Impacts of natural weathering on the transformation/neoformation processes in landfilled MSWI bottom ash: a geoenvironmental perspective

Natural weathering processes are significant mechanisms that noticeably affect the fundamental nature of incineration ash residues. To provide a greater understanding of these processes, a MSWI (mono)landfill site in the north east of the US was selected as the target for systematic investigation of the natural weathering of bottom ash residues. Samples of various ages were collected from locations A (1 yr), B (10 yrs), C (13-14 yrs) and D (20 yrs) of the landfill in 2009. We investigated the phase transformation of the collected bottom ash particles, neoformation processes as well as the behavior and distribution of certain heavy metals (Cu, Pb, Zn, Ni, and Cr) in the neoformed phases using optical microscopy, SEM-EDX, and bulk examinations. Key findings: at the preliminary stage, the waste metallic particles (Al, Fe, and Cu) and unstable minerals such as lime, portlandite, ettringite and hydrocalumite convert to oxide and hydroxide (hydrate) phases, calcite, alumina gel and gypsum. At the intermediate stage, the decomposition of melt products including magnetite spinels and metallic inclusions is triggered due to the partial dissolution of the melt glass. At the longer time horizon it is possible to track the breakdown of the glass phase, the extensive formation of calcite and anhydrite, Al-hydrates and more stable Fe-hydrates all through the older ash deposits. Among the dominant secondary phases, we propose the following order based on their direct metal uptake capacity: Fe-hydrates>Al-hydrates>calcite. Calcite was found to be the least effective phase for the direct sorption of heavy metals. Based on overall findings, a model is proposed that demonstrates the general trend of ash weathering in the landfill.     

RUNOFF AND EROSION RESPONSE OF SIMULATED WASTE BURIAL COVERS IN A SEMI-ARID ENVIRONMENT1

ABSTRACT: Control of runoff (reducing infiltration) and erosion at shallow land burials is necessary in order to assure environmentally safe disposal of low-level radioactive-waste and other waste products. This study evaluated the runoff and erosion response of two perennial grass species on simulated waste burial covers at Idaho National Engineering and Environmental Laboratory (INEEL). Rainfall simulations were applied to three plots covered by crested wheatgrass [Agropyron desertorum(Fischer ex Link) Shultes], three plots covered by streambank wheatgrass [Elymus lanceolatus(Scribner and Smith) Gould spp. lanceolaus], and one bare plot. Average total runoff for rainfall simulations in 1987, 1989, and 1990 was 42 percent greater on streambank wheatgrass plots than on crested wheatgrass plots. Average total soil loss for rainfall simulations in 1987 and 1990 was 105 percent greater on streambank wheatgrass plots than on crested wheatgrass plots. Total runoff and soil loss from natural rainfall and snowmelt events during 1987 were 25 and 105 percent greater, respectively, on streambank wheatgrass plots than on crested wheatgrass plots. Thus, crested wheatgrass appears to be better suited in revegetation of waste burial covers at INEEL than streambank wheatgrass due to its much lower erosion rate and only slightly higher infiltration rate (lower runoff rate).     

Why Economics Matters for Endangered Species Protection

Abstract: We offer three reasons why economics matters more to species protection than many people think and what this implies for the ongoing debate over the reauthorization of the Endangered Species Act of 1973. Economics matters because (1) human behavior generally, and economic parameters in particular, help determine the degree of risk to a species; (2) in a world of scarce resources, the opportunity cost of species protection—the costs of reduced resources for other worthwhile causes—must be taken into account in decision making; and (3) economic incentives are critical in shaping human behavior, and consequently the recovery of species. Endangered species protection that explicitly addresses these basic principles can avoid wasting valuable resources that yield no gain in species protection.     

Tactile learning in resin foraging honeybees

Honeybees harvest and use plant resins in a mixture called propolis to seal cracks and smooth surfaces in the nest architecture. Resins in the nest may be important in maintaining a healthy colony due to their antimicrobial properties. This study had two main objectives: (1) Provide initial insight on the learning capabilities of resin foraging honeybees; (2) analyze the sensitivity of resin foraging honeybees to tactile stimuli to elucidate its possible role as a mechanism behind resin foraging. The first objective provides insight into the phenotype of these bees as compared to other forager types, while the second creates a starting point for further work on behavioral mechanisms of resin foraging. Using tactile proboscis extension response conditioning, we found that resin foragers learned to associate two different tactile stimuli, the presence of a gap between two plates and a rough sandpaper surface, with a sucrose reward significantly better than pollen foragers. The results of differential tactile conditioning exhibited no significant difference in the ability of resin foragers to discriminate between smooth and rough surfaces as compared to pollen foragers. We also determined that the sucrose response thresholds (SRTs) of returning resin foragers were lower compared to returning pollen foragers, but both resin foragers and pollen foragers learned a floral odor equally well. This is the first study to examine SRTs and conditioning to tactile and olfactory stimuli with resin foraging honeybees. The results provide new information and identify areas for future research on resin collectors, an understudied foraging phenotype.     

