Commute mode diversity and income inequality: an inter-urban analysis of 148 midsize US cities

Little is known about the relationship between multi-modal transportation environments and aspects of sustainable urban development, such as reduced income inequality and affordable housing. This study, adapted from Molotch and Appelbaum's inter-city differential method, studied 148 semi-isolated mid-size cities. Using U.S. Census data from 2013, we found that increased diversity in commute modality is associated with less income inequality between white and African-American households, as well as between men and women. Commute mode diversity is also associated with higher earnings for white women and African-American men. Our study also shows that cities with more commuter mode diversity are associated with higher home property values and affordable rental markets compared to automobile dependent cities. These results undercut the notion that increasing automobile ownership is a reasonable policy response to urban poverty, and suggest that sustainable transportation policy can produce positive economic gains for cities. This work adds to the growing literature identifying fundamental differences between multimodal and automobile dependent cities.     

Groundwater Impacts on Surface Water and Sediment—Gowanus Canal,Brooklyn, New York

The Gowanus Canal Superfund Site in Brooklyn, New York, is an approximately 1.5‐mile (1.61‐km) long estuary that was historically converted into a canal for industrial and commercial purposes. Three manufactured gas plants (MGPs) were formerly located on the Gowanus Canal and discharged waste into it. Surface sediments remain highly contaminated with polycyclic aromatic hydrocarbons (PAHs) long after the MGPs were razed. A hydrogeologic assessment indicates that groundwater passes through the deeper coal tar–contaminated sediment prior to discharging to the canal. This study was undertaken to investigate if groundwater passing through coal tar–contaminated sediment could be responsible for the ongoing contamination of both surface sediments and surface water in the canal. PAH compound distributions in surface water samples collected from the tidal canal at low tide were compared with PAH compounds found in adjacent groundwater‐monitoring wells, point sources (combined sewer overflows [CSOs]), and surface sediments. The results indicate a strong correlation between PAH contaminant distributions in groundwater, sediment, and surface water, indicating that contaminated groundwater passing through the deeper coal tar–contaminated sediments is the primary mechanism contributing to the contamination of both surface sediment and surface water in the canal. Therefore, any sediment remediation efforts in the Gowanus Canal that fail to evaluate and control the upward transport processes have a high chance of failure due to recontamination from below.  ©2016 Wiley Periodicals, Inc.     

ROLE OF MODELS IN GROUNDWATER MANAGEMENT1

To answer the difficult question of how to integrate operation of ground and surface water supplies into their management plans, the decision-makers must be able to predict the effects of various alternative modes of operation and meteorological conditions on the groundwater basin. Many types of models have been used for simulating the behavior of groundwater basins under these changes. Analog simulators, analog computers, and digital computers have been employed for model development. To achieve plausible models, detailed hydraulic and hydrologic characteristics are required, such as data on transmissivity, storage, and net deep percolation. These data are used in the equations that form the model. Water quality, which cannot be separated from quantity, deserves equal consideration. Recently, considerable efforts have been made to develop water quality prediction tools through the use of modeling techniques.     

Facing limits in oceanic fisheries

Research from the Food and Agriculture Organization of the United Nations (FAO) and fishery scientists indicates that the wild catch offish and other marine life from the oceans will not be able to increase significantly in the future, except through rehabilitation and better management of stocks. Despite the limited potential for bigger catches, fishing fleets have expanded rapidly in recent decades under government subsidies. Fishers now have approximately twice the capacity necessary to make the annual catch from the oceans. The juxtaposition of natural limits and overinvestment has created a crisis situation for the world's fishers, fishing communities and traditional fishing cultures. Part I of this article discusses policy responses at the national and international level. How policy makers respond to the overextension of the marine fishing industry will determine the extent of job loss, hunger and dislocation that will result. Part II, to be published in the Forum's next issue (February 1995), will examine the social aspects of the world's fishing industry, including the demography of fishers, utilization of fisheries products, the relative social contribution of aquaculture and policy responses to overcapacity. Policy makers could enhance the social benefits of marine fisheries — both jobs and food — through a combination of government oversight and community based management.     

