Relationship between antibiotic residues and occurrence of resistant bacteria in Nile tilapia (Oreochromisniloticus) cultured in cage-farm

The aim of this study was to investigate the relationship between antibiotic residues found in the muscle of cage-farm-raised Nile tilapia (Oreochromisniloticus), the occurrence of resistant bacteria, and the sanitary practices adopted by farmers in Ilha Solteira reservoir, Brazil. Nine fish (three small fish, 40–200 g; three medium-sized fish, 200–500 g; and three large fish, 500–800 g) were collected from four cage farms every three months from April 2013 to January 2014. Ten antibiotic residues were determined using liquid chromatography-mass spectrometry, and bacteria were isolated and tested for antibiotic resistance to determine the multiple antibiotic resistance (MAR) index. Only three antibiotics (oxytetracycline, tetracycline, and florfenicol) were detected in the muscle of Nile tilapia, and their residues were the highest in small fish; however, the MAR index was higher in large fish. In addition, a direct positive relationship between the MAR index and the concentration of antibiotic residues in Nile tilapia was found. Overall, the adoption of prophylactic management practices improved the sanitary status of cage farms, reducing bacterial infections and hampering the development of antibiotic-resistant bacteria.     

Analytic Modeling of Rainwater Harvesting in the Brazilian Semiarid Northeast

During the past two decades, government efforts to provide water access to rural communities in Brazil's semiarid Northeast region have focused on building systems to capture and store rainwater, most importantly through the One Million Cisterns Program (P1MC). This article presents an analytic model based on daily precipitation data to evaluate the sustainability of rainwater capture. Application of this model to analysis of the P1MC reveals the heterogeneous climate in this region causes large spatial variability in the effectiveness of this program. In addition, the size of the area of capture, the run‐off coefficient of the roofs, and the amount of first‐flush diversion also have important effects. This analysis demonstrates while rainwater capture can offer sufficient water for drinking, as a stand‐alone solution it cannot meet P1MC objectives of guaranteeing sustainable and universal access to water for drinking, cooking, and basic hygiene in all regions and years.     

Molecular probes and microarrays for the detection of toxic algae in the genera Dinophysis and Phalacroma (Dinophyta)

Dinophysis and Phalacroma species containing diarrheic shellfish toxins and pectenotoxins occur in coastal temperate waters all year round and prevent the harvesting of mussels during several months each year in regions in Europe, Chile, Japan, and New Zealand. Toxicity varies among morphologically similar species, and a precise identification is needed for early warning systems. Molecular techniques using ribosomal DNA sequences offer a means to identify and detect precisely the potentially toxic species. We designed molecular probes targeting the 18S rDNA at the family and genus levels for Dinophysis and Phalacroma and at the species level for Dinophysis acuminata, Dinophysis acuta, and Dinophysis norvegica, the most commonly occurring, potentially toxic species of these genera in Western European waters. Dot blot hybridizations with polymerase chain reaction (PCR)-amplified rDNA from 17 microalgae were used to demonstrate probe specificity. The probes were modified along with other published fluorescence in situ hybridization and PCR probes and tested for a microarray platform within the MIDTAL project (http://www.midtal.com). The microarray was applied to field samples from Norway and Spain and compared to microscopic cell counts. These probes may be useful for early warning systems and monitoring and can also be used in population dynamic studies to distinguish species and life cycle stages, such as cysts, and their distribution in time and space.     

Comparative analysis of trace contaminants in leachates before and after a pre-oxidation using a solar photo-Fenton reaction

Sanitary landfill leachates are a complex mixture of high-strength organic and inorganic persistent contaminants, which constitute a serious environmental problem. In this study, trace contaminants present in leachates were investigated by gas chromatography-mass spectrometry and gas chromatography-flame ionization detector before and after a pre-oxidation step using a solar photo-Fenton process. More than 40 organic compounds were detected and identified as benzene (0.09?±?0.07 mg?L^-1), trichlorophenol (TCP) (0.18?±?0.12 mg?L^-1), phthalate esters (Di-n-butyl phthalate (DBP), Butyl benzyl phthalate (BBP), Di(2-ethylhexyl) phthalate (DEHP)) (DBP: 0.47?±?0.01 mg?L^-1; BBP: 0.36?±?0.02 mg?L^-1; DEHP: 0.18?±?0.01 mg?L^-1), among others. Toluene, pentachlorophenol, dimethyl phthalate, diethyl phthalate, and Di-n-octyl phthalate were never detected in any of the samples. After the photo-Fenton treatment process, TCP decreased to levels below its detection limit, benzene concentration increased approximately three times, and DBP concentration decreased about 77 % comparatively to the raw leachate sample. The solar photo-Fenton process was considered to be very efficient for the treatment of sanitary landfill leachates, leading to the complete elimination of 24 of the detected micropollutants to levels below their respective detection limits and low to significant abatement of seven other organic compounds, thus resulting in an increase of the leachate biodegradability.     

