Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale

Production of natural gas from shale formations is bringing drilling and production operations to regions of the United States that have seen little or no similar activity in the past, which has generated considerable interest in potential environmental impacts. This study focused on the Barnett Shale Fort Worth Basin in Texas, which saw the number of gas-producing wells grow from 726 in 2001 to 15,870 in 2011. This study aimed to measure fence line concentrations of methane and hydrogen sulfide at natural gas production sites (wells, liquid storage tanks, and associated equipment) in the four core counties of the Barnett Shale (Denton, Johnson, Tarrant, and Wise). A mobile measurement survey was conducted in the vicinity of 4788 wells near 401 lease sites, representing 35% of gas production volume, 31% of wells, and 38% of condensate production volume in the four-county core area. Methane and hydrogen sulfide concentrations were measured using a Picarro G2204 cavity ring-down spectrometer (CRDS). Since the research team did not have access to lease site interiors, measurements were made by driving on roads on the exterior of the lease sites. Over 150 hr of data were collected from March to July 2012. During two sets of drive-by measurements, it was found that 66 sites (16.5%) had methane concentrations >3 parts per million (ppm) just beyond the fence line. Thirty-two lease sites (8.0%) had hydrogen sulfide concentrations >4.7 parts per billion (ppb) (odor recognition threshold) just beyond the fence line. Measured concentrations generally did not correlate well with site characteristics (natural gas production volume, number of wells, or condensate production). t tests showed that for two counties, methane concentrations for dry sites were higher than those for wet sites. Follow-up study is recommended to provide more information at sites identified with high levels of methane and hydrogen sulfide.

Implications:Information regarding air emissions from shale gas production is important given the recent increase in number of wells in various regions in the United States. Methane, the primary natural gas constituent, is a greenhouse gas; hydrogen sulfide, which can be present in gas condensate, is an odor-causing compound. This study surveyed wells representing one-third of the natural gas production volume in the Texas Barnett Shale and identified the percent of sites that warrant further study due to their fence line methane and hydrogen sulfide concentrations.     

Long-term effect of rice-based farming systems on soil health

Integrated rice–fish culture, an age-old farming system, is a technology which could produce rice and fish sustainably at a time by optimizing scarce resource use through complementary use of land and water. An understanding of microbial processes is important for the management of farming systems as soil microbes are the living part of soil organic matter and play critical roles in soil C and N cycling and ecosystem functioning of farming system. Rice-based integrated farming system model for small and marginal farmers was established in 2001 at Central Rice Research Institute, Cuttack, Odisha. The different enterprises of farming system were rice–fish, fish–fingerlings, fruits, vegetables, rice–fish refuge, and agroforestry. This study was conducted with the objective to assess the soil physicochemical properties, microbial population, carbon and nitrogen fractions, soil enzymatic activity, and productivity of different enterprises. The effect of enterprises induced significant changes in the chemical composition and organic matter which in turn influenced the activities of enzymes (urease, acid, and alkaline phosphatase) involved in the C, N, and P cycles. The different enterprises of long-term rice-based farming system caused significant variations in nutrient content of soil, which was higher in rice–fish refuge followed by rice–fish enterprise. Highest microbial populations and enzymatic properties were recorded in rice–fish refuge system because of waterlogging and reduced condition prolonged in this system leading to less decomposition of organic matter. The maximum alkaline phosphatase, urease, and FDA were observed in rice–fish enterprise. However, highest acid phosphatase and dehydrogenase activity were obtained in vegetable enterprise and fish–fingerlings enterprise, respectively.     

Fire Management,Managed Relocation,and Land Conservation Options for Long‐Lived Obligate Seeding Plants under Global Changes in Climate,Urbanization, and Fire Regime

Most species face multiple anthropogenic disruptions. Few studies have quantified the cumulative influence of multiple threats on species of conservation concern, and far fewer have quantified the potential relative value of multiple conservation interventions in light of these threats. We linked spatial distribution and population viability models to explore conservation interventions under projected climate change, urbanization, and changes in fire regime on a long‐lived obligate seeding plant species sensitive to high fire frequencies, a dominant plant functional type in many fire‐prone ecosystems, including the biodiversity hotspots of Mediterranean‐type ecosystems. First, we investigated the relative risk of population decline for plant populations in landscapes with and without land protection under an existing habitat conservation plan. Second, we modeled the effectiveness of relocating both seedlings and seeds from a large patch with predicted declines in habitat area to 2 unoccupied recipient patches with increasing habitat area under 2 projected climate change scenarios. Finally, we modeled 8 fire return intervals (FRIs) approximating the outcomes of different management strategies that effectively control fire frequency. Invariably, long‐lived obligate seeding populations remained viable only when FRIs were maintained at or above a minimum level. Land conservation and seedling relocation efforts lessened the impact of climate change and land‐use change on obligate seeding populations to differing degrees depending on the climate change scenario, but neither of these efforts was as generally effective as frequent translocation of seeds. While none of the modeled strategies fully compensated for the effects of land‐use and climate change, an integrative approach managing multiple threats may diminish population declines for species in complex landscapes. Conservation plans designed to mitigate the impacts of a single threat are likely to fail if additional threats are ignored. Manejo de Incendios, Reubicación Administrada y Opciones de Conservación de Suelo para Plantas de Vida Larga con Sembrado Obligado bajo los Cambios Globales en el Clima, la Urbanización y el Régimen de Incendios     

