Soil feedback of exotic savanna grass relates to pathogen absence and mycorrhizal selectivity

Enemy release of exotic plants from soil pathogens has been tested by examining plant-soil feedback effects in repetitive growth cycles. However, positive soil feedback may also be due to enhanced benefit from the local arbuscular mycorrhizal fungi (AMF). Few studies actually have tested pathogen effects, and none of them did so in arid savannas. In the Kalahari savanna in Botswana, we compared the soil feedback of the exotic grass Cenchrus biflorus with that of two dominant native grasses, Eragrostis lehmanniana and Aristida meridionalis. The exotic grass had neutral to positive soil feedback, whereas both native grasses showed neutral to negative feedback effects. Isolation and testing of root-inhabiting fungi of E. lehmanniana yielded two host-specific pathogens that did not influence the exotic C. biflorus or the other native grass, A. meridionalis. None of the grasses was affected by the fungi that were isolated from the roots of the exotic C. biflorus. We isolated and compared the AMF community of the native and exotic grasses by polymerase chain reaction-denaturing gradient gel elecrophoresis (PCR-DGGE), targeting AMF 18S rRNA. We used roots from monospecific field stands and from plants grown in pots with mixtures of soils from the monospecific field stands. Three-quarters of the root samples of the exotic grass had two nearly identical sequences, showing 99% similarity with Glomus versiforme. The two native grasses were also associated with distinct bands, but each of these bands occurred in only a fraction of the root samples. The native grasses contained a higher diversity of AMF bands than the exotic grass. Canonical correspondence analyses of the AMF band patterns revealed almost as much difference between the native and exotic grasses as between the native grasses. In conclusion, our results support the hypothesis that release from soil-borne enemies may facilitate local abundance of exotic plants, and we provide the first evidence that these processes may occur in arid savanna ecosystems. Pathogenicity tests implicated the involvement of soil pathogens in the soil feedback responses, and further studies should reveal the functional consequences of the observed high infection with a low diversity of AMF in the roots of exotic plants.     

Physical and ecological thresholds for deposited sediments in streams in agricultural landscapes

Excessive sedimentation in streams and rivers remains a pervasive problem for the protection of aquatic habitat and the sustainability of aquatic communities. Whereas water quality criteria have been determined for suspended sediments in many jurisdictions across North America, comparably little has been done for deposited (also known as bedded) sediments. Through Canada's National Agri-Environmental Standards Initiative, assessment techniques and analytical tools were developed for estimating environmental thresholds for deposited sediments in agricultural watersheds in New Brunswick (NB) and Prince Edward Island (PEI) in the Atlantic Maritimes of Canada. Physical thresholds were developed through assessment of geomorphic metrics, which were then analyzed using y-intercept and 25th percentile approaches. For NB, there was strong agreement in physical thresholds for both analytical approaches (e.g., percent fines <2 mm were 7.5 for y-intercept and 6.9 for 25th percentile approaches). In contrast, physical thresholds for PEI differed considerably between approaches (e.g., percent fines <2 mm were 6.1 for y-intercept and 19.6 for 25th percentile approaches), likely due to a narrower range in agricultural land cover. Cross-calibration of our provisional physical thresholds for NB with ecological (i.e., benthic macroinvertebrate) assessments show that ecological thresholds, calculated as change-points in relationships between Ephemeroptera-Plecoptera-Trichoptera relative abundance or Modified Family Biotic Index and geomorphic criteria, were more liberal than physical thresholds. These results suggest that provisional thresholds developed using geomorphic criteria should demarcate change from the least disturbed condition and reduce the risk of sedimentation degrading benthic ecosystems.     

Using the soil and water assessment tool to estimate achievable water quality targets through implementation of beneficial management practices in an agricultural watershed

Runoff from crop production in agricultural watersheds can cause widespread soil loss and degradation of surface water quality. Beneficial management practices (BMPs) for soil conservation are often implemented as remedial measures because BMPs can reduce soil erosion and improve water quality. However, the efficacy of BMPs may be unknown because it can be affected by many factors, such as farming practices, land-use, soil type, topography, and climatic conditions. As such, it is difficult to estimate the impacts of BMPs on water quality through field experiments alone. In this research, the Soil and Water Assessment Tool was used to estimate achievable performance targets of water quality indicators (sediment and soluble P loadings) after implementation of combinations of selected BMPs in the Black Brook Watershed in northwestern New Brunswick, Canada. Four commonly used BMPs (flow diversion terraces [FDTs], fertilizer reductions, tillage methods, and crop rotations), were considered individually and in different combinations. At the watershed level, the best achievable sediment loading was 1.9 t ha(-1) yr(-1) (89% reduction compared with default scenario), with a BMP combination of crop rotation, FDT, and no-till. The best achievable soluble P loading was 0.5 kg ha(-1) yr(-1) (62% reduction), with a BMP combination of crop rotation and FDT and fertilizer reduction. Targets estimated through nonpoint source water quality modeling can be used to evaluate BMP implementation initiatives and provide milestones for the rehabilitation of streams and rivers in agricultural regions.     

