimated unbalanced panel data analysis to investigate the relationship among CO2 emissions, GDP, renewable and non-renewable energy...     

The Removal of Acid Violet 90 from Aqueous Solutions Using PANI and PANI/Clinoptilolite Composites: Isotherm and Kinetics

Polyaniline (PANI) and polyaniline/Gördes-clinoptilolite (PANI/GC) composite materials were synthesized by the chemical oxidative polymerization technique and used in the adsorption of Acid Violet 90 metal-complex dye (AV 90). The samples were characterized by X-ray diffractions, nitrogen adsorption–desorption isotherms, scanning electron microscopes and Fourier transform infrared. The effect of initial pH (2–8), sorbent dosage (0.5–4.0 g/L) and initial dye concentrations (50–400 mg/L) on adsorption onto PANI and PANI/GC were examined in a batch system. Langmuir, Freundlich and Temkin isotherm models were used to investigate the adsorption mechanism of AV 90 on PANI and PANI/GC. Langmuir isotherm model for PANI/GC and Freundlich isotherm model for PANI were fitted well with the experimental data. The highest dye uptake capacities were obtained with Langmuir isotherm model as 153.85 mg/g and 72.46 mg/g for PANI and PANI/GC, respectively. In order to determine the adsorption kinetics, pseudo first-order and second-order kinetic models were studied. As a result, the adsorption of AV 90 dye on PANI and PANI/GC was better identified with Pseudo second-order kinetic model than the first one.     

The effects of alginate microspheres on phytoremediation and growth of Lemna minor in the presence of Cd

Today, the removal of increased amount of contaminant concentrations in nature such as metals, nanoparticles, has become an essential issue to struggle with. In this paper, both the toxic effects of non-essential Cd on Lemna minor in presence of alginate microspheres and metal removal capacity of Cd-exposed L. minor and microspheres were investigated. Three test groups were constructed: group (L) containing Lemna, group (M) containing alginate microsphere and group (L?+?M) containing alginate microsphere and Lemna. Five different levels of Cd concentrations were added into these groups. Estimation models were constructed to estimate Cd removal capacities of L. minor and microspheres, and time-concentration-dependent growth (GRC) rates of both microsphere-containing and non-containing groups were modelled by regression analysis. It was seen that microspheres alone only had no positive or negative effects on Lemna growth. It was observed that, for all test groups the time-dependent growth rate has both increase–decrease trends in general. The toxicity effect of Cd on Lemna growth was reduced by adding microspheres into medium. Furthermore, the results stated that test groups containing only microspheres (M, 0–97.56%) and consortium groups (M?+?L, 0–98.26%) were slightly more successful in Cd removal process compared to Lemna (L) groups (L, 0–97.32%).     

Sulphur-oxidising bacteria isolated from deep caves improve the removal of arsenic from contaminated harbour sediments

Acidophilic S-oxidising bacteria isolated from sulphur-rich deep caves (Frasassi, Italy), characterised by relatively low temperature, were tested for their ability to mobilise (semi-)metals from contaminated sediments. Sediment samples from two commercial Italian seaports were used to set up bioleaching experiments. The effect of different growth substrates was also investigated. Our experiments revealed that S-oxidising bacteria isolated from Frasassi caves have a high potential to remove As from contaminated marine sediments, as never reported before. Although As solubilisation efficiency was quite low (i.e. about 30%), only a small amount of As was associated with non-residual fractions of the sediment. On the contrary, the solubilisation efficiencies of Zn and Ni (20% and 10%, respectively) were lower than those previously obtained by the use of other acidophilic bacteria and mainly influenced by the experimental conditions rather than by the presence of the S-oxidising bacteria. Results presented here open new perspectives in bioleaching applications for the remediation of contaminated sediments. Indeed, microbial strains adapted to relatively low-temperature environments could improve sediment bioleaching at temperature regimes where mesophilic and thermophilic strains are not favoured. Such strains could be exploited for developing selective bioremediation procedures for sediments contaminated with As, to be applied in multistep biotreatment processes.     

Smoke filtration performances of membranes produced from commercial PVA and recycled PET by electrospinning method and ANN modeling

Environmental Science and Pollution Research - Plastic waste and air pollution are becoming a great concern due to their adverse effect on human health and the environment. There is increasing...     

