The ozone productivity of n-propyl bromide: Part 2--An exception to the Maximum Incremental Reactivity Scale

In an earlier paper the ozone-forming potential of n-propyl bromide (NPB) was studied with a new methodology designed to address issues associated with a marginal smog-forming compound. However, the U.S. Environmental Protection Agency (EPA) subsequently revised its policy and now recommends using the Maximum Incremental Reactivity (MIR) scale to rank the ozone-forming potential of all volatile organic compounds (VOCs), including those of marginal ozone productivity. Nevertheless, EPA contemplated exceptions to the box-model-derived MIR scale by allowing use of photochemical grid-model simulations for case specific reactivity assessments. The California Air Resources Board (CARB) also uses the MIR scale and CARB has a Reactivity Scientific Advisory Committee that can consider exceptions to the MIR scale. In this study, grid-model simulations that were recommended by EPA are used to evaluate the incremental ozone impacts of NPB using an update to the chemical mechanism developed in an earlier paper. New methods of analysis of the grid-model output are further developed here to quantify the relative reactivities between NPB and ethane over a wide range of conditions. The new grid-model-based analyses show that NPB is significantly different and generally less in ozone-forming potential (i.e., reactivity) than predicted by the box-model-based MIR scale relative to ethane, EPA's "bright-line" test for non-VOC status. Although NPB has low reactivity compared to typical VOCs on any scale, the new grid-model analyses developed here show that NPB is far less reactive (and even has negative reactivity) compared to the reactivity predicted by the MIR scale.     

Screening the phytoremediation potential of desert broom (Baccharis sarothroides Gray) growing on mine tailings in Arizona, USA

The metal concentrations in a copper mine tailings and desert broom (Baccharis sarothroides Gray) plants were investigated. The metal concentrations in plants, soil cover, and tailings were determined using ICP-OES. The concentration of copper, lead, molybdenum, chromium, zinc, arsenic, nickel, and cobalt in tailings was 526.4, 207.4, 89.1, 84.5, 51.7, 49.6, 39.7, and 35.6mgkg(-1), respectively. The concentration of all elements in soil cover was 10-15% higher than that of the tailings, except for molybdenum. The concentration of copper, lead, molybdenum, chromium, zinc, arsenic, nickel, and cobalt in roots was 818.3, 151.9, 73.9, 57.1, 40.1, 44.6, 96.8, and 26.7mgkg(-1) and 1214.1, 107.3, 105.8, 105.5, 55.2, 36.9, 30.9, and 10.9mgkg(-1) for shoots, respectively. Considering the translocation factor, enrichment coefficient, and the accumulation factor, desert broom could be a potential hyperaccumulator of Cu, Pb, Cr, Zn, As, and Ni.     

Assessing the chemical and biological accessibility of the herbicide isoproturon in soil amended with biochar

Decamethylcyclopentasiloxane (D5) is a cyclic volatile methyl siloxane (cVMS) commonly found in commercially available products. D5 is expected to enter the terrestrial environment through the deposit of biosolids from sewage treatment plants onto agricultural fields for nutrient enrichment. Little to no information currently exists as to the risks of D5 to the terrestrial environment. In order to evaluate the potential risk to terrestrial organisms, the toxicity of a D5 contaminated biosolid in an agricultural soil was assessed with a battery of standardized soil toxicity tests.D5 was spiked into a surrogate biosolid and then mixed with a sandy loam soil to create test concentrations ranging from 0 to 4074 mg kg⁻¹. Plant (Hordeum vulgare (barley) and Trifolium pratense (red clover)) and soil invertebrates (Eisenia andrei (earthworm) and Folsomia candida (springtail)) toxicity tests were completed to assess for lethal and sub-lethal effects. Plant testing evaluated the effects on seedling emergence, shoot and root length, and shoot and root dry mass. Invertebrate test endpoints included adult lethality, juvenile production, and individual juvenile dry mass (earthworms only). Soil samples were collected over time to confirm test concentrations and evaluate the loss of chemical over the duration of a test. The toxicity of the D5 was species and endpoint dependent, such that no significant adverse effects were observed for T. pratense or E. andrei test endpoints, however, toxicity was observed for H. vulgare plant growth and F. candida survival and reproduction. Chemical losses of up to 50% were observed throughout the tests, most significantly at high concentrations.     