WATER QUALITY DURING STORM EVENTS FROM TWO CONSTRUCTED WETLANDS RECEWING MINE DRAINAGE1

ABSTRACT: Flow rates, pH, iron concentration, and manganese concentration were measured during several storm events at two constructed wetlands receiving mine water. During a substantial rain event, flow rates at both the wetland outlets surpassed flow rates at the wetland inlets, reflecting incident rainfall and differences in wetland area at the two sites. A significant positive correlation existed between local rainfall and outflow rates at the larger wetland, but not between rainfall and inflow rates. During storm events, outlet pH, relative to inlet pH, was slightly elevated at the larger wetland, and depressed at the smaller wetland. However, over the course of one year, rainfall was uncorrelated to outlet pH in the larger wetland. A substantial rain event at the smaller wetland resulted in a temporary elevation in outlet iron concentrations, with treatment efficiency reduced to near zero. However, in the larger wetland, outlet iron concentrations were not significantly affected by storm events. Although rainfall and outlet iron concentration were not significant correlates at the larger wetland, flow rate was positively correlated to outlet iron concentration. A normal manganese treatment efficiency of 50 percent at the smaller wetland was reduced to zero during a heavy rain.     

Reviewing the relevance of dioxin and PCB sources for food from animal origin and the need for their inventory,control and management

Background

In the past, cases of PCDD/F and PCB contamination exceeding limits in food from animal origin (eggs, meat or milk) were mainly caused by industrially produced feed. But in the last decade, exceedances of EU limit values were discovered more frequently for PCDD/Fs or dioxin-like(dl)-PCBs from free range chicken, sheep, and beef, often in the absence of any known contamination source.

Results

The German Environment Agency initiated a project to elucidate the entry of PCBs and PCDD/Fs in food related to environmental contamination. This paper summarizes the most important findings. Food products from farm animals sensitive to dioxin/PCB exposure—suckling calves and laying hens housed outdoor—can exceed EU maximum levels at soil concentrations that have previously been considered as safe. Maximum permitted levels can already be exceeded in beef/veal when soil is contaminated around 5 ng PCB-TEQ/kg dry matter (dm). For eggs/broiler, this can occur at a concentration of PCDD/Fs in soil below 5 ng PCDD/F–PCB-TEQ/kg dm. Egg consumers—especially young children—can easily exceed health-based guidance values (TDI). The soil–chicken egg exposure pathway is probably the most sensitive route for human exposure to both dl-PCBs and PCDD/Fs from soil and needs to be considered for soil guidelines. The study also found that calves from suckler cow herds are most prone to the impacts of dl-PCB contamination due to the excretion/accumulation via milk. PCB (and PCDD/F) intake for free-range cattle stems from feed and soil. Daily dl-PCB intake for suckler cow herds must in average be less than 2 ng PCB-TEQ/day. This translates to a maximum concentration in grass of 0.2 ng PCB-TEQ/kg dm which is less than 1/6 of the current EU maximum permitted level. This review compiles sources for PCDD/Fs and PCBs relevant to environmental contamination in respect to food safety. It also includes considerations on assessment of emerging POPs.

Conclusions

The major sources of PCDD/F and dl-PCB contamination of food of animal origin in Germany are (1) soils contaminated from past PCB and PCDD/F releases; (2) PCBs emitted from buildings and constructions; (3) PCBs present at farms. Impacted areas need to be assessed with respect to potential contamination of food-producing animals. Livestock management techniques can reduce exposure to PCDD/Fs and PCBs. Further research and regulatory action are needed to overcome gaps. Control and reduction measures are recommended for emission sources and new listed and emerging POPs to ensure food safety.

     

Principles and application of an in vivo swine assay for the determination of arsenic bioavailability in contaminated matrices

The assessment of arsenic (As) bioavailability from contaminated matrices is a crucial parameter for reducing the uncertainty when estimating exposure for human health risk assessment. In vivo assessment of As utilising swine is considered an appropriate model for human health risk assessment applications as swine are remarkably similar to humans in terms of physiology and As metabolism. While limited in vivo As bioavailability data is available in the literature, few details have been provided regarding technical considerations for performing in vivo assays. This paper describes, with examples, surgical, experimental design and analytical issues associated with performing chronic and acute in vivo swine assays to determine As bioavailability in contaminated soil and food.     

