Validation of a passive atmospheric deposition sampler for polybrominated diphenyl ethers

An atmospheric deposition sampler was validated with respect to polybrominated diphenyl ethers (PBDEs), a compound group that is widely used as flame retardants in many types of consumer products. The deposition sampler consists of an adsorption cartridge that is connected to a glass funnel. Extraction tests with spiked cartridges using soxhlet extraction with acetone revealed recoveries of >80% for all of the investigated PBDEs. Once adsorbed, PBDEs are stable, as proven by extractions of spiked cartridges that were stored outdoors and collected after different periods of time, up to 84 days. High recoveries indicate that degradation of adsorbed PBDEs does not play a role under realistic field conditions. Bulk deposition rates of PBDEs were determined in a field test with 3 replicates, and a possible breakthrough of target compounds was assessed in the field using a second adsorption cartridge in series. No breakthrough of target compounds could be observed within a sampling period of 61 days, and a bulk deposition rate of approximately 1 ng m(-2) day(-1) for the sum of all analysed PBDEs was measured. The highest deposition rates were measured for octa-brominated congeners, followed by BDEs 99, 183, 153, and 47. Overall, the sampler was successfully validated regarding the atmospheric deposition of PBDEs.     

采用大体积进样提高水样中农药检测的灵敏度

正质谱技术的进步,使得分析方法的检测限不断降低,推动了许多有关环境和食品中痕量污染物的研究.通常情况下,亚ppb级的污染物水平分析,首选串联四极杆质谱.使用WatersXevoG2-S QTof可轻松实现对10-9级别的已知和未知化合物的筛查,如果增大样品进样体积,还可进一步提高灵敏度.而仅依靠MS/MS,是无法得到未知物或大量污染物的分析结果的.结合Xevo G2-S QTof的高精确质量数准确度(3×10-6)在低浓度水平下进行筛查实验,对许多环境分析     

Ecology of loggerhead marine turtles Caretta caretta in a neritic foraging habitat: movements, sex ratios and growth rates

Much is still to be learned about the spatial ecology of foraging marine turtles, especially for juveniles and adult males which have received comparatively little attention. Additionally, there is a paucity of ecological information on growth rates, size and age at maturity, and sex ratios at different life stages; data vital for successful population modelling. Here, we present results of a long-term (2002–2011) study on the movements, residency, growth and sex ratio of loggerhead turtles (Caretta caretta) in Amvrakikos Gulf (39°0′N 21°0′E), Greece, using satellite telemetry (N = 8) and ongoing capture–mark–recapture (CMR; N = 300 individuals). Individuals encountered at sea ranged from large juvenile to adult (46.2–91.5 cm straight carapace length) and demonstrated growth rates within published norms (<2.7 cm yr^?1) that slowed with increasing body size. We revealed that an unexpectedly high proportion of animals were male (>44 % of captures above 65 cm straight carapace length), compared to region-wide female-biased hatchling production, indicating sex-biased survival or possible behavioural drivers for likelihood of capture in the region. Satellite tracking confirmed that some turtles establish discrete, protracted periods of residency spanning more than 1 year, whilst others migrated away from the site. These findings are underlined by CMR results with individual capture histories spanning up to 7 years, and only 18 % of individuals being recaptured.     

Use of computer models of flood inundation to facilitate communication in flood risk management

It is now widely recognised that good communication between multi-disciplinary stakeholders is central to effective flood risk management. Recent developments in Geographical Information Systems, increased availability of accurate digital terrain models from remotely sensed data sources and improved graphical computer interfaces have made the outputs from computer models of flood inundation easily accessible to the stakeholder community. As a consequence, predictions from such models are now being used routinely as a means of communication between engineers and other stakeholders in flood risk management. This paper provides a review of the modelling methods most appropriate for flood risk communication. These are one-dimensional models which are suitable for simulating flood risk at a catchment or sub-catchment scale and appropriate for communicating the impact of strategic flood management decisions and two-dimensional models which can be applied across a range of scales but, are now being regularly applied at the relatively small scale, less than 10 km², where they have the potential to inform and communicate disaster management decisions. The role of such models in communicating between modellers and non-modellers by providing a means for immediate visualisation of “the future” is discussed and illustrated by application to two case studies.     

