Northern Rivers Ecosystem Initiative: Nutrients and Dissolved Oxygen – Issues and Impacts

Anthropogenic inputs of nitrogen (N), phosphorus (P) and oxygen-consuming material to aquatic ecosystems can change nutrient dynamics, deplete oxygen, and change abundance and diversity of aquatic plants and animals. The Northern Rivers Ecosystem Initiative required a research and assessment program to establish the contribution of pulp mill and sewage discharges to eutrophication and depressions in dissolved oxygen (DO) in the Athabasca and Wapiti rivers of northern Alberta, Canada and examine the adequacy of existing guidelines for protecting these systems. Analysis of long-term data showed that total N (TN) and total P (TP) concentrations in exposed river reaches exceeded concentrations in reference reaches by ≤ 2 times for the Athabasca River, and by 9.6 (TP) and 2.6 (TN) times for the Wapiti River. Results from nutrient limitation experiments conducted in situ and in mesocosms showed that benthic algal production was nutrient sufficient downstream of pulp mill discharges but constrained in upper river reaches by insufficient P (Athabasca River) or N + P (Wapiti River). Dissolved oxygen (DO) concentrations in both rivers declined during winter such that median concentrations in the Athabasca River 945 km downstream of the headwaters were approximately 8 mg L⁻¹ in mid-February. Although water column DO rarely approached the guideline of 6.5 mg L⁻¹, DO studies undertaken in the Wapiti River showed that pore water DO often failed to meet this guideline and could not be predicted from water column DO. Results from this integrated program of monitoring and experimentation have improved understanding of the interactions between nutrients, DO and aquatic ecosystem productivity and resulted in recommendations for revisions to nutrient and DO guidelines for these northern rivers.The Canadian Crown reserves the right to retain a non-exclusive, royalty free licence in and to any copyright.     

Linking stream and landscape trajectories in the southern Appalachians

A proactive sampling strategy was designed and implemented in 2000 to document changes in streams whose catchment land uses were predicted to change over the next two decades due to increased building density. Diatoms, macroinvertebrates, fishes, suspended sediment, dissolved solids, and bed composition were measured at two reference sites and six sites where a socioeconomic model suggested new building construction would influence stream ecosystems in the future; we label these "hazard sites." The six hazard sites were located in catchments with forested and agricultural land use histories. Diatoms were species-poor at reference sites, where riparian forest cover was significantly higher than all other sites. Cluster analysis, Wishart's distance function, non-metric multidimensional scaling, indicator species analysis, and t-tests show that macroinvertebrate assemblages, fish assemblages, in situ physical measures, and catchment land use and land cover were different between streams whose catchments were mostly forested, relative to those with agricultural land use histories and varying levels of current and predicted development. Comparing initial results with other regional studies, we predict homogenization of fauna with increased nutrient inputs and sediment associated with agricultural sites where more intense building activities are occurring. Based on statistical separability of sampled sites, catchment classes were identified and mapped throughout an 8,600 km(2) region in western North Carolina's Blue Ridge physiographic province. The classification is a generalized representation of two ongoing trajectories of land use change that we suggest will support streams with diverging biota and physical conditions over the next two decades.     

Feasibility of ultraviolet-light-emitting diodes as an alternative light source for photocatalysis

The objective of this study was to determine whether ultraviolet-light-emitting diodes (UV-LEDs) could serve as an efficient photon source for heterogeneous photocatalytic oxidation (PCO). An LED module consisting of 12 high-power UV-A (lambda max = 365 nm) LEDs was designed to be interchangeable with a UV-A fluorescent black light blue (BLB) lamp for a bench scale annular reactor packed with silica-titania composite (STC) pellets. Lighting and thermal properties of the module were characterized to assess its uniformity and total irradiance. A forward current (I(F)) of 100 mA delivered an average irradiance of 4.0 mW cm(-2) at a distance of 8 mm, which is equivalent to the maximum output of the BLB, but the irradiance of the LED module was less uniform than that of the BLB. The LED and BLB reactors were tested for the oxidization of ethanol (50 ppm(v)) in a continuous-flow-through mode with 0.94 sec residence time. At the same average irradiance, the UV-A LED reactor resulted in a lower CO2 production rate (19.8 vs. 28.6 nmol L(-1) s(-1)), lower ethanol removal (80% vs. 91%), and lower mineralization efficiency (28% vs. 44%) than the UV-A BLB reactor. Ethanol mineralization was enhanced with the increase of the irradiance at the catalyst surface. This result suggests that reduced ethanol mineralization in the LED reactor relative to the BLB reactor at the same average irradiance could be attributed to the nonuniform irradiance over the photocatalyst, that is, a portion of the catalyst was exposed to less than the average irradiance. The potential of UV-A LEDs may be fully realized by optimizing the light distribution over the catalyst and utilizing their instantaneous "on" and "off" feature for periodic irradiation. Nevertheless, our results also showed that the current UV-A LED module had the same wall plug efficiency (WPE) of 13% as that of the UV-A BLB, demonstrating that UV-A LEDs are a viable photon source both in terms of WPE and PCO efficiency.     

