Photochemical behaviour of musk tibetene

BACKGROUND: Synthetic musk compounds are widely used as additives in personal care and household products. The photochemical degradation of musk tibetene in aqueous solutions or in acetonitrile/water mixtures under different conditions was studied in order to assess its environmental fate. METHODS: Musk tibetene dissolved (or suspended) in water and/or acetonitrile/water mixtures was irradiated at different times by UV-light and by solar light. The irradiation mixtures were analyzed by NMR and TLC. The photoproducts formed were identified by GC-MS and NMR data. RESULTS: The experimental results indicated that musk tibetene was photodegradable in water or acetonitrile/water mixtures with half-life reaction times close to 20 minutes. The irradiation mixtures were separated by chromatographic techniques yielding three photoproducts (3,3,5,6,7-pentamethyl-4-nitro-3H-indole, 3,3,5,6,7-pentamethyl-4-nitro-1H-indoline and 3,3,5,6,7-pentamethyl-4-nitro-3H-indolinone) identified by means of spectroscopic analysis. DISCUSSION: The numerical modelling of the photodegradation concentration-time profiles gave (8.13 +/- 0.15) x 10(-2) and (1.34 +/- 0.04) x 10(-2) mol/E for the overall primary quantum yield of direct photolysis for musk tibetene and the major intermediate (3,3,5,6,7-pentamethyl-4-nitro-3H-indolinone), respectively, in the wavelength range 305-366 nm. The half-life times of photodegradation of the both substances varied from 1-1.5 hours at 20 degrees N during the summer season to 6-10 hours for highest latitudes in winter. CONCLUSIONS: Under solar light, musk tibetene was photolabile in acetonitrile and acetonitrile/water 1/1, while it was slowly degraded when suspended in water. In all media, musk tibetene was photodegraded into three photoproducts. By using a kinetic model, the overall primary quantum yields of direct photolysis of musk tibetene and its main photoproduct, in the wavelength range 305-366 nm, were estimated, indicating that the photodegradation rate for musk tibetene is faster than the photolysis rate of the major by-product. RECOMMENDATIONS AND PERSPECTIVES: The results indicate that, in order to assess the environmental impact of musk tibetene on the aquatic ecosystem, great attention should be focused on the major photoproduct which is proved to be more persistent than the parent compound under light irradiation. The predicted half-life times of direct photolysis for both substances ranged from 1-1.5 hours at 20 degrees N during the summer season to about 6-10 hours for highest latitudes in winter, indicating that, from a photochemical point of view, the environmental persistence of these substances increases by increasing the latitudes and during the cold seasons, making more realistic an intake of these xenobiotic molecules into the food chain of aquatic living organisms. Tanabe reports in his Editorial (Tanabe 2005) that "It is necessary to have knowledge of the global picture of synthetic musk pathways. So, it is conceivable that now is the time to study the transport, persistency, distribution, bioaccumulation and toxic potential of this new environmental menace on a global scale, especially in developing countries". Therefore, the future environmental analysis and investigations on the eco-toxicity of nitro musk compounds should take into account not only the presence of the parent compounds but also their photochemical intermediates or end-by-products.     

Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As=Cu>Mo>Pb>V>Co>Cr>Zn; lichen samples in the order: Mo>Cu>As=Co=Ni>V>Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts.     

Kinetic and chemical assessment of the UV/H2O2 treatment of antiepileptic drug carbamazepine

The UV/H2O2-induced degradation of carbamazepine, a worldwide used antiepileptic drug, recently found as contaminant in many municipal sewage treatment plant (STP) effluents and other aquatic environments, is investigated. The oxidation treatment caused an effective removal of the drug. At complete abatement of the substrate after 4 min treatment, a 35% value of removed total organic carbon (TOC) was obtained. A kinetic constant of (2.05+/-0.14) x 10(9) lmol(-1)s(-1) was determined for OH radical attack to carbamazepine in the UV/H2O2 process. Preparative TLC of the reaction mixture led to the isolation of acridine-9-carboxaldehyde as a reaction intermediate. HPLC and GC/MS analysis indicated formation of small amounts of acridine, salicylic acid, catechol and anthranilic acid among the reaction products. Under the same reaction conditions, synthetically prepared 10,11-epoxycarbamazepine was easily degraded to acridine as main product, suggesting that this epoxide is a likely intermediate in the oxidative conversion of carbamazepine to acridine. Under sunlight irradiation, carbamazepine in water underwent slow degradation to afford likewise acridine as main product. In view of the mutagenic properties of acridine, these results would raise important issues concerning the possible environmental impact of carbamazepine release through domestic wastewaters and support the importance of prolonged oxidation treatments to ensure complete degradation of aromatic intermediates.     

