Towards the selection of a produced water enrichment for biological gas hydrate inhibitors

Economic concerns associated with the recovery of non-conventional hydrocarbon reserves include unexpected ice as well as ice-like gas hydrate formation. Antifreeze proteins (AFPs) inhibit ice growth, and experiments with fish, plant, and insect AFPs have shown promise of effective gas hydrate inhibition in lab-scale experiments. If produced on an industrial scale, AFPs could provide a more environmentally friendly alternative to kinetic inhibitors, but a large-scale production of these AFPs is not currently feasible. We believe that these difficulties could be surmounted by the production of microbial AFPs, but to date, only a few such proteins have been identified and purified, and none of these are associated with hydrocarbon reserves. Here, we have used ice-affinity and freeze-thaw stress to select microbes derived from oil and gas formation water, or produced water, as a source of anaerobic microbial communities. Ice-affinity successfully incorporated anaerobic bacteria under aerobic conditions, and the mixed culture had ice-associating properties. Under these conditions, ice-affinity selection does not result in cultivatable isolates, but similar, cultivable microbes were obtained following freeze-thaw selection under anaerobic conditions. Since these mixed cultures inhibited the growth of ice crystals, they also have the potential to inhibit hydrate growth. Overall, freeze-thaw selection provides a promising first step towards the isolation of microbes capable of the inhibition of ice and gas hydrate growth, for possible application for energy exploration and recovery at high-latitudes and in-deep, cold waters.     

Improved Ventilation of Open Top Greenhouses

Plant injury caused by air pollutants is a well recognized effect causing economic losses totalling millions of dollars. Farm crops, forest species, and ornamentals are all affected depending upon kind of plant and degree of exposure. Benedict¹ estimated the minimum annual agricultural losses in the U. S. to be $132 million in 1969-1971. Millecan² estimated California crop losses caused by air pollutants to be at least $25 million in 1972. Recent studies by Brewer³ in which conventional greenhouses were placed in the field over cotton gave results showing yields were reduced by 10-30% in the San Joaquin valley where significant levels of photochemical smog occur. However, these estimates of losses represent little more than educated guesses because the procedures available for obtaining the information are so imprecise.     

Determination of lindane leachability in soil-biosolid systems and its bioavailability in wheat plants

The leachability of lindane from different biosolid amended soils was determined and compared to its bioavailability. Sand, soil, and a mixture of soil-sand (1:1 w/w) were spiked with lindane, blended with different amounts of biosolids, and subjected to a leaching process with water that lasted for 1-28 d. This procedure is in accordance with ISO/TS 21268-1: 2007. After these batch tests, lindane was extracted from the leachates using three different solvent-free microextraction techniques, including solid phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and silicone rod extraction (SRE). The amount of lindane was determined with thermal desorption and gas chromatography coupled to mass spectrometry (GC-MS). The efficiencies of the three microextraction techniques were statistically different, and the efficiency could be related to the amount of polydimethylsiloxane (PDMS) in each extraction device. However, all of the techniques provide data that shows that the leachability of lindane is dependent on the amount of organic matter contained in the matrix.The results of the lindane leachability assay were compared to the bioavailability of lindane, which was determined by measuring the amount of lindane that accumulated in the roots of wheat plants grown in similar soil-biosolid systems.It was confirmed that the amount of organic matter in the matrix is a determining factor for lindane immobilization. The presence of biosolids decreases the mobility of lindane in all of the systems under study. Similarly, increasing biosolid concentrations in the soil significantly decreased the bioavailability of lindane and, consequently, plant absorption.The good correlation (R² = 0.997) between the leachability of lindane from the matrix and plant absorption of lindane indicates that the proposed biomimetic methodology can predict the bioavailability of lindane in a time period as short as 7 d.The results of this work confirm that amending contaminated soils with biosolids is beneficial for immobilizing lindane and helps prevent the percolation of lindane through the soil profile and into groundwater.     