Accumulation of metals,trace elements and semi-volatile organic compounds on exterior window surfaces in Baltimore

Organic films have been found to develop on window surfaces [Diamond et al., Environmental Science and Technology 34 (2000a) 2900]. The film contains organic compounds that are in dynamic equilibrium with the gas-phase in air, and organic and inorganic compounds and elements associated with deposited air particles. In this study, the exterior surfaces of windows were sampled in downtown and suburban Baltimore, Maryland. Higher concentrations of PCBs, PAH, metals and trace elements were found at downtown than a suburban site. PCBs in the films at downtown sites were dominated by penta and hexa homologue groups and PAH signatures resembled that of vehicle emissions. Twenty-six metals and trace elements were separated into two groups according to their enrichment factors (EF). Ag, Hg, Se, Sb and Zn had EF > 100, suggesting anthropogenic sources of these metals in the films; whereas Fe, Ca, Co, Cr and others had EF <10, suggesting a crustal origin. An unusual profile dominated by deca- and nona- PCBs and relatively higher concentrations of Ag, Hg and Zn may be attributable to emissions from a medical waste incinerator. Dry deposition fluxes of selected metals on windows were 1.4-94 times higher on windows with than without films, indicating that the film increases the dry deposition of particles and their associated chemicals. This implies that film development, which is associated with elevated VOC and SOC emissions to urban air, will increase film development that will, in turn, increase the accumulation of other atmospherically deposited constituents such as metals.     

Determining the effectiveness of conventional and alternative coagulants through effective characterization schemes

Polymeric forms of metal coagulants in water treatment have become increasingly used due to their wider availability and reduction in cost. These specialized coagulant forms and products are claimed by manufacturers to be superior to conventional coagulants in particulate and/or organic removal with inherent advantages of lower alkalinity consumption and lesser sludge production. However, due to their proprietary nature, little is known about their chemical composition. To determine and understand the effectiveness of these alternative coagulants, a comprehensive study was undertaken to characterize metal coagulants, and to comparatively evaluate them on a well-characterized source water. The objective of this study was to provide a scheme for utilities that could be employed as a screening process and a method of selecting an appropriate coagulant based on raw water characteristics and insight into the coagulatability of the source water. Characterizations of coagulants included: (i) active metal content, (ii) anion content, (iii) acidity, (iv) alkalinity consumption, (v) charge reversal by colloidal titration, and (vi) molecular weight determination. A total of five poly-aluminum chlorides (PACl), along with a conventional coagulant (aluminum sulfate or alum) were evaluated. Results show that through the characterization scheme, an effective coagulant (conventional versus alternative) and coagulant type (among various PACl) can be chosen before undertaking time-consuming bench or pilot-scale evaluation.     

The national GIS demonstrator of common lands for England and Wales

This paper describes the construction of a Geographical Information System (GIS) for common land tracts in England and Wales. In particular we highlight the problems inherent in combining data sets which have not been designed with GIS approaches in mind. The paper documents, through this case study, a number of key principles for researchers faced with developing databases of this nature and the limitations of the resulting database in the light of such concerns. In doing so, we draw attention to the types of techniques that can be developed to ensure users do not use the data in unwarranted situations and so guard against potential misuse. Such statements, it is concluded, are essential components in studies where data from several different sources are combined in a GIS environment to address rural planning issues.     

Enhanced land treatment of petroleum-contaminated soils using solid peroxygen materials

A pilot field study evaluated whether adding solid peroxygen materials during land treatment could cost effectively accelerate cleanup at a site contaminated with petroleum-related compounds. Five test cells were constructed containing approximately five cubic yards of soil contaminated with 300–400 mg/kg of total petroleum hydrocarbons (TPH). Three cells received treatment with solid peroxygen materials (either MgO₂ or CaO₂), while the other two cells served as controls (no peroxygen amendment). Adding solid peroxygen compounds effectively reduced the hydrocarbon contamination in the soils and decreased the treatment time. During this time, the concentration of TPH in soil in the three treatment cells decreased. In contrast, there was little loss of TPH from the two control cells simulating traditional land treatment. Adding the solid peroxygen materials reduced the total site remediation time, thereby reducing the overall costs.     

Bioventing pilot test results at the low point drain area at Offutt AFB,Nebraska

Bioventing is a relatively new technology that uses forced air movement to deliver supplemental oxygen to contaminated soils to stimulate the biodegradation of contaminants by indigenous microorganisms. A bioventing pilot test was initiated at Offutt Air Force Base, Nebraska, in August 1992, at a site contaminated with jet fuel. Air was injected into the subsurface over a period of 15 months, and tests were conducted at 6 months, and again at 15 months, to determine the effectiveness of the system. This article describes the bioventing process and its application at this test site. The results of the pilot test are discussed to illustrate the extent of the remediation accomplished through bioventing.