Identification of material flow systems

Material Flow Analysis (MFA) has become an important instrument in environmental science and pollution research. In this paper, we look at the MFA problem as a particularly structured system identification problem. Special emphasis is given to the linear, static case, where we describe a procedure for reconciliating the flow measurements and for estimating the unmeasured flows and the transfer coefficients by taking into account a priori restrictions such as balance equations.     

Social evolution and its correlates in bees of the subgenus Evylaeus (Hymenoptera; Halictidae)

Summary Eleven behavioural characteristics of eight species of the subgenus Evylaeus were analysed using principal components analysis. The first component axis represents social level and explains over forty percent of the total variation in the data. The following characteristics are highly correlated with social level — (i) a reduction in the proportion of males in the first brood, (ii) a reduction in the proportion of workers that mate, (iii) a reduction in the proportion of workers that have developed ovaries, (iv) an increase in the mean number of workers, (v) increased contact between adults and developing brood and (vi) an increase in the size difference between queens and workers. Because these factors appear, in general, to be under the control of the queen it is argued that parental manipulation has been an important component of social evolution in these bees. The number of worker broods and the mechanism of male production are also related to social level but are less important. Nest architecture, nest defense and polygyny seem to be unrelated to social level. Variation in nest architecture may be in response to edaphic features of the substrate. The lack of any relationship between polygyny and social level implies that the semisocial route to eusociality was not the one taken. It is likely that polygyny can only occur where the substrate is suitable for the winter hibernation of sisters in their natal nest. Multivariate methods are useful in determining the relative social level of closely related halictine species.     

Neurobiology of the homing pigeon—a review

Homing pigeons are well known as good homers, and the knowledge of principal parameters determining their homing behaviour and the neurological basis for this have been elucidated in the last decades. Several orientation mechanisms and parameters—sun compass, earth’s magnetic field, olfactory cues, visual cues—are known to be involved in homing behaviour, whereas there are still controversial discussions about their detailed function and their importance. This paper attempts to review and summarise the present knowledge about pigeon homing by describing the known orientation mechanisms and factors, including their pros and cons. Additionally, behavioural features like motivation, experience, and track preferences are discussed. All behaviour has its origin in the brain and the neuronal basis of homing and the neuroanatomical particularities of homing pigeons are a main topic of this review. Homing pigeons have larger brains in comparison to other non-homing pigeon breeds and particularly show increased size of the hippocampus. This underlines our hypothesis that there is a relationship between hippocampus size and spatial ability. The role of the hippocampus in homing and its plasticity in response to navigational experience are discussed in support of this hypothesis.     

工业粉体下落过程粉尘排放特性的实验研究

根据与维也纳工业大学化学工程研究所共同确定的实验方案,在实验室开发并设计了一套自由下落装置,研究粉体下落过程中粉尘的排放特性。通过实验主要测定下落高度、空气湿度和质量流量对粉尘排放的影响。实验结果表明,下落高度和空气湿度对粉尘排放均有影响,且空气湿度对粗粒子的排放影响较大,对细粒子影响较小;随着质量流量的增加,粉尘产生率逐渐减小,但质量流量的增加也会增加粉尘浓度,加重了对工人的危害。建立了影响因素与粉尘产生率之间的数学模型,经检验,二者之间存在显著相关,实测值与理论计算值基本一致,可以应用已建立的数学模型定量评价粉尘产生量。     

Role of waste management with regard to climate protection: a case study.

According to the Kyoto Protocol and the burden-sharing agreement of the European Union, Austria is required to cut greenhouse gas (GHG) emissions during the years 2008 to 2012 in order to achieve an average reduction of 13%, based on the level of emissions for the year 1990. The present contribution gives an overview of the history of GHG emission regulation in Austria and identifies the progress made towards the realization of the national climate strategy to attain the GHG emission targets. The contribution uses Austria as an example of the way in which proper waste management can help to reduce GHG emissions. The GHG inventories show that everything must be done to minimize the carbon input due to waste deposition at landfill sites. The incineration of waste is particularly helpful in reducing GHG emissions. The waste-to-energy by incineration plants and recovery of energy yield an ecologically proper treatment of waste using state-of-the-art techniques of a very high standard. The potential for GHG reduction of conventional waste treatment technologies has been estimated by the authors. A growing number of waste incinerators and intensified co-incineration of waste in Austrian industry will both help to reduce national GHG emissions substantially. By increasing the number and capacity of plants for thermal treatment of waste the contribution of proper waste management to the national target for reduction of GHG emissions will be in the range of 8 to 14%. The GHG inventories also indicate that a potential CO2 reduction of about 500 000 t year(-1) is achievable by co-incineration of waste in Austrian industry.     