Detailed thermal and kinetic modeling of cumene hydroperoxide decomposition in cumene

The characterization of thermal decomposition of cumene hydroperoxide (CHP) in cumene from kinetic point of view is of great interest for industrial applications. However, the efforts done so far by the researchers lead only to the availability of single kinetic laws (first order, autocatalytic, etc.) whose usefulness is strongly limited by the presence in the starting solutions of some impurities. A detailed model aiming at simulating both, thermal and kinetic behavior of the system, is now presented. In other words, the proposed model tries to simulate CHP thermal decomposition process at varying reaction conditions (different initial temperature, in the range 120–160 °C, different initial CHP concentrations, addition of α-methylstyrene to CHP solutions in cumene) and during isothermal, scanning and adiabatic runs. A good capability of the model is observed to simulate the system behavior by using data collected under isothermal and adiabatic conditions and during scanning calorimetric runs. It is important to stress that the use of the model proposed in the present investigation does not require the adoption of adjustable parameters.     

Recovery of different waste vegetable oils for biodiesel production: A pilot experience in Bahia State,Brazil

In Brazil, and mainly in the State of Bahia, crude vegetable oils are widely used in the preparation of food. Street stalls, restaurants and canteens make a great use of palm oil and soybean oil. There is also some use of castor oil, which is widely cultivated in the Sertão Region (within the State of Bahia), and widely applied in industry. This massive use in food preparation leads to a huge amount of waste oil of different types, which needs either to be properly disposed of, or recovered. At the Laboratorio Energia e Gas-LEN (Energy & Gas lab.) of the Universidade Federal da Bahia, a cycle of experiments were carried out to evaluate the recovery of waste oils for biodiesel production. The experiences were carried out on a laboratory scale and, in a semi-industrial pilot plant using waste oils of different qualities. In the transesterification process, applied waste vegetable oils were reacted with methanol with the support of a basic catalyst, such as NaOH or KOH. The conversion rate settled at between 81% and 85% (in weight). The most suitable molar ratio of waste oils to alcohol was 1:6, and the amount of catalyst required was 0.5% (of the weight of the incoming oil), in the case of NaOH, and 1%, in case of KOH.The quality of the biodiesel produced was tested to determine the final product quality. The parameters analyzed were the acid value, kinematic viscosity, monoglycerides, diglycerides, triglycerides, free glycerine, total glycerine, clearness; the conversion yield of the process was also evaluated.     

Integrating local and technical knowledge to support soil salinity monitoring in the Amudarya river basin

The role of monitoring is changing due to the increasing awareness of complexity and uncertainty in environmental resources management. Monitoring systems are required to support critical reflection about the effectiveness of actions toward the achievement of management objectives. To this aim, monitoring should be based on a strong integrated and multi-scale approach. Monitoring costs could be prohibitive if the monitoring is only based on traditional scientific methods of measurements. To deal with these issues, the design of an innovative monitoring system should be based on the integration between different sources of knowledge and information. In this work the usability of local knowledge to support environmental monitoring is investigated. A multi-step participatory monitoring design process has been implemented aiming to design a program for soil salinity monitoring in the lower Amudarya river basin in Uzbekistan. Although there is an increasing awareness of the importance of stakeholders being involved in decision processes, the current socio-cultural and institutional context is not favourable to the participatory approach. The choice of method to be implemented in this work was influenced by such conditions. The analysis of the lessons learned from the experiences gained in this project revealed some important clues concerning the development of a locally-based monitoring program. These lessons can be subdivided according to three fundamental issues: the long term involvement of local community members in monitoring activities, the acceptance of locally-based monitoring systems by decision makers, and the reliability of monitoring information.     

Persistent pollutants and the patchiness of urban green areas as drivers of genetic richness in the epiphytic moss Leptodon smithii

We determined genetic variation and metal and polycyclic aromatic hydrocarbon concentrations in Leptodon smithii moss collected in holm oak stands at cities, outskirts and remote areas of Campania and Tuscany（Italy） to investigate if anthropogenic pressure（pollutant emissions and land use change） affects moss genetic richness. In both regions, metal and polycyclic aromatic hydrocarbon concentrations reflected the trend urban 〉 outskirts 〉 remote areas, excepting Tuscany remote site. In both regions,the moss gene diversity increased from urban to remote areas. The findings suggest the extent and the fragmentation of urban green areas, as drivers of moss genetic richness.