Role of iron chemistry in controlling the release of pollutants from resuspended sediments

Aquatic sediments often contain a large number of chemical contaminants that are potential pollutants. It is often presumed that such contaminants are released to the water column during sediment resuspension and, in there, adversely impact aquatic life and other beneficial uses of the water. However, extensive laboratory and field studies of about 100 contaminated sediments from across the United States that specifically addressed this type of release showed that of about 30 common heavy metals, organic compounds, and other potential pollutants, only manganese II and ammonia were released to then remain in the water column after sediment resuspension. These results indicated that the chemistry of aqueous iron controls the availability of many contaminants in resuspended sediment. The formation of ferric hydroxide during sediment suspension into the water column, as a result of the reaction between ferrous iron in the sediments and dissolved oxygen in the water column, leads to rapid scavenging of many contaminants in the Fe(OH)₃ precipitate. The scavenged contaminants are redeposited in the sediments. This article reviews the role of the aqueous chemistry of iron as it relates to controlling the release of potential pollutants from resuspended sediments. © 2005 Wiley Periodicals, Inc.     

The Smogless Automobile

Demands for high performance and reliability of electrostatic precipitators for collection of fly ash from low sulfur fuels has led to rapid escalation of sizes and uncertainties in sizings of cold-side precipitators. This has led to utilization of the so-called “hot-side” precipitator. The underlying concept of hot-side precipitation is the avoidance of the necessity to operate the precipitator under high resistivity conditions. Data on in-situ measurements of resistivity of low sulfur fuel ash, as well as performance parameters of a number of operating installations, will be reviewed. These data will demonstrate the reduced sensitivity of hot-side precipitator sizing to fuel conditions. Other advantages of hot-side precipitators will be discussed.

Operating experience with hot-side precipitators has focused on structural problems which are peculiar to the larger, higher temperature installations. The nature and solution of these problems will be discussed. General comparative economics of hot-side and cold-side precipitators as they relate to fuel properties will be reviewed.     

Benchmarking road safety performances of countries

In order to obtain political interest in road safety problems and to learn from other countries’ ‘good practices’, it is often helpful to compare one’s own safety situation with that of other countries. In a number of projects tools have been developed for such comparisons. These tools range from simple ratings of countries on their safety outcomes, such as the annual number of fatalities per capita or per kilometre driven by (motor)vehicles to more comprehensive comparisons.These comparisons not only show differences in safety between countries, but to a certain extent also explain such differences in terms of their safety background and measures taken. Finally, tools have been defined to support road safety policy makers in developing possible safety measures or actions. Procedures for such complex safety comparisons have been developed and tested in several so-called SUNflower studies.This promising approach can be further developed into standard procedures for safety comparisons between all countries in the European Union, and other countries worldwide. This paper wishes to outline the development of such standards for the benchmarking of road safety and safety trends as well as procedures for quantifying safety performances of countries.Starting point of this conceptual framework is the so-called SUNflower-pyramid in which three types of indicators are distinguished. The first one of these, the road safety performance indicator, is called an outcome indicator and is based on the number of killed and injured road users. The second indicator type indicates the quality of the implementation of road safety policies: the implementation performance indicators. The third type of indicator indicates the quality of response in policy documents to improve road safety (policy performance indicator). The three types of indicators are embedded in a policy context: the structure and culture of a country, which are considered as background variables.This paper sets out to describe the framework for the development of a comprehensive set of indicators to benchmark road safety performances of countries or of sub-national jurisdictions. The paper also discusses the advantages and disadvantages of combining such indicators and if combined, how to aggregate how different indicators in one composite performance index. It is argued to group countries in different classes with more or less comparable countries. Different procedures are used for this grouping. The results are promising and it is recommended to work with classes of countries.     

Sediment budgets and source determinations using fallout Cesium-137 in a semiarid rangeland watershed,Arizona, USA

