Changing patterns of radionuclide distribution in Irish Sea subtidal sediments

This paper presents new data on the distribution of long-lived radionuclides in Irish Sea subtidal sediments, contaminated as a result of the BNFL Sellafield discharges. The results from different sampling campaigns in 1999 have been combined to assess the extent of radionuclide mobility relative to earlier surveys, in both the eastern and western Irish Sea areas, and to investigate changes in radionuclide distribution over time. The results appear to confirm the trend of continuing re-distribution and transfer of contamination away from the English coast. West of the Isle of Man, radionuclide concentrations and inventories have remained more or less constant. The inventory of radionuclides in sandy sediments in the eastern Irish Sea is still under-represented by current sampling, but could be improved by deeper and more extensive vibrocoring.     

Data requirements of GREAT-ER: Modelling and validation using LAS in four UK catchments

Higher-tier environmental risk assessments on “down-the-drain” chemicals in river networks can be conducted using models such as GREAT-ER (Geography-referenced Regional Exposure Assessment Tool for European Rivers). It is important these models are evaluated and their sensitivities to input variables understood. This study had two primary objectives: evaluate GREAT-ER model performance, comparing simulated modelled predictions for LAS (linear alkylbenzene sulphonate) with measured concentrations, for four rivers in the UK, and investigate model sensitivity to input variables. We demonstrate that the GREAT-ER model is very sensitive to variability in river discharges. However it is insensitive to the form of distributions used to describe chemical usage and removal rate in sewage treatment plants (STPs). It is concluded that more effort should be directed towards improving empirical estimates of effluent load and reducing uncertainty associated with usage and removal rates in STPs. Simulations could be improved by incorporating the effect of river depth on dissipation rates.     

Influence of hydropower dams on the composition of the suspended and riverbank sediments in the Danube

Large hydropower dams have major impacts on flow regime, sediment transport and the characteristics of water and sediment in downstream rivers. The Gabcikovo and Iron Gate dams divide the studied Danube transect (rkm 1895-795) into three parts. In the Gabcikovo Reservoir (length of 40km) only a part of the incoming suspended sediments were deposited. Contrary to this, in the much larger Iron Gate backwater zone and reservoir (length of 310km) all riverine suspended sediments were deposited within the reservoir. Subsequently, suspended sediments were transported by tributaries into the Iron Gate backwater zone. Here they were modified by fractional sedimentation before they transgressed downstream via the dams. Compared with undammed Danube sections, Iron Gate reservoir sediment and suspended matter showed higher clay contents and different K/Ga and Metal/Ga ratios. These findings emphasize the importance of reservoir-river sediment-fractionation.     

Extraction of soil solution by drainage centrifugation—effects of centrifugal force and time of centrifugation on soil moisture recovery and solute concentration in soil moisture of loess subsoils

The solute concentration in the subsoil beneath the root zone is an important parameter for leaching assessment. Drainage centrifugation is considered a simple and straightforward method of determining soil solution chemistry. Although several studies have been carried out to determine whether this method is robust, hardly any results are available for loess subsoils. To study the effect of centrifugation conditions on soil moisture recovery and solute concentration, we sampled the subsoil (1.5–3.0 m depth) at commercial farms in the loess region of the Netherlands. The effect of time (20, 35, 60, 120 and 240 min) on recovery was studied at two levels of the relative centrifugal force (733 and 6597g). The effect of force on recovery was studied by centrifugation for 35 min at 117, 264, 733, 2932, 6597 and 14,191g. All soil moisture samples were chemically analysed. This study shows that drainage centrifugation offers a robust, reproducible and standardised way for determining solute concentrations in mobile soil moisture in silt loam subsoils. The centrifugal force, rather than centrifugation time, has a major effect on recovery. The maximum recovery for silt loams at field capacity is about 40%. Concentrations of most solutes are fairly constant with an increasing recovery, as most solutes, including nitrate, did not show a change in concentration with an increasing recovery.     