Environmental pesticide distribution in horticultural and floricultural periurban production units

The environmental pesticide distribution on non-target systems (soil, drift and agricultural plastics) during the application step at small periurban production units, was studied in open field and greenhouses, for different crops (tomato, lettuce, broccoli, strawberry and flowers) using different pesticides (endosulfan, procymidone, chlorothalonil, chlorpyrifos and deltamethrin). In all cases, soil was the most exposed non-target system. For greenhouses, a general pesticide distribution was found of approximately 2/3 for crop, 1/4 for soil and 1/20 for plastic, of the total amount applied. In horticultural open fields, although the distribution was very dependent on the crop size and type, soil was also the most exposed non-target subsystem. Pesticide drift seems not to be significant in these production units, whilst pesticide accumulation on agricultural plastics reached up to 45% of the total applied, for polyethylene mulching in strawberry fields.     

Dissolution of beryllium in artificial lung alveolar macrophage phagolysosomal fluid

Dissolution of a lung burden of poorly soluble beryllium particles is hypothesized to be necessary for development of chronic beryllium lung disease (CBD) in humans. As such, particle dissolution rate must be sufficient to activate the lung immune response and dissolution lifetime sufficient to maintain chronic inflammation for months to years to support development of disease. The purpose of this research was to investigate the hypothesis that poorly soluble beryllium compounds release ions via dissolution in lung fluid. Dissolution kinetics of 17 poorly soluble particulate beryllium materials that span extraction through ceramics machining (ores, hydroxide, metal, copper-beryllium [CuBe] fume, oxides) and three CuBe alloy reference materials (chips, solid block) were measured over 31 d using artificial lung alveolar macrophage phagolysosomal fluid (pH 4.5). Differences in beryllium-containing particle physicochemical properties translated into differences in dissolution rates and lifetimes in artificial phagolysosomal fluid. Among all materials, dissolution rate constant values ranged from 10⁻⁵ to 10⁻¹⁰ g cm⁻² d⁻¹ and half-times ranged from tens to thousands of days. The presence of magnesium trisilicate in some beryllium oxide materials may have slowed dissolution rates. Materials associated with elevated prevalence of CBD had faster beryllium dissolution rates [10⁻⁷-10⁻⁸ g cm⁻² d⁻¹] than materials not associated with elevated prevalence (p < 0.05).     

Amending greenroof soil with biochar to affect runoff water quantity and quality

Numbers of greenroofs in urban areas continue to grow internationally; so designing greenroof soil to reduce the amount of nutrients in the stormwater runoff from these roofs is becoming essential. This study evaluated changes in extensive greenroof water discharge quality and quantity after adding biochar, a soil amendment promoted for its ability to retain nutrients in soils and increase soil fertility. Prototype greenroof trays with and without biochar were planted with sedum or ryegrass, with barren soil trays used as controls. The greenroof trays were subjected to two sequential 7.4cm/h rainfall events using a rain simulator. Runoff from the rain events was collected and evaluated. Trays containing 7% biochar showed increased water retention and significant decreases in discharge of total nitrogen, total phosphorus, nitrate, phosphate, and organic carbon. The addition of biochar to greenroof soil improves both runoff water quality and retention.     

Evaluation of the Chemcatcher and DGT passive samplers for monitoring metals with highly fluctuating water concentrations

Passive sampling devices accumulate chemicals continuously from water and can provide time weighted average (TWA) concentrations of pollutants over the exposure period. Hence, they offer a number of advantages over other conventional monitoring techniques such as spot or grab sampling. The diffusive gradient in thin film (DGT) and the Chemcatcher passive samplers can be used to provide TWA concentrations of labile metals, but the approaches to their calibration differ. DGT uses diffusion coefficients of metals in the hydrogel layer, whereas Chemcatcher uses metal specific uptake rates, with both sets of values obtained under controlled laboratory conditions with constant aqueous metal concentrations. However, little is known of how such samplers respond to fluctuating concentrations. We evaluated the responsiveness of these two passive sampling devices to rapidly changing concentrations of Cd, Cu, Ni, Pb and Zn in natural freshwater, over a relatively short deployment time. Maximum metal concentrations in water were varied between 70 and 140 microg L(-1). Experiments were carried out in a tank with a rotating carousel system and filled with Meuse river water, allowing a degree of control over experimental conditions while using natural river water. Fluctuating concentrations were obtained by stepwise addition of standard solutions of the metals. The reliability and accuracy of the TWA concentrations measured by the samplers were assessed by comparison with concentrations of the metals in spot samples of water taken regularly over the deployment period. The spot samples of water were either unfiltered (total), filtered (0.45 microm) or ultrafiltered (5 kDa). Predictive speciation modelling using the visual MINTEQ programme was also undertaken. There was reasonable agreement between the TWA concentrations of Cd and Ni obtained with Chemcatcher and DGT and the total Cd and Ni concentrations measured in repeated unfiltered spot samples. For elements (i.e. Cu, Pb, Zn) that associate to a significant degree with suspended solids, colloids or dissolved organic carbon, or form complexes with large organic ligands, optimum agreement was with the filtered or ultrafiltered fractions and with the predicted inorganic and inorganic-fulvic acid associated fractions. While Chemcatcher-based TWA concentration ranges for Cu and Zn were in best agreement with the total filtered fraction, there was lack of agreement for Pb. The combined use of DGT devices with open pore (OP) and restricted pore (RP) gels allowed the labile fraction of metal associated with large organic ligands or DOC to be differentiated and quantified, since this is available to DGT OP but unable to diffuse into the DGT RP. This evaluation of the two sampling devices clearly demonstrated their ability to react reliably to transient peaks in concentration of metal pollutants in water and indicated where future efforts are needed to improve calibration data. Such samplers may prove valuable in responding to the monitoring requirements of the European Union's Water Framework Directive.     