Analysis of soil redistribution and sediment sources in semiarid and arid watersheds provides information for implementing management practices to improve rangeland conditions and reduce sediment loads to streams. The purpose of this research was to develop sediment budgets and identify potential sediment sources using ¹³⁷Cs and other soil properties in a series of small semiarid subwatersheds on the USDA ARS Walnut Gulch Experimental Watershed near Tombstone, Arizona, USA. Soils were sampled in a grid pattern on two small subwatersheds and along transects associated with soils and geomorphology on six larger subwatersheds. Soil samples were analyzed for ¹³⁷Cs and selected physical and chemical properties (i.e., bulk density, rocks, particle size, soil organic carbon). Suspended sediment samples collected at measuring flume sites on the Walnut Gulch Experimental Watershed were also analyzed for these properties. Soil redistribution measured using ¹³⁷Cs inventories for a small shrub-dominated subwatershed and a small grass-dominated subwatershed found eroding areas in these subwatersheds were losing −5.6 and −3.2 t ha⁻¹ yr⁻¹, respectively; however, a sediment budget for each of these subwatersheds, including depositional areas, found net soil loss to be −4.3 t ha⁻¹ yr⁻¹ from the shrub-dominated subwatershed and −0.1 t ha⁻¹ yr⁻¹ from the grass-dominated subwatershed. Generally, the suspended sediment collected at the flumes of the six other subwatersheds was enriched in silt and clay. Using a mixing model to determine sediment source indicated that shrub-dominated subwatersheds were contributing most of the suspended sediment that was measured at the outlet flume of the Walnut Gulch Experimental Watershed. The two methodologies (sediment budgets and sediment source analyses) indicate that shrub-dominated systems provide more suspended sediment to the stream systems. The sediment budget studies also suggest that sediment yields measured at the outlet of a watershed may be a poor indicator of actual soil redistribution rates within these semiarid watersheds. Management of these semiarid rangelands must consider techniques that will protect grass-dominated areas from shrub invasion to improve rangeland conditions.     

Effects of a herbicide-insecticide mixture in freshwater microcosms: risk assessment and ecological effect chain

Effects of chronic application of a mixture of the herbicide atrazine and the insecticide lindane were studied in indoor freshwater plankton-dominated microcosms. The macroinvertebrate community was seriously affected at all but the lowest treatment levels, the zooplankton community at the three highest treatment levels, with crustaceans, caddisflies and dipterans being the most sensitive groups. Increased abundance of the phytoplankton taxa Cyclotella sp. was found at the highest treatment level. Threshold levels for lindane, both at population and community level, corresponded well with those reported in the literature. Atrazine produced fewer effects than expected, probably due to decreased grazer stress on the algae as a result of the lindane application. The safety factors set by the Uniform Principles for individual compounds were also found to ensure protection against chronic exposure to a mixture of a herbicide and insecticide at community level, though not always at the population level.     

Real-world vehicle emissions: a summary of the Sixteenth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council held its 16th workshop in March 2006, with 83 presentations describing the most recent mobile source-related emissions research. In this paper, we summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed evaluation of in-use emissions control programs, effects of fuels on emissions, emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Full-Scale Study of Plume Rise At Large Coal-Fired Electric Generating Stations

This paper reports on the plume rise research project conducted by TVA under sponsorship of the U. S. Public Health Service. Plume rise data were collected at six coal-fired, steam-electric generating stations within the TVA system over a 2-year period. Unit ratings ranged from 173 to 704 Mw with stack heights varying from 250 to 600 ft. An instrumented helicopter and special photographic equipment were used to obtain 1580 separate plume observations and significant related meteorological parameters during stable, neutral, and slightly unstable conditions. The 1580 observations were resolved and consolidated into 133 composite observation periods covering 30 to 120 min. Meteorological parameters and other compiled input data were entered into four principal equations for calculation of plume rise, and calculated plume rise values were compared with observed values. Most equations overestimated plume rise in low wind speed. For moderately high wind speeds, the Carson and Moses and the Concawe equations gave best fit.     

Principal Plume Dispersion Models: TVA Power Plants

The body of information presented in this paper is directed to those individuals who may be concerned with principal plume dispersion models at coal-burning power plants. About 20 years of comprehensive field surveillance and documentation of dispersion of power plant emissions for a varied range of unit sizes, stack heights, and meteorological conditions have determined the Tennessee Valley Authority’s interpretation of principal plume dispersion models. TVA’s experience indicates that as unit sizes are increased and taller stacks are constructed, the plume dispersion model associated with maximum surface concentrations changes. Maximum surface concentrations for principal plume dispersion models were approximately equal for the early small plants. However, the coning model was considered the critical plume dispersion model because the frequency of recurrence of surface concentrations from this model was appreciably greater than other models.

There were progressive changes because of an increase in unit sizes and stack heights; the magnitude of maximum surface concentrations from the coning model decreased, and the magnitude (relative to the coning model) of concentrations from the inversion breakup model increased. However, with plumes from newer and larger units with higher stacks, the trapping dispersion model became prominent. Finally, by the time unit size had increased to 900 mw and stack height to about 245 meters, as at Bull Run Power Plant, the magnitude of surface concentrations associated with trapping had increased to such a degree that it became the critical dispersion model identified with power plants of this size.