Dry deposition of nitrogen and sulfur to Ponderosa and Jeffrey pine in the San Bernardino national forest in Southern California

Little is known about the concentrations, deposition rates, and effects of nitrogenous and sulfurous compounds in photochemical smog in the San Bernardino National Forest (SBNF) in southern California. Dry deposition of NO(3)(-) and NH(4)(+) to foliage of ponderosa pine (Pinus ponderosa Laws.) and Jeffrey pine (Pinus jeffreyi Grev. & Balf.) was correlated (R = 0.83-0.88) with historical average hourly O(3) concentations at 10 sites across an O(3) gradient in the SBNF. Mean deposition fluxes of NO(3)(-) to ponderosa and Jeffrey pine branches were 0.82 nmol M(-2)s(-1) at Camp Paivika (CP), a high-pollution site, and 0.19 nmol m(-2) s(-1) at Camp Osceola (CAO), a low-pollution site. Deposition fluxes of NH(4)(+) were 0.32 nmol m(-2) s(-1) at CP and 0.17 nmol m(-2) s(-1) at CAO, while mean values for SO(4)(2-) were 0.03 at CP and 0.02 nmol m(-2) s(-1) at CAO. Deposition fluxes to paper and nylon filters were higher in most cases than fluxes to pine branches at the same site. The results of this study suggest that an atmospheric concentration and deposition gradient of N and S compounds occurs along with the west-east O(3) gradient in the SBNF. Annual stand-level dry deposition rates for S and N at CP and CAO were estimated. Further studies are needed to determine if high N deposition loads in the SBNF significantly affect plant/soil nutrient relations, tree health, and the response of ponderosa pine to ozone.     

Deposition velocities for full-scale corn and soybean canopies: A wind tunnel simulation

Deposition velocities have been determined for corn and soybeans in the first 4–6 weeks of growth in a full-scale study of canopy flow in a wind tunnel. Particles of 1, 5, 10 and 15 μm aerodynamic diameter made of sodium florescein were injected into the Environmental Wind Tunnel Facility at Colorado State University. Deposition velocities were determined as a function of free stream velocity (183, 305 and 610 cm/s) and approach flow turbulence intensity (～1% and 8%). Plants were arranged in realistic field configurations. Hot-wire anemometer studies confirmed that the fluid velocity profiles developed in the wind tunnel were similar to the flow realized in canopies in natural fields. An increase in velocity and turbulence intensity was found to decrease the deposition velocities. A minimum deposition velocity was observed at a particle diameter of 5 μm.     

Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

ENVIRONMENTAL AUDITING: An Approach for Characterizing Tropospheric Ozone Risk to Forests

/ The risk tropospheric ozone poses to forests in the United States is dependent on the variation in ozone exposure across the distribution of the forests in question and the various environmental and climate factors predominant in the region. All these factors have a spatial nature, and consequently an approach to characterization of ozone risk is presented that places ozone exposure-response functions for species as seedlings and model-simulated tree and stand responses in a spatial context using a geographical information systems (GIS). The GIS is used to aggregate factors considered important in a risk characterization, including: (1) estimated ozone exposures over forested regions, (2) measures of ozone effects on species' and stand growth, and (3) spatially distributed environmental, genetic, and exposure influences on species' response to ozone. The GIS-based risk characterization provides an estimation of the extent and magnitude of the potential ozone impact on forests. A preliminary risk characterization demonstrating this approach considered only the eastern United States and only the limited empirical data quantifying the effect of ozone exposures on forest tree species as seedlings. The area-weighted response of the annual seedling biomass loss formed the basis for a sensitivity ranking: sensitive-aspen and black cherry (14%-33% biomass loss over 50% of their distribution); moderately sensitive-tulip popular, loblolly pine, eastern white pine, and sugar maple (5%-13% biomass loss); insensitive-Virginia pine and red maple (0%-1% loss). In the future, the GIS-based risk characterization will include process-based model simulations of the three- to 5-year growth response of individual species as large trees with relevant environmental interactions and model simulated response of mixed stands. The interactive nature of GIS provides a tool to explore consequences of the range of climate conditions across a species' distribution, forest management practices, changing ozone precursors, regulatory control strategies, and other factors influencing the spatial distribution of ozone over time as more information becomes available.KEY WORDS: Ecological risk assessment; GIS; Ozone; Risk characterization; Forests; Trees     

HEAVY RAINFALL DISTRIBUTIONS BY SEASON IN LOUISIANA: SYNOPTIC INTERPRETATIONS AND QUANTILE ESTIMATES1

ABSTRACT: In most studies, quantile estimates of extreme 24-hour rainfall are given in annual probabilities. The probability of experiencing an excessive storm event, however, differs throughout the year. As a result, this paper explored the differences between heavy rainfall distributions by season in Louisiana. It was concluded by using the Kruskal-Wallis and Mann-Whitney tests that the distribution of heavy rainfall events differs significantly between particular seasons at the sites near the Gulf Coast. Furthermore, seasonal frequency curves varied dramatically at the four sites examined. Mixed distributions within these data were not found to be problematic, but the mechanisms that produced the events were found to change seasonally. Extreme heavy rainfall events in winter and spring were primarily generated by frontal weather systems, while summer and fall events had high proportions of events produced by tropical disturbances and airmass (free-convective) conditions.     

Calculating overpressure from BLEVE explosions

Although a certain number of authors have analyzed the prediction of boiling liquid expanding vapour explosion (BLEVE) and fireball effects, only very few of them have proposed methodologies for predicting the overpressure from such explosions. In this paper, the methods previously published are discussed and shown to introduce a significant overestimation due to the erroneous thermodynamic assumptions—ideal gas behaviour and isentropic vapour expansion—on which they are based (in fact, they give the maximum value of overpressure which can be caused by a BLEVE). A new approach is proposed, based on the—more realistic—assumption of an adiabatic and irreversible expansion process; the real properties of the substance involved in the explosion are used. The two methods are compared through the application to a given case.     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.