The role of bacterial consortium and organic amendment in Cu and Fe isotope fractionation in plants on a polluted mine site

Copper and iron isotope fractionation by plant uptake and translocation is a matter of current research. As a way to apply the use of Cu and Fe stable isotopes in the phytoremediation of contaminated sites, the effects of organic amendment and microbial addition in a mine-spoiled soil seeded with Helianthus annuus in pot experiments and field trials were studied. Results show that the addition of a microbial consortium of ten bacterial strains has an influence on Cu and Fe isotope fractionation by the uptake and translocation in pot experiments, with an increase in average of 0.99?‰ for the δ⁶⁵Cu values from soil to roots. In the field trial, the amendment with the addition of bacteria and mycorrhiza as single and double inoculation enriches the leaves in ⁶⁵Cu compared to the soil. As a result of the same trial, the δ⁵⁶Fe values in the leaves are lower than those from the bulk soil, although some differences are seen according to the amendment used. Siderophores, possibly released by the bacterial consortium, can be responsible for this change in the Cu and Fe fractionation. The overall isotopic fractionation trend for Cu and Fe does not vary for pot and field experiments with or without bacteria. However, variations in specific metabolic pathways related to metal–organic complexation and weathering can modify particular isotopic signatures.     

Ecotoxicological effects of sediments from Mar Piccolo,South Italy: toxicity testing with organisms from different trophic levels

The Mar Piccolo of Taranto (Ionian Sea, Southern Italy) is a semi-enclosed and strongly polluted basin. For decades, it has been subjected to different anthropogenic impacts. These stressors caused severe sediments contamination with high concentration of different pollutants (PAHs, PCB, heavy metals). In order to assess the current status of sediments contamination, an ecotoxicological investigation combined with chemical analysis (heavy metals, PAH, and PCB) has been performed. In order to derive ecologically relevant conclusions, a multiorganisms and multiend-points approach has been applied, exposing organisms from different trophic levels to elutriate and whole sediment. The battery of bioassays consists of a microalgal growth inhibition test (Dunaliella tertiolecta), acute and sublethal assays (end-points: mortality, immobilization and swimming speed alteration) on crustaceans larvae and juveniles, and rotifers (Amphibalanus amphitrite, Artemia salina, Corophium insidiosum and Brachionus plicatilis), and embryotoxicity test on echinoderms (Paracentrotus lividus). Considering the high levels of sediment contamination highlighted from chemical analysis, an unexpected very low toxic effect was observed, even considering the sublethal end-point (larval swimming speed alteration). The results of this study suggest a very complex contaminants dynamic in the Mar Piccolo sediments that, despite a strong level of contamination, seems to not affect in a proportional manner the biological compartment.     

A system dynamics perspective on a viable systems approach definition for sustainable value

Aim of this work is to shed light on sustainable value and develop a model, based on vSa and translated at applicative level through the system dynamics methodology for measuring sustainable value. By adopting vSa perspective, value, characterized by strongly subjective contents, will be considered as a vector quantity, as the result of the subjective weighting of the different dimensions that may change according to the considered organization. Starting from the analysis of system dynamics and vSa, we will implement the theoretical framework into a model developed with system dynamics, hence through a methodology capable of addressing systemic problems which is also an expressive approach to solve issues arising in complex systems (characterized by interdependence, mutual interaction, information feedback, circular causality). In order to translate theory into “action and application” we will develop a model through which it will be possible to exploit the advantages of vSa implemented into an SD model, which ultimately can also be instantiated to specific cases and then simulated for further quantitative insights. Currently, there is no theoretical/practical approach to sustainable value measurement for business organizations that simultaneously considers the dimensions of the triple bottom line together with the subjective perspective of decision-makers. From these considerations, we derived the idea to integrate vSa and system dynamics with the aim of analyzing the issue of sustainable value, whose triple dimension is usually (erroneously) seen under a perspective that does not consider the interactions among those three dimensions. The integration of the subjective perspective within a model for calculating sustainable value can be seen as considering vSa as the theoretical framework, and system dynamics as the methodology that allows translating such an approach into a model that can later be simulated. It is also worth mentioning that through the application of the vSa theory to the case of sustainable value, by means of a transcoding approach like the system dynamics one, we are somehow trying to “redefine”, or better “enhance”, the vSa theory itself, by “operationalizing” it.     

Simulating the production and dispersion of environmental pollutants in aerosol phase in an urban area of great historical and cultural value

Mathematical models were developed to simulate the production and dispersion of aerosol phase atmospheric pollutants which are the main cause of the deterioration of monuments of great historical and cultural value. This work focuses on Particulate Matter (PM) considered the primary cause of monument darkening. Road traffic is the greatest contributor to PM in urban areas. Specific emission and dispersion models were used to study typical urban configurations. The area selected for this study was the city of Florence, a suitable test bench considering the magnitude of architectural heritage together with the remarkable effect of the PM pollution from road traffic. The COPERT model, to calculate emissions, and the street canyon model coupled with the CALINE model, to simulate pollutant dispersion, were used. The PM concentrations estimated by the models were compared to actual PM concentration measurements, as well as related to the trend of some meteorological variables. The results obtained may be defined as very encouraging even the models correlated poorly: the estimated concentration trends as daily averages moderately reproduce the same trends of the measured values.     

