Visible-light driven oxidation of gaseous aliphatic alcohols to the corresponding carbonyls via TiO2 sensitized by a perylene derivative

Sensitized P25 TiO₂ was prepared by wet impregnation with a home-prepared perylene dye, i.e., N,N′-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylene-tetracarboxylic acid diimide dichloride (PZPER). Energy levels of PZPER were found to be compatible with those of TiO₂ allowing fast electron transfer. The obtained catalyst has been characterized and used in the gas-phase partial oxidation of aliphatic primary and secondary alcohols, i.e., methanol, ethanol, and 2-propanol. The reaction was carried out under cut-off (λ?>?400 nm) simulated solar radiation in O₂ atmosphere. The perylene derivative allowed a good absorbance of visible radiation thanks to its low optical energy gap (2.6 eV) which was evaluated by cyclic voltammetry. The optimal organic sensitizing amount was found to be 5.6 % w/w in terms of yield in carbonyl derivatives. Moreover, no change in reactivity/selectivity was observed after 10-h irradiation thus confirming the catalyst stability. Yields into formaldehyde, acetaldehyde, and acetone were 67, 70, and 96 %, respectively. No significant amounts of organic byproducts were detected but for methanol oxidation, whereas a minor amount of the substrate degraded to CO₂.     

Examining green public procurement using content analysis: existing difficulties for procurers and useful recommendations

Green public procurement (GPP) promises great potential for improving the environmental impact of many public organizations. However, the effects this instrument will have in the near future are unclear as there is little evidence on its exact level of engagement. This study thus aims to analyze the contents of tenders in terms of green criteria by specifically focusing on the building and construction sector. A total of 164 Italian public tenders were analyzed according to a protocol of analysis based on the GPP toolkit developed by the European Commission. Starting from a content analysis used in previous studies, a complete list of green criteria was developed in order to investigate their prevalence in the sample selected, with the aim of exploring their frequency, distribution and correlation. The results revealed a limited use of green criteria, which were mainly included as technical specifications and award criteria, thus shedding light on the difficulties that procurers are experiencing in the implementation of GPP practices. Several suggestions for policy makers and managers are identified for a better and faster implementation of green public procurement tools and methods.     

Temporal trends of elements in Turin (Italy) atmospheric particulate matter from 1976 to 2001

The temporal trends of major, minor and trace elements in the total atmospheric particulate sampled in the urban area of Turin (Italy) were determined for the following years: 1976, 1986, 1996 and 2001. The wavelength dispersive X-ray fluorescence (WD-XRF) technique was adopted to determine the concentrations of Ba, Br, Ca, Cl, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, S, Ti and Zn. A smaller number of samples was also analysed by ICP atomic emission spectroscopy (ICP-AES) and the results were compared with those obtained by WD-XRF to confirm their validity. A clear seasonal pattern with higher concentrations of the aforementioned elements in the cold periods was observed. Moreover, a change in the chemical composition of atmospheric particulate matter was evidenced, particularly between the first (1976 and 1986) and the last (1996 and 2001) years. This change can be attributed both to the greater contribution of Pb and Br to atmospheric pollution in the past and, in recent years, to the higher level of pollutants associated with increased vehicular traffic and industrial activities. The application of chemometric techniques (Principal Component Analysis and Cluster Analysis) allowed us to speculate about the main emitting sources influencing the total atmospheric particulate in these years.     

Do penguins dare to walk at night? Visual cues influence king penguin colony arrivals and departures

Orientation based on visual cues can be extremely difficult in crowded bird colonies due to the presence of many individuals. We studied king penguins (Aptenodytes patagonicus) that live in dense colonies and are constantly faced with such problems. Our aims were to describe adult penguin homing paths on land and to test whether visual cues are important for their orientation in the colony. We also tested the hypothesis that older penguins should be better able to cope with limited visual cues due to their greater experience. We collected and examined GPS paths of homing penguins. In addition, we analyzed 8 months of penguin arrivals to and departures from the colony using data from an automatic identification system. We found that birds rearing chicks did not minimize their traveling time on land and did not proceed to their young (located in crèches) along straight paths. Moreover, breeding birds' arrivals and departures were affected by the time of day and luminosity levels. Our data suggest that king penguins prefer to move in and out of the colony when visual cues are available. Still, they are capable of navigating even in complete darkness, and this ability seems to develop over the years, with older breeding birds more likely to move through the colony at nighttime luminosity levels. This study is the first step in unveiling the mysteries of king penguin orientation on land.     