Humanarzneimittel im aquatischen Ökosystem

Goal

In the Brandenburg State Office for the Environment an approach to assess the potential risk of drug residues in aquatic ecosystems has been developed based on an investigation of the consumption amounts in 1999 to identify or to exclude a potential environmental risk of important human drugs and further to define priority substances for monitoring programs in Brandenburg in the future.

Method

This assessment approach tested with 60 drug agents is based on an exposure estimation considering the main path for the entry human—waste water—sewage plant—surface water, on a substance specific analysis of effects and on an analysis of the environmental fate as compartment distribution, bioaccumulation and persistence.

Results

In Brandenburg surface waters the drug agent concentration for eight of the considered substances is supposed to be greater than 1 μg/l and for at least 13 of the considered substanoes the PNEC in aquatic ecosystems is assumed to be lower than 1 μg/l. A potential risk for the environment can be seen for the antibiotics Ciprofloxacin-HCl and Clarithromycin, the disinfectants Benzalkonium Chloride, Cocospropylendiaminguaniacetat, Glucoprotamine, Laurylpropylenediamine and Polyvidone-iodine, the sexual hormon Ethinylestradiol, the antidiabetic Metformin-HCl, the antiepileptic Carbamazepine and the lipid regulator Clofibrinic acid on the basis of effects because their PEC:PNEC-relation is about 1 or higher. For further 19 drug agents an environmental risk is to be assumed because of their environmental behaviour without support by ecotoxicological data at present.

Conclusion

Although there is only a small base of valid ecotoxicological data, this risk assessment shows that adverse effects in the aquatic environment by some drug agents cannot be excluded. However, it should be noted that this first assessment gives only a crude orientation. Appropriate test data are necessary to refine the assessment in future.     

Residues of dioxins and PCBs in fat of growing pigs and broilers fed contaminated feed

To investigate the kinetics of PCBs and dioxins, 3 week old broilers and 3 month old pigs were fed with a 10-fold diluted feed from the Belgium crisis for one week, followed by a period on clean feed. In the case of broilers this resulted in levels for dioxins, non-ortho and mono-ortho PCBs in fat of 102, 84 and 216 ng TEQ/kg, summarized to 402 ng TEQ/kg. Total levels decreased to 217 and 109 ng TEQ/kg after 1 and 3 weeks on clean feed. Indicator PCB levels decreased from an initial 6.2 mg/kg fat to respectively 3.2 and 1.5 mg/kg. The ratio of indicator PCBs to dioxins TEQs was stable over this period. Levels in back fat of pigs at the end of the exposure period were 26, 15, 82 and 123 ng TEQ/kg for respectively dioxins, non-ortho PCBs, mono-ortho PCBs and the sum. Total TEQ levels decreased to respectively 95, 70, 40, 22 and 12 ng TEQ/kg after 1, 2, 4, 8 or 12 weeks on clean feed. After 12 weeks dioxin levels were around 1 ng TEQ/kg. Indicator PCB levels decreased from 3.48 mg/kg to 2.65, 2.01, 1.25, 0.76 and 0.45 mg/kg fat, again after 1, 2, 4, 8 or 12 weeks on clean feed. Levels of dioxins decreased more rapidly than those of indicator PCBs, also reflected by the ratio of indicator PCBs to dioxins, being 133,000 at the end of the exposure period and 357,000 after week 12. It is concluded that the use of indicator PCBs for dioxins, in the case of a combined exposure, is a safe alternative for screening and in the case of pigs results in an overestimation rather than underestimation of the dioxin levels.     