Simultaneous monitoring of profiles of polycyclic aromatic hydrocarbons in contaminated air with semipermeable membrane devices and spruce needles

Gaseous emissions of combusted electronic scrap, PVC, carpet and wood were monitored for polycyclic aromatic hydrocarbons (PAHs) by simultaneous use of semipermeable membrane devices (SPMDs) and shoots of spruce needles (Picea abies). It was found that phenanthrene, acenaphthylene and fluorene were the dominating PAHs in all samples. SPMDs and needles mainly sequestered PAH associated with the vapor phase. Particle-bound PAHs were only detected in small amounts, at which the needles tended to uptake more of these compounds in comparison to the SPMDs. Nevertheless, the logarithm of the concentrations of PAHs analyzed in both passive samplers after the same sampling period exhibited a significant linear correlation with correlation coefficients larger than 0.8073. SPMDs and spruce needles can complement each other in passive air sampling for compounds with a preference to the gas phase rather than aerosols.     

The impact of domestic wood burning on personal, indoor and outdoor levels of 1,3-butadiene, benzene, formaldehyde and acetaldehyde

The aim of this study was to quantify personal exposure and indoor levels of the suspected or known carcinogenic compounds 1,3-butadiene, benzene, formaldehyde and acetaldehyde in a small Swedish town where wood burning for space heating is common. Subjects (wood burners, n = 14), living in homes with daily use of wood-burning appliances were compared with referents (n = 10) living in the same residential area. Personal exposure and stationary measurements indoors and at an ambient site were performed with diffusive samplers for 24 h. In addition, 7 day measurements of 1,3-butadiene and benzene were performed inside and outside the homes. Wood burners had significantly higher median personal exposure to 1,3-butadiene (0.18 microg m(-3)) compared with referents (0.12 microg m(-3)), which was also reflected in the indoor levels. Significantly higher indoor levels of benzene were found in the wood-burning homes (3.0 microg m(-3)) compared with the reference homes (1.5 microg m(-3)). With regard to aldehydes, median levels obtained from personal and indoor measurements were similar although the four most extreme acetaldehyde levels were all found in wood burners. High correlations were found between personal and indoor levels for all substances (r(s) > 0.8). In a linear regression model, type of wood-burning appliance, burning time and number of wood replenishments were significant factors for indoor levels of 1,3-butadiene. Domestic wood burning seems to increase personal exposure to 1,3-butadiene as well as indoor levels of 1,3-butadiene and benzene and possibly also acetaldehyde. The cancer risk from these compounds at exposure to wood smoke is, however, estimated to be low in developed countries.     

Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management

There is an increasing interest in the end-of-life management of polymers present in waste electrical and electronic equipment (WEEE). This is mainly due to high recycling and recovery quotas set by the European WEEE directive, which can only be fulfilled by including the plastic fraction in recycling and recovery approaches. Previous studies identified a high material diversity and various contaminants in WEEE plastics, including heavy metals, polybrominated biphenyls (PBB), diphenyl ethers (PBDE), as well as polybrominated dibenzodioxins and dibenzofurans (PBDD/F). These substances are regulated by European directives that limit their levels in marketable products. Consequently, both material diversity and contaminants are strong arguments against material recycling and point to hazardous waste treatment. However, recent developments in the production of flame retardants and electrical and electronic goods aimed to reduce contaminants and material diversity. Thus, the present study summarises updated contaminant levels of plastic fractions of European WEEE, as well as data on materials in waste housing polymers. Material characterisation revealed housing fractions to be interesting sources for polymer recycling, which however has to implement potent material separation and/or bromine elimination techniques. With respect to contaminants, our data indicate an effective phase-out of PBB, but still high levels of PBDE and PBDD/F are found. Sources and implications for the material recycling and thermal recovery approaches are discussed in detail.