Environmental assessment of laser assisted manufacturing: case studies on laser shock peening and laser assisted turning

Laser assisted manufacturing processes, when compared with traditional manufacturing processes, have the potential to reduce cost, increase surface resistance to wear and fatigue, extend part/tool life, and expand the range of manufacturable materials. These processes have found niche applications in automotive, aerospace, and defense industries. However, very limited research has been conducted to evaluate and compare the environmental performance of laser assisted processes with traditional methods. This paper conducts case studies on two representative laser based processes, i.e. laser shock peening of 7075-T7351 Aluminum and laser assisted turning of compacted graphite iron. Life cycle assessment is used to benchmark the environmental performance of these two processes to conventional processes, i.e. shot peening and turning, respectively. The life cycle inventory of both the laser based processes and conventional processes are developed using SimaPro 7.1 and the Ecoinvent 2.0 database and life cycle impact assessment is performed using US EPA TRACI. The results of this study show that the environmental performance of the two laser based processes is significantly better than conventional processes. For laser shock peening of aluminum, contribution analysis indicates that this is mainly due to the significant extension of fatigue life of the workpiece being treated. For laser assisted turning of compacted graphite iron, the improved performance is mainly due to the extended tool life since cutting tool manufacturing is an energy intensive process. Development of high-power laser with a lower wavelength (e.g. direct diode system) could eliminate the use of paint in laser assisted turning. This, along with improved wall plug efficiency, makes laser assisted turning even more environmentally benign compared to conventional process. A brief cost analysis suggests that both laser shock peening and laser assisted turning can be economically viable with payback period less than three years for niche applications.     

Study on chemical kinetics and catalytic cracking of tar from gasification of rice straw using various catalysts

Journal of Material Cycles and Waste Management - The tar formed within the producer gas is a major problem in the biomass gasification process. The catalytic cracking of tar is the best method to...     

Optimum techno-eco performance requisites for vacuum annulus tube collector–assisted double-slope solar desaltification unit integrated modified parabolic concentrator

Environmental Science and Pollution Research - This work presents a novel approach for a double-slope solar desaltification system having parallel array of evacuated annular tube collectors with...     

Preliminary study of physico-chemical treatment options for hospital wastewater

Hospital effluents are loaded with pathogenic microorganisms, partially metabolized pharmaceutical substances, radioactive elements, and other toxic substances. Such effluents if not treated properly can damage the natural environment and create a biological imbalance. This paper points out the areas of concern for hospital wastewater disposal and reports the findings of a limited physico-chemical study of treatment options for hospital effluents conducted at Christian Medical College and Hospital, Vellore, Tamil Nadu. The effluent collected was checked for conventional parameters and subjected to coagulation experiments. The raw and settled effluents were coagulated with FeCl(3), filtered and disinfected. Physico-chemical treatment seems to be an attractive option for the cost-effective disposal of hospital effluents. The results of this study call for further detailed study in this area.     

Study of fluoride content in groundwater of Nawa Tehsil in Nagaur, Rajasthan

There is a severe fluoride problem in Nawa tehsil of Nagaur district. Villagers are suffering from dental fluorosis and skeletal fluorosis. So an extensive geochemical study of 27 villages of eastern, south-eastern and southern zone of Nawa tehsil was done. Total 46 ground water samples were collected and analyzed for various physicochemical parameters as well as fluoride content. The ground water samples collected in clean polyethylene plastic containers were analyzed for pH, electrical conductivity, total dissolved salts, calcium, magnesium, total hardness, chloride and alkalinity. The fluoride concentration in the three different zones ranged from 0.64 to 14.62 mg l(-1) where 13.04% samples were found within permissible limit while 86.96% had fluoride beyond permissible limit (> 1.5 mg l(-1)). It was found that among the three different zones south-eastern zone was under serious fluoride contamination where fluoride concentration ranged between 1.10 to 14.62 mg l(-1). In the eastern zone fluoride concentration was recorded from 1.52 to 5.13 mg l(-1) whereas in the southern zone it was found between 0.64 to 3.63 mg l(-1).