Hydrology-linked spatial distribution of pesticides in a fjord system in Greenland

A pilot study is presented evaluating selected chlorinated pesticides as chemical tracers for water masses in a sub-Arctic fjord system (Godth?bsfjord, western Greenland). Polyoxymethylene (POM) based passive water samplers were deployed during summer-autumn 2010. The levels of the analysed chlorinated pesticides in the fjord surface waters were found to be low compared to earlier studies. α-Hexachlorocyclohexane (α-HCH) and hexachlorobenzene (HCB) were the predominant contaminants. However, these two compounds have higher levels in oceanic water compared to freshwater influenced fjord waters. These chemicals can thus be considered as indicators for direct atmospheric long-range transport, while the organochlorine pesticides like trans-, cis-chlordane, trans-nonachlor and oxychlordane that are detected in the inner parts of the fjord are indicators for potential freshwater sources such as rivers and glacial meltwater runoff (secondary sources). The average values were 50 pg L(-1) for HCB and 11 pg L(-1) for α-HCH. These concentrations are comparable to levels in fjords in Svalbard (Norwegian Arctic), but lower than in open and/or ice covered oceans in the Canadian Arctic. Two air samplers were deployed for the identification of direct atmospheric contributions. Local contamination sources do not contribute significantly. The study demonstrated the value of passive water sampling devices for comprehensive hydrological characterization of Arctic coastal waters.     

Response of marine benthic fauna to thin-layer capping with activated carbon in a large-scale field experiment in the Grenland fjords,Norway

Environmental Science and Pollution Research - A field experiment with thin-layer capping was conducted in the Grenland fjords, Norway, for remediation in situ of mercury and dioxin-contaminated...     

An exploration of the potential for re-distributed manufacturing to contribute to a sustainable,resilient city*

Abstract

Re-distributed manufacturing (RDM), broadly described as manufacturing done at a smaller-scale and locally, could be beneficial to business and urban society through creating jobs, reducing the environmental impacts of production, and improving resilience to future disturbances. Consideration of RDM within a city-region requires the consideration of a wide range of issues – societal, technical, economic and environmental. This paper presents the results of a study into the potential for RDM to contribute to a sustainable, resilient city in the face of a range of expected future disturbances on the city and on manufacturing sectors. The study took an integrated assessment approach which incorporated the development of a conceptual framework; a ‘strawman’ causal loop diagram which was reviewed by participants in a workshop; and a stock and flow system dynamics model that represents our understanding about the structure and behaviour of urban manufacturing. Several key themes emerged: similarities between RDM and traditional manufacturing, availability of physical space for RDM to be done, achieving urban resilience through RDM by enabling responsiveness to disturbances, changes in environmental impacts from production, additions or losses in jobs, the competitiveness of local manufacturing, and skills and innovation for RDM technologies. Further work is recommended.     

Bisphenol A in human placental and fetal liver tissues collected from Greater Montreal area (Quebec) during 1998-2008

In this study, the presence of bisphenol A (BPA) in human placental and fetal liver samples collected from 1998 to 2008 was investigated to provide a more detailed analysis of the transfer of BPA across the placenta and fetal exposure to BPA. The average concentrations in placental samples were 12.6 ng g⁻¹ for free BPA, 17.2 ng g⁻¹ for BPA-glu, and 30.2 ng g⁻¹ for total BPA. The highest concentrations in placental samples were 165 ng g⁻¹ for free BPA, 178 ng g⁻¹ for BPA-glu, and 280 ng g⁻¹ for total BPA. Samples with higher levels of BPA-glu had higher levels of free BPA in general. Fetal age was observed to have a significant effect on BPA-glu levels in placental samples, but not on free or total BPA. The percentages of free BPA relative to total BPA for the placental samples varied considerably from 4.2% to 100%, suggesting that the ability of maternal liver and/or the placenta to conjugate BPA is highly variable during early to mid-gestation. The average concentrations in fetal liver samples were 9.02 ng g⁻¹ for free BPA, 19.1 ng g⁻¹ for BPA-glu, and 25.8 ng g⁻¹ for total BPA. The highest concentrations in fetal liver samples were 37.7 ng g⁻¹ for free BPA, 93.9 ng g⁻¹ for BPA-glu, and 123 ng g⁻¹ for total BPA. The percentages of free BPA level relative to total BPA for all fetal liver samples varied from 12.4% to 99.1%, indicating extensive variability in the ability of the human feto-placental unit to glucuronidate BPA.