Towards a sampling strategy for the assessment of forest condition at European level: combining country estimates

A correct characterization of the status and trend of forest condition is essential to support reporting processes at national and international level. An international forest condition monitoring has been implemented in Europe since 1987 under the auspices of the International Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests). The monitoring is based on harmonized methodologies, with individual countries being responsible for its implementation. Due to inconsistencies and problems in sampling design, however, the ICP Forests network is not able to produce reliable quantitative estimates of forest condition at European and sometimes at country level. This paper proposes (1) a set of requirements for status and change assessment and (2) a harmonized sampling strategy able to provide unbiased and consistent estimators of forest condition parameters and of their changes at both country and European level. Under the assumption that a common definition of forest holds among European countries, monitoring objectives, parameters of concern and accuracy indexes are stated. On the basis of fixed-area plot sampling performed independently in each country, an unbiased and consistent estimator of forest defoliation indexes is obtained at both country and European level, together with conservative estimators of their sampling variance and power in the detection of changes. The strategy adopts a probabilistic sampling scheme based on fixed-area plots selected by means of systematic or stratified schemes. Operative guidelines for its application are provided.     

A field screening test for the assessment of concentrations and mobility of potentially toxic elements in soils: a case study on urban soils from Rome and Novi Sad

The increasing demand for environmental pollution control results in the development and use of new procedures for the determination of dangerous chemicals. Simple screening methods, which can be used directly in the field for a preliminary assessment of soil contamination, seem to be extremely advantageous. In our laboratory, we developed and optimized a rapid test for a preliminary evaluation of both the concentration and the mobility of some potentially toxic metals in soils. This screening test consists of a single extraction of the soil sample with a buffer solution, followed by the titration of the extracted solution with dithizone to determine the contents of bi-valent heavy metals (such as Pb, Cu, Zn, and Cd). This screening method was then directly applied in the field during the sampling campaign in the framework of an Italian–Serbian collaborative project, finalized in the study of metal availability in soils. The results obtained in the field with the rapid test were compared with those obtained in the laboratory following the conventional procedure commonly used to evaluate metal bioavailability (diethylenetriaminepentaacetic extraction). Moreover, selected samples were analyzed sequentially in the laboratory using the standardized BCR three-step sequential extraction procedure. The screening test gave results conceptually in good agreement with those obtained via the BCR procedure. These preliminary data show that the proposed screening test is a reliable method for the preliminary rapid evaluation of metal total concentrations and of potential metal mobility in soils, supporting sampling activities directly in the field.     

Predicting support for non‐pharmaceutical interventions during infectious outbreaks: a four region analysis

Non‐pharmaceutical interventions (NPIs) are an important public health tool for responding to infectious disease outbreaks, including pandemics. However, little is known about the individual characteristics associated with support for NPIs, or whether they are consistent across regions. This study draws on survey data from four regions—Hong Kong, Singapore, Taiwan, and the United States—collected following the Severe Acute Respiratory Syndrome (SARS) outbreak of 2002–03, and employs regression techniques to estimate predictors of NPI support. It finds that characteristics associated with NPI support vary widely by region, possibly because of cultural variation and prior experience, and that minority groups tend to be less supportive of NPIs when arrest is the consequence of noncompliance. Prior experience of face‐mask usage also results in increased support for future usage, as well as other NPIs. Policymakers should be attentive to local preferences and to the application of compulsory interventions. It is speculated here that some public health interventions may serve as ‘gateway’ exposures to future public health interventions.     

Contribution of a municipal solid waste incinerator to the trace metals in the surrounding soil

This study analyses the pedological environment of the area near a municipal waste incinerator that has been operating in the south-east district of Pisa for approximately 20?years. There are many other industrial activities in the area besides the incinerator, which represent possible sources of pollution, as well as heavy road traffic. The study area was defined by a 0-4-km zone around the site with a population of approximately 12,000 residents. The study included the physical and chemical characterisation of 100 samples of soil and an analysis of trace metals such as Cr, Ni, Pb, Zn, Hg, As and Cd. The samples were grouped into soil use categories. The results showed Zn, Pb and Hg correlated with their potentially mobile fractions, and suggested an anthropic contribution to their presence in the soil. Ni, Cr and As showed values attributable to a lithological origin. This was consistent with the PCA results. The aim was to define the environmental state of the soil of the area in order to create a reference for future research and to verify the possible presence of pollution from other sources (local industrial activities and traffic).