Biozide in Gebäudefassaden – ökotoxikologische Effekte, Auswaschung und Belastungsabschätzung für Gewässer

Background, aim and scope Sources of organic micropollutants occuring in surface waters are often unknown. Regarding environmental risk assessments for surface waters, construction materials have as till now, not been given much consideration, although biocides used as preservatives are known to reach urban storm water runoff. The study focused on biocides for facades coatings and aimed (1) to determine ecotoxicological effect values, (2) to quantify the leaching behaviour and (3) to assess the environmental risk for surface waters using a dynamic transport model. Materials and methods Eight biocides used in resin based facade coatings were investigated. Some biocides are substances known as pesticides for agricultural purposes like diuron, carbendazim and terbutryn. Ecotoxicological effect values for aquatic organisms were determined for every biocide. Leaching of four biocides from a render under UV-irradiation has been investigated in the laboratory including the influence of varying temperatures. Using 80 irrigation intervals over 28 days, facade runoff was sampled and followed by biocide chemical analysis. The total losses were calculated based on the concentration patterns. These data were used for modelling the transport of cybutryn from facades to surface waters. Biocide specific effect values and leaching characteristics have been taken into consideration. Results Acute and chronic effect values as well as predicted no effect concentrations for the investigated biocides indicate their high potential to affect aquatic organisms. The leaching of four biocides (diuron, terbutryn, cybutryn, carbendazim) from the facade render under the experimental conditions delivers high concentrations in the beginning followed by an exponential decrease. Rising temperature increased the concentration of biocides in the runoff. The total losses were between 7?% and 29?% depending on the substances. More than half of the losses occur in the runoff within the first 15 min of runoff from a 60 min irrigation cycle. The modelling result for cybutryn underlines its high environmental risk for small surface waters. Discussion The leaching of the biocides, their potential ecotoxic effects and persistence show clearly that the environmental risk for surface waters and soils seems to be high for certain biocides; whereas for others the risk seems to be significantly lower. With respect water quality criteria, polluted facades runoff has to be diluted before runoff can enter the discharge. Diuron and carbendazim are however also used as pesticides and preservatives for other materials and cybutryn is also used as an antifouling agent. All pathways have to be evaluated in order to identify relevant sources and to act more efficiently with respect to water and soil protection. Conclusions Concentrations with high environmental risk are expected at new facades, especially at facades with thermal insulation. With the given low predicted no effect concentrations in a range of a few ng/L and large amounts of biocides applied in paints and renders, the environmental risk for common biocides used in facade coatings has to be investigated in laboratory and field scale. It seems plausible that source control measures as the most efficient and sustainable precautionary principle need to be evaluated. Recommendations and perspectives Biocides and additives applied in construction materials have to be taken into consideration as relevant sources when evaluating the quality of storm water runoff, discharge into urban areas and the impact to soil and surface waters. A sustainable construction material management and storm water management are required. It is expected that ongoing laboratory and field studies with exterior paints, renders and flat sheets for waterproofing containing biocides and additives will give further insight into their environmental impact.     

Optimising the preparation of activated carbon from digested sewage sludge and coconut husk.

Preparation of activated carbon from sewage sludge is a promising way to dispose of sewage sludge as well as to produce a low-cost adsorbent for pollutant removal. This research work aimed to optimise the condition for activated carbon preparation from anaerobically digested sewage sludge with the additive coconut husk. The sewage sludge sample was mixed with the additive coconut husk. The preparation condition variables investigated involved the concentration of the ZnCl2 solutions, heating temperature, dwell time and heating rate in pyrolysis and the mixing ratio of coconut husk to sewage sludge. Surface area, pore size distribution, aqueous phenol adsorption capacity and the production yield of the final products were determined and compared. Experimental results revealed that low concentrations of ZnCl2 solution tended to improve the microporosity of the final product. Heating temperature had a considerable impact on the surface area, pore size distribution and phenol adsorption capacity of the final products, whereas dwell time and heating rate performed comparatively insignificantly. The effect of increasing the mixing ratio of coconut husk to sewage sludge was principally to increase the microporosity of the final products. The activated carbon with the highest BET surface area was produced with the activation of 5 M ZnCl2 solution and, thereafter, pyrolysis at a heating temperature of 500 degrees C for 2 h with a heating rate of 10 degrees C/min. The mixing ratio of 1:4 in terms of coconut husk to sewage sludge based on their dried weights was found to be most cost effective.     

