Effects of atmospheric pollution on lichen biodiversity (LB) in a Mediterranean region (Liguria, northwest Italy)

The effects of air pollution on lichen biodiversity (LB) were monitored in Liguria (northwest Italy). A systematic sampling strategy was adopted in order to avoid the influence of spatial autocorrelation on the results. An eight LB class scale permitted to point out the levels of naturality/alteration in the region. The comparison of these results with the ones obtained by mean of physico-chemical methodologies shows a good accordance. The results of this study suggest the possibility of designing an integrated monitoring network, in which biological monitoring will allow to estimate the level of alteration in remote areas, which account for most of this region and which are currently not covered by measurements with automatic systems.     

Application of semipermeable membrane device for assessing toxicity in drinking water

Semipermeable membrane devices (SPMDs) mimic passive diffusive transport of bioavailable hydrophobic organic compounds through biological membranes and their partitioning between lipids and environmental levels. Our study was developed on a surface water treatment plant based in Turin, Northern Italy. The investigated plant treats Po River surface water and it supplies about 20% of the drinking water required by Turin city (about one million inhabitants). Surface water (input) and drinking water (output) were monitored with SPMDs from October 2001 to January 2004, over a period of 30 days. The contaminant residues, monthly extracted from SPMDs by dialysis in organic solvent, were tested with the Microtox^TM acute toxic test and with the Ames mutagenicity test. Same extracts were also analyzed with gaschromatography—mass spectrometry technique in order to characterise the organic pollutants sampled, especially Polycyclic Aromatic Hydrocarbons (PAHs).

Although the PAHs mean concentration is about one hundred times lower in the output samples, the mean toxic units are similar in drinking and surface water.

Our data indicate that the SPMD is a suitable tool to assess the possible toxicity in drinking water.     

A new route for the chemical valorisation of lactose

A totally protected di-O-benzyl derivative of triacetonlactose dimethyl acetal was transformed into a 4'-hexeno disaccharide by elimination of acetone with t-BuOK in DMF and subsequently in 5'-C-methoxy derivative by oxidation with MCPBA in methanol as a solvent. The hydrolysis of this latter compound affords 2,6-di-O-benzyl-L-arabino-aldohexosos-5-ulose, which by intramolecular aldol condensation with DBU gives an inosose that was stereoselectively reduced to epi-inositol. Therefore our synthetic strategy offers a new and simple method to transform lactose into carbocyclic monosaccharide analogues.     

Mater-Bi: Properties and biodegradability

This paper examines the biodegradability of a new class of materials based on starch and vinylalcohol copolymers, which have been commercialized under the Mater-Bi trademark. Particular attention is given to the biodegradation process for natural and synthetic components of different Mater-Bi grades for film blowing in an aerobic respirometric test, in a SCAS (semicontinuous activated sludge) test, and by submersion in lake water. The correlation between morphology and biodegradation behavior is also considered. Taking into account the prior art on biodegradation of insoluble substrates, a two-step mechanism is proposed for Mater-Bi products.     

Assessment of Coastal Vulnerability Through the Use of GIS Tools in South Sicily (Italy)

This study assessed coastal erosion vulnerability along a 90-km sector, which included both erosional and accretionary beaches, and different levels of human occupation. Two aerial photogrammetric flights were used to reconstruct coastal evolution between 1977 and 1999. During this period, extensive accretion was recorded updrift of human structures at harbors and ports, e.g., Scoglitti (105.6 m), Donnalucata (52.8 m), and Pozzallo (94.6 m). Conversely, erosion was recorded in downdrift areas, with maximum values at Modica Stream mouth (63.8 m) and Point Castellazzo (35.2 m). Assessments were subsequently divided into four categories ranging from “high erosion” to “accretion.” Several sources were examined to assess human activities and land use. The latter was mapped and divided into four categories, ranging from “very high” to “no capital” land use. Subsequently, coastal erosion vulnerability was assessed by combining land use categories with recorded coastline behavior. Results showed “very high” to “high” vulnerability along 5.8% and 16.6%, respectively, of the littoral, while 20.9% and 56.7%, respectively, was found to exhibit “medium” and “low/very low” vulnerability. A very good agreement between predicted coastal vulnerability and coastal trend had been observed over recent years. Furthermore, several human structures and activities are located within the “imminent collapse zone (ICZ)” which reached maximum values of 17.5 m at Modica Stream and 13.5 m at Point Braccetto.     