Mechanical Properties of Microcrystalline Cellulose (MCC) Filled Engineering Thermoplastic Composites

In this study, engineering thermoplastic composites were prepared from microcrystalline cellulose (MCC)-filled nylon 6. MCC were added to nylon 6 using melt mixing to produce compounded pellets. The MCC-filled nylon 6 composites with varying concentrations of MCC (from 2.5 to 30 wt%) were prepared by injection molding. The tensile and flexural properties of the nylon 6 composites were increased significantly with the addition of MCC. The maximum strength and modulus of elasticity for the nylon 6 composites were achieved at a MCC weight fraction of 20 %. The Izod impact strength of composites decreased with the incorporation of MCC without any surface treatments and coupling agent. This observation is quite expected for filled polymer systems and has been commonly observed. There was a strong correlation between density and tensile (r = 0.94) and flexural modulus of elasticity (r = 0.9). MCC filled composites manufactured by injection method had highly uniform density distribution through their thickness. The higher mechanical results with lower density demonstrate that MCC can be used as a sufficient reinforcing material for low cost, eco-friendly composites in the automotive industry especially for under-the-hood applications (engine covers, intake manifolds and radiator end tanks) as well as in other applications such as the building and construction industries, packaging, consumer products etc.     

澳大利亚水资源分配的法律原则

水资源短缺是困扰当今世界各国政府的主要问题之一.澳大利亚政府在水资源的分配方面进行了深入有益的探索和改革,取得了不少成功的经验.本文着重介绍了澳大利亚水资源分配的法律原则,希望对水资源短缺的国家和地区在立法上有一定的借鉴意义.     

Trisomy 20 mosaicism in a foetus

A widespread distrust in the significance of the observation of trisomy 20 mosaicism in amniotic fluid cultures has led to an increasing belief that this particular type of aneuploidy is of extra foetal origin and is clinically incosequential. The report presents an example of amnoitic fluid cell mosaicism for trisomy 20 which was ultimately confirmed in the foetus, and proposes that, in spite of the absence of obvious congenital malformation from the foetus, trisomy 20 mosaicism in amnoitic fluid cultures should be regarded with the same deference as mosaicism for any other autosome of unknown effect.     

Effects of Disturbance on Nitrogen Export from Forested Lands of the Chesapeake Bay Watershed

The objective of this research project is to develop, test, validate, and demonstrate an analytical framework for assessing regional-scale forest disturbance in the mid-Atlantic region by linking forest disturbance and forest nitrogen export to surface waters at multiple spatial scales. It is hypothesized that excessive nitrogen (N) leakage (export) from forested watersheds is a potentially useful, integrative "indicator" of a negative change in forest function which occurs in synchrony with changes in forest structure and species composition. Our research focuses mainly on forest disturbance associated with recent defoliations by the gypsy moth larva (Lymantria dispar) at spatial scales ranging from small watersheds to the entire Chesapeake Bay watershed. An approach for assessing the magnitude of forest disturbance and its impact on surface water quality will be based on an empirical model relating forest N leakage and gypsy moth defoliation that will be calibrated using data from 25 intensively-monitored forested watersheds in the region and tested using data from more than 60 other forested watersheds in Virginia. Ultimately, the model will be extended to the region using spatially-extensive data describing: 1) the spatial distribution of dominant forest types in the mid-Atlantic region based on both remote sensing imagery and plot-scale vegetation data; 2) the spatial pattern of gypsy moth defoliation of forested areas from aerial mapping; and 3) measurements of dissolved N concentrations in streams from synoptic water quality surveys.     

Experimental analysis of worker division of labor in bumblebee nest thermoregulation (<Emphasis Type="Italic">Bombus huntii</Emphasis>, Hymenoptera: Apidae)

Bumblebee colonies experience daily and seasonal fluctuations in ambient temperature, but proper brood development requires a stable nest temperature. This study examined how adaptive colony responses to changing ambient temperature are achieved through the in-nest workers’ behavioral plasticity. We studied three Bombus huntii colonies in the laboratory. In the first experiment, we manipulated ambient temperature and recorded brood cell incubation and wing fanning by individually marked, known-age bees. The colonies maintained their nests closer to appropriate brood development temperatures (28 to 32°C) when exposed to a range of ambient temperatures from 10.3 to 38.6°C. Incubation activity was greater in cooler treatment conditions, whereas in the highest temperature treatment, some bees fanned and others moved off the brood. As the ambient temperature dropped, workers increased the duration of their incubating bouts, but, except at the highest temperature, the number of workers that incubated did not differ significantly among treatments. A subset of the bees incubated significantly more than their nest mates, some of which never incubated. Worker body size, but not age, was a good predictor of incubation rates, and smaller bees incubated at higher rates. In the second experiment, we removed the most actively incubating workers. Immediately after removals, the total colony incubation effort was lower than pre-removal levels, but incubation effort rebounded toward pre-removal levels after 24 h. The increased thermoregulatory demand after removals was met primarily by bees increasing their rates of incubation rather than by bees switching from a different task to incubation. We conclude that some B. huntii workers specialize on nest thermoregulation, and that changes in work rates are more important than task switching in meeting thermal challenges.