Inocula from activated sludge for ready biodegradability testing: homogenization by preconditioning

The use of activated sludge as inoculum source in ready biodegradability tests (RBT) suffers from several drawbacks related to the heterogeneity of these communities. In this work, the ability of a 7-day aeration period in a mineral medium to homogenize the characteristics of various activated sludges, as suggested by some RBT, was studied. The biodegradation potential of three activated sludge supernatants obtained from different wastewater treatment plants was assessed in terms of cultivable cell density, dehydrogenasic activity and a profile of hydrolytic enzymes. After the preconditioning, the homogenization of these characteristics in the supernatants was observed, as well as a decrease. When preconditioned inocula were used in acetate RBT, the biodegradation kinetics were homogenized. However, some preconditioned supernatants lost their ability to degrade an easily-assimilable xenobiotic compound (aniline) during the observation period, showing the effect of inoculum preconditioning on the behavior of complex bacterial communities, specialist populations (e.g. aniline degraders) being more sensitive than generalist populations (e.g. acetate degraders). These results show that preconditioning cannot be an optional inoculum pretreatment in RBT, and emphasize the importance of further studies focusing on inoculum homogenization.     

Monitoring conservation effectiveness in a global biodiversity hotspot: the contribution of land cover change assessment

Tropical forests, which play critical roles in global biogeochemical cycles, radiation budgets and biodiversity, have undergone rapid changes in land cover in the last few decades. This study examines the complex process of land cover change in the biodiversity hotspot of Western Ghats, India, specifically investigating the effects of conservation measures within the Indira Gandhi Wildlife Sanctuary. Current vegetation patterns were mapped using an IRS P6 LISS III image and this was used together with Landsat MSS data from 1973 to map land cover transitions. Two major and divergent trends were observed. A dominant degradational trend can be attributed to agricultural expansion and infrastructure development while a successional trend, resulting from protection of the area, showed the resilience of the system after prolonged disturbances. The sanctuary appears susceptible to continuing disturbances under the current management regime but at lower rates than in surrounding unprotected areas. The study demonstrates that remotely sensed land cover assessments can have important contributions to monitoring land management strategies, understanding processes underpinning land use changes and helping to inform future conservation strategies.     

A long-term study comparing membrane filtration with Colilert defined substrates in detecting fecal coliforms and Escherichia coli in natural waters

Assessment methods for determining the presence and number of fecal bacteria and Escherichia coli (E. coli) in waters, foodstuffs, sewage effluent, and soils have evolved from multiple tube fermentations (MTF's) to membrane filtrations (MF's) to, most recently, defined substrate technologies (DST's). Mounting evidence indicates Colilert DST (IDEXX, Westbrook, ME) to be a versatile assessment technique for detecting and enumerating E. coli over a range of applications. This study compared the performance of Colilert DST with a confirmed standard MF technique using m-FC broth (Millipore, Bedford, MA) in assessing E. coli in ten different environmental water samples obtained monthly over a 3-year period from the upper Appomattox River, VA. For the duration of the study, E. coli counts measured by Colilert DST were positively correlated (Pearson's correlation coefficient=0.956; slope=0.979; p<0.0001) with E. coli counts measured by confirmed MF procedures. The results of a two-factor ANOVA revealed that Colilert DST counts compared equally to confirmed MF counts by year (p=0.974), by stream sampled (p=1.0), and by season (p=0.696). E. coli counts were significantly lower during cold season months (Dec/Jan/Feb) than during warm season months (Jun/Jul/Aug) for each year contributing to marked variation in sample quality. Counts obtained by Colilert DST compared equally to those obtained by MF across all samples and dates for the three years. Colilert DST presents a laboratory protocol that is simpler to manage, quicker to process, and easier to quantify results than MF. These factors, plus the enhanced precision and versatility of Colilert DST over the span of this three-year study attests to its suitability for testing ambient surface waters.