Pflanzliche Zellkulturtechniken als Züchtungsschritt am Beispiel Raps

A supplementation of classical plant breeding is now necessary due to the limitations imposed by available genetic variability and the slowness of the method. Therefore, cell culture techniques could play an important role in the future. Using rape seed, in which plants derived from anther culture and in vitro mutagenesis are already field tested, it has been shown that, in this case, somatic genetics is very close to becoming a practical method. For most of the other crop plants, in particular the cereals, no such unconventional breeding techniques have yet been satisfactorily established for commercial use.     

Nitrate-reductase activity and in vivo nitrate-reduction rate in Ulva rigida illuminated by blue light

In the marine green alga Ulva rigida C. Agardh, nitrate reductase (NR) is synergetically induced by blue light and nitrate. The present study examines the effect of blue light and a large NO ₃ ^– pulse (0.3 mM) on relevant variables of NO ₃ ^– -assimilation such as NO ₃ ^– -uptake, intracellular NO ₃ ^– -storage, NR activity, in vivo NO ₃ ^– -reduction rate and NO ₂ ^– and NH ₄ ⁺ -accumulation. Nitrate uptake started immediately upon addition of NO ₃ ^– , suggesting the presence of a constitutive carrier, however in the first 1.5 to 2 h, periods of net NO ₃ ^– efflux were frequent. After this time, NO ₃ ^– -uptake and intracellular NO ₃ ^– -accumulation proceeded linearly with time, suggesting the existence of a different NO ₃ ^– -uptake mechanism, which seems to be inducible. Our results indicate that in vivo NO ₃ ^– -reduction is not exclusively dependent on the potential NR activity. In U. rigida, during the first 2 h after a NO ₃ ^– pulse (300 M) there were clear indications that the induction state of the NO ₃ ^– -carrier limits the reduction rate of NO ₃ ^– . Once the induction of the NO ₃ ^– -transporter had been completed (1.5 to 2 h), the NO ₃ ^– -assimilation pathway reached a steady state, NO ₃ ^– -uptake rate, NO ₃ ^– -reduction rate and NO ₂ ^– and NH ₄ ⁺ -accumulation being linear with time. Since the reduction of NO ₃ ^– leads mainly to the accumulation of NH ₄ ⁺ , we conclude that, after the NO ₃ ^– -reduction itself, NH ₄ ⁺ -fixation into carbon skeletons is the limiting step in the assimilation of NO ₃ ^– by U. rigida under blue light.     

UV induces reactive oxygen species,damages sperm,and impairs fertilisation in the sea urchin <Emphasis Type="Italic">Anthocidaris crassispina</Emphasis>

We demonstrated that environmentally relevant levels of UVA and UVB can reduce sperm motility (UVA: by 38–58%; UVB: by 42–85%; P < 0.05) and subsequently fertilisation success (UVA: by 38–72%; UVB: by 91–98%; P < 0.05) of urchins (Anthocidaris crassispina) in a dose-dependent manner, implicating that recruitment of urchin populations might be reduced by UVR (ultraviolet radiation) prevailing in their natural habitats. Concomitantly, reactive oxygen species (ROS) production was enhanced by UVA and UVB in a dose-dependent manner (UVA: by 1.3-fold; UVB: by 6.6–7.3-fold; P < 0.05), and the increase in ROS resulted in an increase in lipid peroxidation (LPO) in urchin sperm (UVA: by 4.2–7.2-fold; UVB: by 2.3–2.7-fold; P < 0.05). This study demonstrated that ROS production and oxidative damages enhanced by UVR may account for the observed declines in sperm motility and fertilisation, and suggests that levels of UVR prevailing in the environment may pose a significant threat to the reproductive success of natural populations of urchins spawning in shallow waters.