Impact of source segregation intensity of solid waste on fuel consumption and collection costs

Fuel consumption and collection costs of solid waste were evaluated by the aid of a simulation model for a given collection area of a medium-sized Italian city. Using the model it is possible to calculate time, collected waste and fuel consumption for a given waste collection route. Starting from the data for the current waste collection scenario with a Source Segregated (SS) intensity of 25%, all the main model error evaluated was ?1.2. SS intensity scenarios of 25%, 30%, 35% and 52% were simulated. Results showed an increase in the average fuel consumed by the collection vehicles that went from about 3.3 L/tonne for 25% SS intensity to about 3.8 L/tonne for a SS intensity of 52%. Direct collection costs, including crews and vehicle purchase, ranged from about 40 €/tonne to about 70 €/tonne, respectively, for 25% and 52% SS intensity. The increase in fuel consumption and collection costs depends on the density of the waste collected, on the collection vehicle compaction ratio and on the waste collection vehicle utilization factor (WCVUF). In particular a reduction of about 50% of the WCVUF can lead to an average increase of about 80% in fuel consumption and 100% in collection costs.     

Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation

A novel hydrometallurgical process was proposed for selective recovery of Cu, Ag, Au and Pd from waste printed circuit boards (PCBs). More than 99% of copper content was dissolved by using two consecutive sulfuric acid leaching steps in the presence of H₂O₂ as oxidizing agents. The solid residue of 2nd leaching step was treated by acidic thiourea in the presence of ferric iron as oxidizing agent and 85.76% Au and 71.36% Ag dissolution was achieved. The precipitation of Au and Ag from acidic thiourea leachate was investigated by using different amounts of sodium borohydride (SBH) as a reducing agent. The leaching of Pd and remained gold from the solid reside of 3rd leaching step was performed in NaClO-HCl-H₂O₂ leaching system and the effect of different parameters was investigated. The leaching of Pd and specially Au increased by increasing the NaClO concentration up to 10 V% and any further increasing the NaClO concentration has a negligible effect. The leaching of Pd and Au increased by increasing the HCl concentration from 2.5 to 5 M. The leaching of Pd and Au were endothermic and raising the temperature had a positive effect on leaching efficiency. The kinetics of Pd leaching was quite fast and after 30 min complete leaching of Pd was achieved, while the leaching of Au need a longer contact time. The best conditions for leaching of Pd and Au in NaClO-HCl-H₂O₂ leaching system were determined to be 5 M HCl, 1 V% H₂O₂, 10 V% NaClO at 336 K for 3 h with a solid/liquid ratio of 1/10. 100% of Pd and Au of what was in the chloride leachate were precipitated by using 2 g/L SBH. Finally, a process flow sheet for the recovery of Cu, Ag, Au and Pd from PCB was proposed.     

Urban Mining: Quality and quantity of recyclable and recoverable material mechanically and physically extractable from residual waste

The mechanically sorted dry fraction (MSDF) and Fines (<20 mm) arising from the mechanical biological treatment of residual municipal solid waste (RMSW) contains respectively about 11% w/w each of recyclable and recoverable materials. Processing a large sample of MSDF in an existing full-scale mechanical sorting facility equipped with near infrared and 2-3 dimensional selectors led to the extraction of about 6% w/w of recyclables with respect to the RMSW weight. Maximum selection efficiency was achieved for metals, about 98% w/w, whereas it was lower for Waste Electrical and Electronic Equipment (WEEE), about 2% w/w. After a simulated lab scale soil washing treatment it was possible to extract about 2% w/w of inert exploitable substances recoverable as construction materials, with respect to the amount of RMSW. The passing curve showed that inert materials were mainly sand with a particle size ranging from 0.063 to 2 mm. Leaching tests showed quite low heavy metal concentrations with the exception of the particles retained by the 0.5 mm sieve. A minimum pollutant concentration was in the leachate from the 10 and 20 mm particle size fractions.     

Explosion behavior of hydrogen–methane/air mixtures

The effects of enriching natural gas with hydrogen on local flame extinction, combustion instabilities and power output have been widely studied for both stationary and mobile systems. On the contrary, the issues of explosion safety for hydrogen–methane mixtures are still under investigation.In this work, experimental tests were performed in a 5 L closed cylindrical vessel for explosions of hydrogen–methane mixtures in stoichiometric air. Different compositions of hydrogen–methane were tested (from pure methane to pure hydrogen) at varying initial pressures (1, 3 and 6 bar).Results have allowed the quantification of the combined effects of both mixture composition (i.e., hydrogen content in the fuel) and initial pressure on maximum pressure, maximum rate of pressure rise and burning velocity. The measured burning velocities were also correlated by means of a Le Chatelier’s Rule-like formula. Good predictions have been obtained (at any initial pressure), except for mixtures with hydrogen molar content in the fuel higher than 50%.     