Tetrabromobisphenol A (TBBPA): A controversial environmental pollutant

Tetrabromobisphenol A(TBBPA) is one of the most widely used brominated flame retardants and is extensively used in electronic equipment, furniture, plastics, and textiles. It is frequently detected in water, soil, air, and organisms, including humans, and has raised concerns in the scientific community regarding its potential adverse health effects. Human exposure to TBBPA is mainly via diet, respiration, and skin contact. Various in vivo and in vitro studies based on animal and cell models have...     

A human embryonic stem cell-based in vitro model revealed that ultrafine carbon particles may cause skin inflammation and psoriasis

Air pollution has been linked to many health issues,including skin conditions,especially in children.Among all the atmospheric pollutants,ultrafine particles have been deemed very dangerous since they can readily penetrate the lungs and skin,and be absorbed into the bloodstream.Here,we employed a human embryonic stem cell(h ESC)-based differentiation system towards keratinocytes,to test the effects of ultrafine carbon particles,which mimic ambient ultrafine particles,at environment related conce...     

Outcome of fetal echogenic bowel: A systematic review and meta-analysis

The main aim of this systematic review was to explore the outcome of fetuses with isolated echogenic bowel (EB) on antenatal ultrasound. Inclusion criteria were singleton pregnancies with isolated EB no associated major structural anomalies at the time of diagnosis. The outcomes observed were: chromosomal anomalies, cystic fibrosis (CF), associated structural anomalies detected only at follow-up scans and at birth, regression during pregnancy, congenital infections, intra-uterine (IUD), neonatal (NND) and perinatal (PND) death. Twenty-five studies (12 971 fetuses) were included. Chromosomal anomalies occurred in 3.3% of the fetuses, mainly Trisomy 21 and aneuploidies involving the sex chromosomes. Cystic fibrosis occurred in 2.2%. Congenital infections affected 2.2%, mainly congenital Cytomegalovirus (CMV) infection. The majority of fetuses with EB experienced regression or disappearance of the EB at follow-up scans. Associated anomalies were detected at a follow-up scan in 1.8%. Associated anomalies were detected at birth and missed at ultrasound in 2.1% of cases. IUD occurred in 3.2% of cases while the corresponding figures for NND and PND were 0.4% and 3.1%. Fetuses with EB are at increased risk of adverse perinatal outcome, highlighting the need for a thorough antenatal management and postnatal follow-up. Assessment during pregnancy and after birth should be performed in order to look for signs of fetal aneuploidy, congenital infections and associated structural anomalies.     

Yttrium recovery from primary and secondary sources: A review of main hydrometallurgical processes

Yttrium is important rare earths (REs) used in numerous fields, mainly in the phosphor powders for low-energy lighting. The uses of these elements, especially for high-tech products are increased in recent years and combined with the scarcity of the resources and the environmental impact of the technologies to extract them from ores make the recycling waste, that contain Y and other RE, a priority.The present review summarized the main hydrometallurgical technologies to extract Y from ores, contaminated solutions, WEEE and generic wastes. Before to discuss the works about the treatment of wastes, the processes to retrieval Y from ores are discussed, since the processes are similar and derived from those already developed for the extraction from primary sources.Particular attention was given to the recovery of Y from WEEE because the recycle of them is important not only for economical point of view, considering its value, but also for environmental impact that this could be generated if not properly disposal.     

A holistic life cycle analysis of waste management scenarios at increasing source segregation intensity: The case of an Italian urban area

Life cycle analysis of several waste management scenarios for an Italian urban area was performed on the basis of different source segregation collection (SS) intensities from 0% up to 52%. Source segregated waste was recycled and or/recovered by composting. Residual waste management options were by landfilling, incineration with energy recovery or solid recovered fuel (SRF) production to substitute for coal. The increase in fuel and materials consumption due to increase in SS had negligible influence on the environmental impact of the system. Recycling operations such as incineration and SRF were always advantageous for impact reduction. There was lower impact for an SS of 52% even though the difference with the SS intensity of 35% was quite limited, about 15%. In all the configurations analyzed, the best environmental performance was achieved for the management system producing SRF by the biodrying process.     

Recovery of yttrium from fluorescent powder of cathode ray tube,CRT: Zn removal by sulphide precipitation

This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2² full factorial plan and the highest extraction yields for yttrium and zinc equal to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H₂O₂ concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction.Two series of precipitation tests for zinc are carried out: a 2² full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na₂S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%.Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%.