载体制备方法对贵金属催化剂Ru/ZrO2催化湿式氧化性能的影响

蒸煮处理水合氢氧化锆制备了ZrO20A;将水合氢氧化锆静置过夜制得ZrO2-B;以此两种载体通过初湿浸渍法制得Ru／ZrO2催化剂．在BET测试中,ZrO2-A载体及其相应催化剂的比表面积远高于ZrO2-B载体及相应催化剂．TPR表明Ru／ZrO2-A中Ru的分散性更好,金属与载体的相互作用更为紧密．以苯酚和乙酸水溶液为模拟废水进行催化剂的评价,结果表明,Ru／ZrO2-A无论是在反应活性还是稳定性上均优于Ru／ZrO2-B．     

Quality of Shallow Groundwater and Drainage Water in Irrigated Agricultural Lands in A Mediterranean Coastal Region of Turkey

Spatial and seasonal differences in water quality of drainage water and unconfined shallow groundwater were related to irrigation in Samandağ, a Mediterranean coastal region. Eighteen wells, seven drainage points and Orontes River were monitored bimonthly for one year for analyses of electrical conductivity (EC), total dissolved solids (TDS), sodium adsorption ratio (SAR), cations (Na, K, Ca + Mg) and anions (CO₃, HCO₃, Cl and SO₄). Agricultural irrigation using saline groundwater decreased water quality of Orontes River during the irrigation season (May to September) more than during the non-irrigation season (October to April). Seasonal fluctuations in water quality of shallow groundwater were greater during the irrigation season than the non-irrigation season in the study area. Excessive use of groundwater resulted in a decline in the water table levels in the irrigation season. Water table level rose up to the soil surface in areas where there was a lack of drainage or poor drainage, due to the impact of precipitation in the winter. SAR and pH values of drainage water increased in the irrigation season, while the other properties of drainage water decreased. Irrigation water quality of Orontes River was classified as C₃S₁ in both seasons. Irrigation water quality of shallow groundwater and drainage water varied from C₂S₁ to C₄S₂ in one year. Drainage and well waters were found to be different on yearly basis in terms of Na, SAR (p<0.01) and Ca + Mg concentrations (p<0.001). Ca + Mg concentrations for both sources were different for all sampling dates (p<0.001).     

Comparison of old and new municipal solid waste management systems in Denizli, Turkey

Rapid economic growth, increasing population and change in living standards contribute to increasing the generation rate of municipal solid waste (MSW) in Denizli city, like other Turkish cities. The improper and poor MSW management system (old system) in Denizli caused environmental problems originating from the uncontrolled release of methane and leachate. In addition, the disposal of recyclable materials in unsanitary landfills is responsible for the consumption and destruction of natural sources. This paper presents a general overview of old and new MSW management practices in Denizli. Detailed data on MSW management practices including collection, transportation, disposal and recycling have been presented. The amount of solid waste generated in Denizli over the last decade has increased steadily over the years, from 108,500 tons in 1995 to 179,495 tons in 2006. The average MSW generation rate was found to be 1.23kg/day per capita. The major constituent of MSW in Denizli is food waste, but the percentage of recyclable waste has increased significantly recently. Except for metal wastes, the percentages of recyclable waste materials in Denizli are higher than in all neighborhood cities. The objective of this study is to compare the old and new MSW management systems in Denizli city. The MSW management system has been changed entirely last five years. A dumpsite was closed and a sanitary landfill with a composting facility was constructed. In addition, source separated collection has been carried out since 2002. The quantity of recyclable waste collected increased from 195 to 1549 tons. The amount of recyclable waste will continue to be increased by expanding the source separation collection system to all the districts of the city and preventing scavenging. Thus, revenue from recyclable waste ($7227 in 2006) is expected to increase. In addition, the capacity of the composting facility will be increased. Most importantly, information to increase public participation and awareness in municipal recovery programs has to be provided.     

微波消解-原子吸收光度法测定堆肥中微量镉、锌和铜

研究并确定了微波消解堆肥的最佳条件,应用原子吸收与数据导数处理系统相结合方法解决了堆肥体系中微量金属Cd.Zn和Cu的测定问题,对应元素的灵敏度可提高一个数量级.检出限均有不同程度的降低,从而极大提高分析的准确度.同时对堆肥实际样品进行加标回收实验,测定了堆肥样品中金属的回收率,其回收率分别在99.5%-102.0%、98.7%-99.1%和98.8%-104.0%之间.实验结果显示,该方法快速、准确、可信.