Ethyl carbamate in foods and beverages: a review

Food and beverages contain many toxic chemicals that raise health concerns. Ethyl carbamate (EC) or urethane is the ethyl ester of carbamic acid. It occurs at low level, from ng/L to mg/L, in many fermented foods and beverages. Ethyl carbamate is genotoxic and carcinogenic for a number of species such as mice, rats, hamsters and monkeys. It has been classified as a group 2A carcinogen, “probably carcinogenic to humans”, by the World Health Organization’s International Agency for Research on Cancer (IARC) in 2007. The benchmark dose lower limit of ethyl carbamate is 0.3 mg/kg bw per day and the mean intake of ethyl carbamate from food is approximately 15 ng/kg bw per day. Those levels were calculated for relevant foods including bread, fermented milk products and soy sauce. Alcoholic beverages were not included in this calculation. However, high levels of ethyl carbamate can be found in distillated spirits at concentrations ranging from 0.01 to 12 mg/L depending on to the origin of spirit. Alcoholic drinks should thus be considered as a source of ethyl carbamate. Ethyl carbamate is produced by several chemical mechanisms: first, from urea and various proteins like citrulline produced during the fermentation step and second from cyanide, and hydrocyanic acid, via ethyl carbamate precursors such as cyanate. A large panel of ethyl carbamate formation mechanisms is described from simple ethanolysis of urea in homogeneous liquid phase to photochemical oxidation of cyanide ion or complex heterogeneous gas/solid catalytic reactions. Determination of ethyl carbamate in foods and beverages involves various strategies according to the material, food or beverage, solid or liquid, and according to the concentration, from ng/L to mg/L. Usually, adapted extractive techniques and pre-concentration step are followed by analysis by gas chromatography coupled to mass spectrometry (GC–MS of GC–MS–MS). High performance liquid chromatography (HPLC) and semi-quantitative spectroscopic methods (infra-red) are also proposed as valuable alternatives to the classical but time-consuming GC–MS. Various preventing methods are developed and used in some cases at industrial scale to lower ethyl carbamate levels in food. Two types of preventing methods are described. First, adapted and optimised practices in all step of the chain of foods’ (or beverages) production lead in general to low ethyl carbamate level. Second, the abatement of ethyl carbamate precursors can be done by adapted enzymatic, physical chemical or chemical methods according to the natures of raw materials and conditions of their production processes.     

On dispersion above a forest—Measurements and methods

Data collected over a mixed conifer/deciduous forest at the U.S. Department of Energy’s Savannah River Site in South Carolina using sonic anemometry reveal that on-site and real-time measurements of the velocity component standard deviations, σ_v and σ_w, are preferred for dispersion modeling. Such data are now easily accessible, from the outputs of cost-effective and rugged sonic anemometers. The data streams from these devices allow improvements to conventional methodologies for dispersion modeling. In particular, extrapolation of basic input data from a nearby location to the site of the actual release can be facilitated. In this regard reliance on the velocity statistics σ_v and σ_w appears to be preferred to the conventional σ_θ and σ_?. In the forest situations addressed here, the uncertainties introduced by extrapolating initializing properties (u, θ, σ_θ, and σ_?, or alternatively, σ_v and σ_w) from some location of actual measurement to some nearby location where an actual release occurs are similar to those associated with the spread of the plume itself and must be considered in any prediction of the likelihood of downwind concentration (exposure) exceeding some critical value, i.e., a regulatory standard. Consideration of plume expansion factors related to meander will not necessarily cause predicted downwind maxima within a particular plume to be decreased; however, the probability of exposure to this maximum value at any particular location will be reduced. Three-component sonic anemometers are affordable and reliable, and are now becoming a standard for meteorological monitoring programs subject to regulatory oversight. The time has come for regulatory agencies and the applied dispersion community to replace the traditional discrete sets of dispersion coefficients based on Pasquill stability by the direct input of measured turbulence data.

Implications: The continued endorsement of legacy Pasquill-Gifford stability schemes is presently under discussion among professional groups and regulatory agencies. The present paper is an attempt to introduce some rationality, for the case of a forested environment.