Interactions between morphological and physiological plasticity optimize energy acquisition in corals

Morphological plasticity in response to environmental heterogeneity may be performance enhancing or may simply result from an intrinsic instability in morphology during development. Although patterns of morphological change are well documented for numerous taxa, it is often unclear whether this plasticity enhances the performance of organisms in the habitat to which they have acclimatized. Reef-building corals are an ideal model system in which to investigate this question. We here develop a three-dimensional geometric model and present a comprehensive photosynthesis data set with experimentally calibrated photosynthesis models that predicts energy acquisition by foliose corals as a function of colony shape. This allows us to assess the extent to which changes in colony morphology along an environmental gradient track the predicted optimal colony morphologies. Our results provide strong evidence that phenotypic plasticity in foliose corals optimizes photosynthetic energy acquisition and is not simply a mechanism to increase light capture. We show that the optimal morphology is constrained at the boundaries of the environmental gradient, with non-optimal morphologies in these habitats having greatly reduced energy acquisition. However, at the center of the environmental gradient, flexibility in photophysiology allows energy acquisition to be very similar for multiple morphologies. Our results highlight the importance of phenotypic plasticity at multiple scales. Variation in overall morphology is important at niche boundaries at which conditions are consistently more stressful, whereas physiological flexibility is important in intermediate and less predictable habitats in which a rapid and reversible response to environmental fluctuations is required.     

Experimental investigation of wood combustion in a fixed bed with hot air

Waste combustion on a grate with energy recovery is an important pillar of municipal solid waste (MSW) management in the Netherlands. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Typically, the reaction zone starts at the top of the waste layer and propagates downwards, producing heat for drying and devolatilization of the fresh waste below it until the ignition front reaches the grate. The control of this process is mainly based on empiricism.MSW is a highly inhomogeneous fuel with continuous fluctuating moisture content, heating value and chemical composition. The resulting process fluctuations may cause process control difficulties, fouling and corrosion issues, extra maintenance, and unplanned stops. In the new concept the fuel layer is ignited by means of preheated air (T > 220 °C) from below without any external ignition source. As a result a combustion front will be formed close to the grate and will propagate upwards. That is why this approach is denoted by upward combustion.Experimental research has been carried out in a batch reactor with height of 4.55 m, an inner diameter of 200 mm and a fuel layer height up to 1 m. Due to a high quality two-layer insulation adiabatic conditions can be assumed. The primary air can be preheated up to 350 °C, and the secondary air is distributed via nozzles above the waste layer. During the experiments, temperatures along the height of the reactor, gas composition and total weight decrease are continuously monitored. The influence of the primary air speed, fuel moisture and inert content on the combustion characteristics (ignition rate, combustion rate, ignition front speed and temperature of the reaction zone) is evaluated.The upward combustion concept decouples the drying, devolatilization and burnout phase. In this way the moisture and inert content of the waste have almost no influence on the combustion process. In this paper an experimental comparison between conventional and reversed combustion is presented.     

Hochwasser 2002

In August 2002, highly contaminated areas in the region of Bitterfeld, e.g. the floodplain of the creek Spittelwasser, as well as the adjacent regions of Jeßnitz and Raguhn, were submerged by the river Mulde. An input of mobilized contaminated sediments in residential areas was the matter of concern. The objective of the present study was to estimate the pollutants load on the basis of chemical and biological data and identify the sources of pollutants. Deposited sludge and flood water samples were assessed on the basis of biological and chemical analyses and in comparison with administrative reference values. The pollution of the investigated sites was rather heterogeneous. At several sites, tolerance limits of the German Klärschlammverordnung or the Bundesbodenschutzverordnung were clearly exceeded, e.g. for Pb, As and HCH. Organic extracts exhibited significant effects in several biotests. This may be relevant with respect to direct particle uptake via ingestion or respiration. Pollution patterns for heavy metals as well as for organic pollutants differed significantly from the pattern found in the Spittelwasser flood plain before the inundation, which is in contrast to the initial hypothesis of a possible transport of contaminated Spittelwasser sediments into residential areas. Interestingly, a correlation of chemical load and the overall biological effect could be shown. From the viewpoint of the precautionary principle, the identification of the compounds exerting toxic effects and of the respective pollutant sources would be desirable.