Persistent Organic Pollutants in gull eggs of two species (Larus michahellis and Larus audouinii) from the Ebro delta Natural Park

The aim of this study was to determine the impact of priority and emerging Persistent Organic Pollutants (POPs) in gull eggs from two species, the scavenger Larus michahellis and the protected species, Larus audouinii. These two species share habitat in the Natural Park of the Ebro delta (Catalonia, Spain). Compounds studied are included or under consideration in the Stockholm Convention and comprise polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), organochlorinated compounds (OCs), perfluorinated compounds (PFCs) and short chain chlorinated paraffins (SCCPs). Four methods based in selective extraction and gas or liquid chromatography coupled to mass spectrometry were used and quality parameters are provided. OC pesticides and marker PCBs were the most abundant chemical families detected in eggs from the two species, followed by PFCs, PBDEs (especially BDE 209) and SCCPs. Dioxin-like PCBs and PCDD/Fs were also detected in all samples. The overall widespread presence of POPs is discussed in terms of feeding habits, bird ecology and anthropogenic pressures in the protected Ebro delta breeding area.     

Effluents and residues from industrial sites for carbon dioxide capture: a review

The adverse effects of climate change calls for the rapid transformation of manufacturing processes to decrease the emissions of carbon dioxide. In particular, a lower carbon footprint can be achieved by capturing carbon dioxide at the site of emission. Here we review the use of industrial effluents, waste and residues to capture carbon dioxide. Waste include steelmaking slag, municipal solid waste incinerator ashes, combustion fly ash, black liquor, paper mill waste, mining waste, cement waste, construction and demolition waste, waste from the organic industry, and flue gas desulfurization gypsum waste. Capture capacities range from 2 to 800 kg of carbon dioxide per ton of waste, depending on processes, waste type and conditions. Cement waste and flue gas desulfurization gypsum waste show the highest capture capacity per ton of waste.

     

Isotopic discrimination as a tool for organic farming certification in sweet pepper

Organic farming is a form of agriculture that excludes the use of synthetic fertilizers, pesticides, and genetically modified organisms. These fertilizers have been traditionally overused in conventional farming to avoid lost revenue, but this often not does not take into account the potential contamination of aquifers and river due to nitrate leaching. Transition to organic farming practices could provide an instrument to reduce contamination and increase potential income. It is difficult to determine to what extent those fertilizers could have been used within a complete traceability of the production process. In this experiment, we evaluated the use of (15)N/(14)N isotopic discrimination in sweet pepper plants to test the hypothesis that synthetic fertilizers significantly reduce (15)N/(14)N compared with exclusively organic practices. Therefore, three common types of organic manures (sheep, hen, or horse) were applied at a rate of 8 kg m(-2) with or without synthetic fertilizer amendments under fully controlled environmental and irrigation conditions. Results indicate that (i) use of synthetic fertilizers significantly reduced (15/14)N(2)vsN(2)atm compared with treatments that only received water; (ii) with respect to the plant organs, old leaves and fruits were more sensitive to the synthetic fertilizer additions with reductions in (15/14)N(2)vsN(2)atm of 24.1 and 27.8%, respectively; and (iii) independently of the organic manure used, no additional fertilization (synthetic or organic) is required before 106 days after transplanting at that dosage because plant fresh weight was not reduced.     

Analysis of the usefulness of biological parameters for the control of activated sludge wastewater treatment plants in an interlaboratory study context

The quality of the sludge in Wastewater Treatment Plants (WWTPs) depends on the suitable colonization of the flocs by microorganisms. Due to the functional importance of these biological constituents, several biological or biological-related parameters have been commonly used for the control of depuration efficiency. According to national and international water regulation recommendations, interlaboratory studies have a great relevance to determine which parameters are more reliable for their extensive application in routine control. However, these studies are also very useful to demonstrate consistency in results from multiple laboratories and to develop reliable and reproducible methodologies which might be necessary for protocol validation and also for accreditation issues to meet regulatory environmental requirements. The main purpose of this work was to assess the results obtained in consecutive interlaboratory assays in order to determine the concordance degree in the application of biological parameters by participating laboratories. Following the international recommendations about these studies, a common working protocol was proposed. Statistical tests indicated that Sludge Index and several routine physical-chemical analyses [V30, Mixed Liquor Suspended Solids (MLSS), Mixed Liquor Volatile Solids (MLVS) and Sludge Volumetric Index (SVI)] show low variability and therefore are suitable tools for laboratory control. Shannon Index and Sludge Biotic Index also presented low variability although a more precise protocol would be necessary, in particular the methodology to count small flagellates. The abundance and identification of protist species showed low concordance among laboratories and three factors were responsible for the low reliability of data: population density, size and morphological distinguishable characters of the specimens.     

Influence of temperature changes on ambient air NO<Subscript>x</Subscript> chemiluminescence measurements

Users of automatic air pollution monitors are largely unaware of how certain parameters, like temperature, can affect readings. The present work examines the influence of temperature changes on chemiluminescence NO(x) measurements made with a Thermo Scientific 42i analyzer, a model widely used in air monitoring networks and air pollution studies. These changes are grouped into two categories according to European Standard EN 14211: (1) changes in the air surrounding the analyzers and (2) changes in the sampled air. First, the sensitivity tests described in Standard EN 14211 were performed to determine whether the analyzer performance was adapted to the requirements of the standard. The analyzer met the performance criteria of both tests; however, some differences were detected in readings with temperature changes even though the temperature compensator was on. Sample temperature changes were studied more deeply as they were the most critical (they cannot be controlled and differences of several tens of degrees can be present in a single day). Significant differences in readings were obtained when changing sample temperature; however, maximum deviations were around 3% for temperature ranges of 15°C. If other possible uncertainty contributions are controlled and temperature variations with respect to the calibration temperature are not higher than 15°C, the effect of temperature changes could be acceptable and no data correction should have to be applied.