Effects of simulated deposition of dredged material on structure of nematode assemblages – the role of contamination

 Certain criteria must be satisfied before a licence for the deposition of dredged material at sea in UK waters is issued. These relate to the chemical quality of the material, the quantity to be disposed of, its nature and origin, and its predicted impacts at the disposal site. Although chemical analyses of dredgings provide an indication of the relative degrees of contamination, they do not provide a measure of any resultant biological effects. A laboratory experiment was therefore designed to investigate the effects of the degree of contamination and the role of burial associated with the deposition of dredged material on the meiofauna. Estuarine nematode assemblages were exposed to the simulated deposition of uncontaminated, oxic intertidal mud and anoxic sediments from the Mersey and the Tees estuaries, both of which were contaminated with heavy metals. The sediments, which differed little in terms of grain size, were deposited in two different frequencies. Nematodes showed a clear species-specific response to the experimental treatments, depending on the frequency of deposition and the chemical quality of the deposited material (e.g. metal and oxygen concentrations). The response of nematode assemblages was mainly determined by the deposition frequency rather than the type of sediment or the degree of contamination. The deposition of sediment in one large dose at the beginning of the experiment caused more severe changes in assemblage structure than the same quantity deposited in several smaller doses. Although lower than in uncontaminated mud, relatively high migration and survival rates in the contaminated high-frequency treatments were observed. This may have been due to reduced bioavailability of metals and the tolerance of estuarine nematodes to both metal contamination and the deposition of small sediment volumes at regular intervals. The observed trends demonstrate the potential of small-scale laboratory experiments for testing the quality of contaminated dredged material at the licensing stage, i.e. prior to the issue of a disposal licence. Received: 11 February 2000 / Accepted: 26 June 2000     

Fate and Transport Modeling of Potential Pathogens: The Contribution From Sediments1

Abstract: Escherichia coli was used as a bacterial tracer for the development, calibration, and validation of a watershed scale fate and transport model to be extended to a suite of reference pathogens (Cryptosporidium, Giardia, Campylobacter, E. coli O157:H7). E. coli densities in water and sediments from the Blackstone River Watershed, Massachusetts, were measured at three sites for a total of five wet weather events and three dry weather events covering three seasons. The confirmed E. coli strains were identified by ribotyping for tracking the sources of E. coli and for determining the association of downstream E. coli isolates with isolates from upstream sediments. A large number of downstream samples were associated with upstream sediment sources of E. coli. E. coli densities ranged from 71 to 6,401 MPN/100 ml in water samples and from 2 to 335 MPN/g in sediments. Pearson correlation analysis revealed significant correlations between E. coli and total coliforms in water (r = 0.777, p < 0.01) and sediments (r = 0.728, p < 0.01). In addition, E. coli concentrations in water were weakly correlated with sediment particle size and sediment concentrations (r = 0.298, p < 0.01). A hydrologic model, WATFLOOD/SPL9, was used to predict the temporal and spatial variation of E. coli in the Blackstone River. The rapid rise of stream E. coli densities was more accurately predicted by the model with the inclusion of sediment resuspension, thus demonstrating the importance of the process.     