Ambient monitoring of asbestos in selected Italian living areas

This paper presents the results of an intensive monitoring activity of the particulate, fall-out and soil of selected living areas in Italy with the aim to detect the asbestos concentration in air and subsequent risk of exposure for the population in ambient living environments, and to assess the nature of the other mineral phases composing the particulate matrix. Some areas were sorted out because of the presence of asbestos containing materials on site whereas others were used as blank spots in the attempt to detect the background environmental concentration of asbestos in air. Because the concentration of asbestos in ambient environments is presumably very low, and it is well known that conventional low–medium flow sampling systems with filters of small diameter (25 mm) may collect only a very small fraction of particulate over a short period, for the first time here, an intense monitoring activity was conducted with a high flow sampling system. The high flow system requires the use of large cellulose filters with the advantage that, increasing the amount of collected dust, the probability to collect asbestos fibers increases. Both the protocol of monitoring and analysis are novel and prompted by the need to increase the sensitivity towards the small number of expected fibers. With this goal, the collection of fall-out samples (the particulate falling into a collector filled with distilled water during the monitoring shift) and soil samples was also accomplished. The analytical protocol of the matrix particulate included preliminary X-ray powder diffraction (XRPD), optical microscopy and quantitative electron microscopy (SEM and TEM). Correlations with climatic trends and PM10 concentration data were also attempted.The surprising outcome of this work is that, despite the nature of the investigated site, the amount of dispersed asbestos fibers is very low and invariably lower than the theoretical method detection limits of the SEM and TEM techniques for identification and counting of asbestos fibers. The results are compared to the literature data worldwide and an updated model for asbestos fibers dispersion in ambient environments is proposed.     

A novel approach for characterization of polycyclic aromatic hydrocarbon (PAH) pollution patterns in sediments from Guanabara Bay, Rio de Janeiro, Brazil

A novel multivariate method based on principal component analysis of pre-processed sections of chromatograms is used to characterize the complex PAH pollution patterns in sediments from Guanabara Bay, Brazil. Five distinct sources of 3- to 6-ring PAHs could be revealed. The harbour is the most contaminated site in the bay, its plume stretches in a South West to North East direction and the chemical profile indicates mainly pyrogenic sources mixed with a fraction of high-molecular-weight petrogenic PAHs. Rio São João de Meriti is the second largest source of PAHs, and introduces mainly a fraction of low-molecular-weight petrogenic PAHs from the western region of Rio de Janeiro. The sites close to the ruptured pipeline at the Duque de Caxias Refinery show a distinctive pollution pattern indicating a heavy petroleum fraction. The method also led to the identification of new potential indicator ratios also involving coeluting peaks (e.g., triphenylene and chrysene).     

Fungitoxicity of lyophilized and spray-dried garlic extracts

Among the compounds discussed for anti-microbial and anti-fungal use allicin (allylthiosulfinate, diallyl disulfide-S-monoxide), an active ingredient of garlic, has attracted considerable attention. The objective of this study is to determine the antifungal activity of a local garlic ecotype (Voghiera) extracts against different pathogens. Primary screening was carried out by the agar plates technique using ethanol garlic extract at four final concentrations against the following organisms: Alternaria alternata, Aspergillus spp., Colletotrichum acutatum, Didymella bryoniae, Fusarium culmorum, Fusarium avenaceum, Fusarium gramineareum, Gliocladium roseum 47, Pythium splendens, Rhizoctonia solani, Sclerotium rolfsii, Stemphylium vesicarium, Trichoderma longibranchiatum, and Botrytis cinerea. Secondary screening was carried out using a lyophilized and a spray-dried preparation at different concentrations against the organisms selected for the high inhibition garlic effect in the primary screening and compared with the commercial fungicides mancozeb and iprodione. The best results were observed for the spray-dried garlic compound that showed a good fungicidal activity at the concentration of 1.5 g/10 mL while lyophilized garlic at the same concentration exhibited less inhibition activity against the four fungi analyzed in the second screening.     

Assessment of Ni accumulation capability by fungi for a possible approach to remove metals from soils and waters

ABSTRACT

Abandoned industrial sites and mines may constitute possible hazards for surrounding environment due to the presence of toxic compounds that may contaminate soils and waters. The possibility to remove metal contaminants, specifically nickel (Ni), by means of fungi was presented exploiting a set of fungal strains isolated from a Ligurian dismissed mine. The achieved results demonstrate the high Ni(II) tolerance, up to 500 mg Ni l^?1, and removal capability of a Trichoderma harzianum strain. This latter hyperaccumulates up to 11,000 mg Ni kg^?1, suggesting its possible use in a bioremediation protocol able to provide a sustainable reclamation of broad contaminated areas.     

Novel two-step vapor-phase synthesis of UV–Vis light active Fe2O3/WO3 nanocomposites for phenol degradation

Supported Fe₂O₃/WO₃ nanocomposites were fabricated by an original vapor phase approach, involving the chemical vapor deposition (CVD) of Fe₂O₃ on Ti sheets and the subsequent radio frequency (RF)-sputtering of WO₃. Particular attention was dedicated to the control of the W/Fe ratio, in order to tailor the composition of the resulting materials. The target systems were analyzed by the joint use of complementary techniques, that is, X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), and optical absorption spectroscopy. The results showed the uniform decoration of α-Fe₂O₃ (hematite) globular particles by tiny WO₃ aggregates, whose content could be controlled by modulations of the sole sputtering time. The photocatalytic degradation of phenol in the liquid phase was selected as a test reaction for a preliminary investigation of the system behavior in wastewater treatment applications. The system activity under both UV and Vis light illumination may open doors for further material optimization in view of real-world end-uses.