Climate change adaptation and sustainable regional development: a case study for the Federal State of Brandenburg, Germany

Located in a relatively dry region and characterized by mainly sandy soils, the German Federal State of Brandenburg (surrounding the capital city of Berlin) is especially vulnerable to climate change impacts (e.g., summer droughts) and cascading effects on ecological systems (e.g., decreasing ground water tables, water stress, fire risk, productivity losses) with socioeconomic implications. Furthermore, a complex interplay of unemployment, rural exodus, and an aging population challenges this structurally weak region. We discuss adaptation measures that are either implemented or planned, as well as research into adaptation strategies to climate change for the sectors forestry, agriculture, and water management as well as in nature conservation in light of socioeconomic and ecological challenges and benefits. In doing so, we adopt a systemic view of Brandenburg where the sectors discussed are seen as subsystems embedded in a larger regional system. This at least partially holarchical approach enables the identification of conflicts between adaptation measures, but also of synergies among the sectors that pertain to successful adaptation to climate change. The insights gained ultimately highlight the need for cross-sectoral, adaptive management practices that jointly target a sustainable regional development.     

Monitoring Sulfur Dioxide with Lead Peroxide Cylinders

The results of source tests to demonstrate the applicability of direct-flame incineration for the control of the effluent from a wire-enameling bake oven are presented. The tests were conducted with a portable direct-flame incinerator under actual plant conditions. The efficiency of direct-flame incineration was established at incineration temperatures of 1000F, 1200, and 1400°F. Evaluation of incineration efficiency was performed by both analysis and quantitative odor measurement using an odor panel.     

The Use of Combined-Cycle Power Systems in Nonpolluting Central Stations

The body of information presented in this paper is directed to power engineers oncerned with reducing pollution from future electric utility power stations. An Air Pollution Control Office sponsored study of advanced-cycle power systems and methods of desulfurizing fuels investigated a large number of conventional and nonconventional power systems for use by electric utilities. These systems included current and advanced steam systems, steam systems with topping and bottoming cycles, closed-cycle gas turbines, and open-cycle gas turbines alone and combined with steam systems. Also considered were various methods for desulfurizing coal and residual oil, such as mechanical and chemical separation, hydrodesulfurization and gasification followed by gas clean up. The major conclusion of this study is that the most effective and economical means of reducing objectionable effluents from future fossil-fueled power stations appears to be gasification of high-sulfur fuel to produce a low-heating-value fuel gas for use in a combined gas turbine and steam (COGAS) power system. Recent and prospective advances in military and commercial aircraft gas turbine technology, particularly in the area of high-temperature operation, can be applied to industrial gas turbines to yield the high-performance, low-cost, and long-lifetime characteristics desired for base-load power generation.

A COGAS pilot plant burning gasified coal should be built at the earliest possible time. Experience gained in the pilot plant could allow introduction of commercial sized stations within this decade.     