Advancing Energy Access Modelling with Geographic Information System Data

One of the main goals in pursuing sustainable development is to provide universal access to modern energy services, notably through the use of off-grid renewable energy technologies. To date, integrated assessment models (IAMs) poorly address energy access targets. In the context of research dedicated to energy scenarios and climate change mitigation in Africa, we attempt to advance the representation of energy access in one such IAM by using GIS data. In a case study for Ethiopia with the TIAM-ECN model, we demonstrate that by enriching an IAM with information derived from GIS databases, insights are obtained that better capture the dynamics of energy access developments, in comparison to conventional IAM analysis of energy technology deployment pathways. When duly accounting for the geographical spread in demography and technology costs in a developing country, we find that many people may gain access to electricity in remote areas thanks to the availability of affordable off-grid power production options that render expensive grid extensions unnecessary. This effect is not explicitly accounted for in most traditional IAMs. By the middle of the century, off-grid technologies could provide affordable electricity to 70% of the Ethiopian population, based almost entirely on renewable sources such as wind, solar and hydropower.     

Recovery agenda for sustainable development post COVID-19 at the country level: developing a fuzzy action priority surface

Environment, Development and Sustainability - As a response to the urgent call for recovery actions against the COVID-19 crisis, this research aims to identify action priority areas...     

Geochemical characterization and health risk assessment in two diversified environmental settings (Southern Italy)

Environmental Geochemistry and Health - An integrated approach using chemical and microbial indicators has been tested in two different sites of the Campania Plain (Southern Italy) with different...     

Energy crops on landfills: functional,environmental, and costs analysis of different landfill configurations

The cultivation of energy crops on landfills represents an important challenge for the near future, as the possibility to use devalued sites for energy production is very attractive. In this study, four scenarios have been assessed and compared with respect to a reference case defined for northern Italy. The scenarios were defined taking into consideration current energy crops issues. In particular, the first three scenarios were based on energy maximisation, phytotreatment ability, and environmental impact, respectively. The fourth scenario was a combination of these characteristics emphasised by the previous scenarios. A multi-criteria analysis, based on economic, energetic, and environmental aspects, was performed. From the analysis, the best scenario resulted to be the fourth, with its ability to pursue several objectives simultaneously and obtain the best score relatively to both environmental and energetic criteria. On the contrary, the economic criterion emerges as weak, as all the considered scenarios showed some limits from this point of view. Important indications for future designs can be derived. The decrease of leachate production due to the presence of energy crops on the top cover, which enhances evapotranspiration, represents a favourable but critical aspect in the definition of the results.     

An Eco-balance of a Recycling Plant for Spent Lead–Acid Batteries

This study applies Life Cycle Assessment (LCA) methodology to present an eco-balance of a recycling plant that treats spent lead–acid batteries. The recycling plant uses pyrometallurgical treatment to obtain lead from spent batteries. The application of LCA methodology (ISO 14040 series) enabled us to assess the potential environmental impacts arising from the recycling plants operations. Thus, net emissions of greenhouse gases as well as other major environmental consequences were examined and hot spots inside the recycling plant were identified. A sensitivity analysis was also performed on certain variables to evaluate their effect on the LCA study. The LCA of a recycling plant for spent lead–acid batteries presented shows that this methodology allows all of the major environmental consequences associated with lead recycling using the pyrometallurgical process to be examined. The study highlights areas in which environmental improvements are easily achievable by a business, providing a basis for suggestions to minimize the environmental impact of its production phases, improving process and company performance in environmental terms.     

Brazilian Amazonia: Industrial development and environmental monitoring

After a critical analysis of the strategies for conservation of the environment in Latin America and of large-scale development projects (agriculture and livestock raising, mining and electrical power plants) in the Amazon region of Brazil, this paper deals with the use of high-resolution satellite imagery for environmental monitoring. Two areas were considered in the study, Tucurui and Altamira. Spot/XS and Landsat/TM multispectral images were used, together with color aerial photographs of these areas. A computer-assisted visual interpretation procedure was employed to analyze images, and linear multispectral transformation was applied in selected subscenes in order to improve information extraction. The results indicate that high-resolution satellite imagery is generally compatible with the scale of the environmental problems in Amazonia and is a very efficient source of detailed information at a local scale on many aspects of the environment, in particular for monitoring changes over time in selected areas. Therefore, commercial satellite imagery, processed by specialized software, can accommodate a variety of analysis needs for decision makers and can also be an effective means of verification of international agreements on conservation of the environment in Amazonia.