Modelling of post-fragmentation waste stream processing within UK shredder facilities

With the introduction of producer responsibility legislation within the UK (i.e., waste electrical and electronic equipment directive and end-of-life vehicles directive), specific recycling and recovery targets have been imposed to improve the sustainability of end-of-life products. With the introduction of these targets, and the increased investment in post-fragmentation facilities, automated material separation technologies are playing an integral role within the UK's end-of-life waste management strategy. Post-fragmentation facilities utilise a range of purification technologies that target certain material attributes (e.g., density, magnetism, volume) to isolate materials from the shredded waste stream. High ferrous prices have historically meant that UK facilities have been primarily interested in recovering iron and steel, establishing processing routes that are very effective at removing these material types, but as a consequence are extremely rigid and inflexible. With the proliferation of more exotic materials within end-of-life products, combined with more stringent recycling targets, there is therefore a need to optimise the current waste reclamation processes to better realise effort-to-value returns. This paper provides a background as to the current post-fragmentation processing adopted within the UK, and describes the development of a post-fragmentation modelling approach, capable of simulating the value-added processing that a piece of automated separation equipment can have on a fragmented waste stream. These include the modelling of the inefficiencies of the technology, the effects of material entanglement on separation, determination of typical material sizing and an appreciation for compositional value. The implementation of this approach within a software decision-support system is described, before the limitations, calibration and further validation of the approach are discussed.     

In situ chemical oxidation of residual LNAPL and dissolved‐phase fuel hydrocarbons and chlorinated alkenes in groundwater using activated persulfate

A treatablity study (TS) was conducted to evaluate the efficacy of in situ chemical oxidation (ISCO) using activated persulfate, alone and in combination with air sparging (AS), for treating a source area contaminated with residual light nonaqueous‐phase liquid (LNAPL), dissolved‐phase fuel hydrocarbons (HCs), and dissolved‐phase chlorinated alkenes at Edwards Air Force Base (AFB), California. The TS was implemented in two phases. Phase I included injecting a solution of sodium persulfate and sodium hydroxide (NaOH) into groundwater via an existing well where residual LNAPL and dissolved‐phase contaminants were present. Because the results of Phase I indicated a limited distribution of the activated persulfate, Phase II was performed to assess whether AS could enhance the distribution of the sodium persulfate. Each phase was followed by groundwater monitoring and sampling at the injection well and at three monitoring wells, located 20 to 44 feet from the injection well. Results from Phases I and II of the TS indicated that (1) alkaline‐activated persulfate was effective in promoting the dissolution of LNAPL and the degradation of dissolved‐phase contaminants, but only at the injection well; (2) the addition of AS was effective in enhancing the radius of persulfate distribution from less than 20 feet to greater than 44 feet, and (3) persulfate alone (i.e., not in an activated state) was effective in reducing the concentrations of dissolved‐phase fuel HC and chlorinated alkenes. © 2009 Wiley Periodicals, Inc.     

Distributing power? Community energy projects' experiences of planning,policy and incumbents in the devolved nations of Scotland and Wales

Community-owned energy projects are viewed as compelling contributors towards renewable energy targets. They contribute to curtailing the use of carbon intensive energy sources, consequently aiding mitigation of climate change, and can contribute towards a sustainable, localised economy. The success and expansion of the sector varies. However, there is a lack of knowledge regarding the development of the sector between sub-state nations. This qualitative, comparative study looks at the sector in the sub-state, devolved nations of Wales and Scotland within the UK. Through a series of in-depth interviews with community energy practitioners in four case study sites in Scotland and Wales, this study shows how policy and governance practices can influence the sector and those working at grassroots level. The study shows a disparity in confidence and outlook for the sector, based on the perceived (in)effective governance in each devolved nation.     

Effect of soil ageing on in vivo arsenic bioavailability in two dissimilar soils

Arsenic (As) bioavailability in spiked soils aged for up to 12 months was assessed using in vitro and in vivo methodologies. Ageing (natural attenuation) of spiked soils resulted in a decline in in vivo As bioavailability (swine assay) of over 75% in soil A (Red Ferrosol) but had no significant effect on in vivo As bioavailability even after 12 months of ageing in soil B (Brown Chromosol). Sequential fractionation, however, indicated that there was repartitioning of As within the soil fractions extracted during the time course investigated. In soil A, the As fraction associated with the more weakly bound soil fractions decreased while the residual fraction increased from 12% to 35%. In contrast, little repartitioning of As was observed in soil B indicating that natural attenuation may be only applicable for As in soils containing specific mineralogical properties.