Simulation and analysis of solute transport in 2D fracture/pipe networks: the SOLFRAC program

The Time Domain Random Walk (TDRW) method has been recently developed by Delay and Bodin [Delay, F. and Bodin, J., 2001. Time domain random walk method to simulate transport by advection-dispersion and matrix diffusion in fracture networks. Geophys. Res. Lett., 28(21): 4051-4054.] and Bodin et al. [Bodin, J., Porel, G. and Delay, F., 2003c. Simulation of solute transport in discrete fracture networks using the time domain random walk method. Earth Planet. Sci. Lett., 6566: 1-8.] for simulating solute transport in discrete fracture networks. It is assumed that the fracture network can reasonably be represented by a network of interconnected one-dimensional pipes (i.e. flow channels). Processes accounted for are: (1) advection and hydrodynamic dispersion in the channels, (2) matrix diffusion, (3) diffusion into stagnant zones within the fracture planes, (4) sorption reactions onto the fracture walls and in the matrix, (5) linear decay, and (6) mass sharing at fracture intersections. The TDRW method is handy and very efficient in terms of computation costs since it allows for the one-step calculation of the particle residence time in each bond of the network. This method has been programmed in C++, and efforts have been made to develop an efficient and user-friendly software, called SOLFRAC. This program is freely downloadable at the URL (labo.univ-poitiers.fr/hydrasa/intranet/telechargement.htm). It calculates solute transport into 2D pipe networks, while considering different types of injections and different concepts of local dispersion within each flow channel. Post-simulation analyses are also available, such as the mean velocity or the macroscopic dispersion at the scale of the entire network. The program may be used to evaluate how a given transport mechanism influences the macroscopic transport behaviour of fracture networks. It may also be used, as is the case, e.g., with analytical solutions, to interpret laboratory or field tracer test experiments performed in single fractures.     

Issues in monitoring hazardous chemicals in stormwater runoff/discharges from superfund and other hazardous chemical sites

Deficiencies in design and execution render stormwater‐runoff monitoring programs for many hazardous chemical sites inadequate for assessing the potential environmental quality and public health impacts of chemicals in the runoff. Two pervasive problems are the use of analytical methods that are inadequate for measuring certain hazardous chemicals at potentially hazardous concentrations, and the application of “criteria/standards” that are inappropriate for evaluating the environmental/public health impacts of chemicals. These concerns are most notable for carcinogens and chemicals that bioaccumulate in edible aquatic organisms, including arsenic, chromium, beryllium, mercury, dioxins, organochlorine pesticides (such as DDT), and polychlorinated biphenyls; unrecognized pollutants; and nanomaterials. In order to appropriately evaluate whether the runoff/discharge from a hazardous chemical site is a threat to human health, the analytical methods must be sufficiently sensitive in critical concentration ranges; sampling regimens need to be sufficiently rigorous to provide reliable characterization of the content of the runoff, receiving water, and, for bioaccumulatable chemicals, levels in edible organisms in receiving water. Proper sampling and analysis will then provide data to enable the appropriate criteria/standards to be applied. © 2010 Wiley Periodicals, Inc.     

Improving public health and environmental protection resulting from Superfund site investigation/remediation

A discussion of some of the deficiencies of Superfund and hazardous chemical site investigation and remediation is presented. Of concern is the adequacy of defining the constituents of concern; stormwater‐runoff monitoring; evaluating excessive bioaccumulation of hazardous chemicals in edible organisms; the extent and degree of groundwater pollution; modeling of pollutant transport in the vadose zone; translocation of subsurface pollutants to surface via plant roots, leaves, and flowers; protection of groundwater quality for nonpriority pollutants that impact aesthetic quality; and deficiencies in the quality of site data reports. Examples of these types of problems are discussed with suggestions on the approach that should be followed to improve the quality of site investigation and remediation. © 2004 Wiley Periodicals, Inc.     

The effect of environmental remediation on the cesium-137 levels in white-tailed deer

Due to activities involving nuclear energy research during the latter half of the 1900s, environmental contamination in the form of elevated cesium-137 levels was observed within the Brookhaven National Laboratory, a US Department of Energy facility. Between the years 2000 and 2005, the laboratory carried out a major soil cleanup effort to remove cesium-137 from contaminated sites. In this study, we examine the effectiveness of the cleanup effort by comparing the levels of cesium-137 in the meat of white-tailed deer found within and around the laboratory. Results suggest that the cleanup was effective, with mean concentration of cesium-137 in the meat from within the laboratory decreasing from 2.04 Bq/g prior to 1.22 Bq/g after cleanup. At the current level, the consumption of deer would not pose any human health hazard. Nevertheless, statistically higher levels of cesium-137 were detected in the deer within the laboratory as opposed to levels found in deer 1 mi beyond the laboratory site.