Effect of sewage sludge content on gas quality and solid residues produced by cogasification in an updraft gasifier

In the present work, the gasification with air of dehydrated sewage sludge (SS) with 20wt.% moisture mixed with conventional woody biomass was investigated using a pilot fixed-bed updraft gasifier. Attention was focused on the effect of the SS content on the gasification performance and on the environmental impact of the process. The results showed that it is possible to co-gasify SS with wood pellets (WPs) in updraft fixed-bed gasification installations. However, at high content of sewage sludge the gasification process can become instable because of the very high ash content and low ash fusion temperatures of SS. At an equivalent ratio of 0.25, compared with wood pellets gasification, the addition of sewage sludge led to a reduction of gas yield in favor of an increase of condensate production with consequent cold gas efficiency decrease. Low concentrations of dioxins/furans and PAHs were measured in the gas produced by SS gasification, well below the limiting values for the exhaust gaseous emissions. NH(3), HCl and HF contents were very low because most of these compounds were retained in the wet scrubber systems. On the other hand, high H(2)S levels were measured due to high sulfur content of SS. Heavy metals supplied with the feedstocks were mostly retained in gasification solid residues. The leachability tests performed according to European regulations showed that metals leachability was within the limits for landfilling inert residues. On the other hand, sulfate and chloride releases were found to comply with the limits for non-hazardous residues.     

Blood biomonitoring of metals in subjects living near abandoned mining and active industrial areas

A human blood biomonitoring campaign to detect the environmental exposure to metals (Cd, Cu, Cr, Mn, Pb and Zn) in 265 subjects was performed in the South-Western part of Sardinia (an Italian island) that is a particular area with a great history of coal and metal mining (Pb/Zn mainly) activities and large industrial structures (as metallurgy). Subjects living near the industrial plant area had geometric means (GM) of blood Cd (0.79 μg/l), Cu (971 μg/l), Mn (12.2 μg/l), and Pb (55.7 μg/l) significantly higher than controls (Cd, 0.47 μg/l; Cu, 900 μg/l; Mn 9.98 μg/l; Pb, 26.5 μg/l) and than people living nearby the past mining sites. Subjects living next to one dismissed mine were statistically higher in blood Cu (GM, 1,022 μg/l) and Pb (GM, 41.4 μg/l) concentrations than controls. No differences were observed in people living in the different mining sites, and this might be related to the decennial disclosure of mines and the adoption of environmental remediation programmes. Some interindividual variables influenced blood biomonitoring data, as smoke and age for Cd, gender for Cu, age, sex and alcohol for Pb, and age for Zn. Moreover, blood metal levels of the whole population were similar to reference values representative of the Sardinian population and acceptably safe according to currently available health guidelines.     

TEQ(S) and body burden for PCDDs, PCDFs, and dioxin-like PCBs in human adipose tissue

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), mono-ortho and non-ortho polychlorinated biphenyls (dioxin-like PCBs) were determined in samples of human fat tissue from nine Italian obese patients. The toxicity equivalent (TEQ) values ranged from 9 to 25pgTEQg(-1) lipid (WHO-TEF values, 2005 [Van den Berg, M., Birnbaum, L.S., Denison, M., De Vito, M., Farland, W., Feeley, M., Fiedler, H., Hakansson, H., Hanberg, A., Haws, L., Rose, M., Safe, S., Schrenk, D., Tohyama, C., Tritscher, A., Tuomisto, J., Tysklind, M., Walker, N., Peterson, R.E., 2006. The 2005 World Health Organization reevaluation of human and mammalian Toxic Equivalency Factors for dioxins and dioxin-like compounds. Toxicol. Sci. 93, 223-241]), the contribution of dioxin-like PCBs was more than 30% of the total TEQ values. The obese body burdens varied from 6 to 11ngTEQkg(-1) body weight (BW), exceeding the estimated steady-state body burden 5ngTEQkg(-1) BW, based on lipid adjusted serum concentrations from several populations in the mid-1990s, calculated in the risk assessment US EPA document.     

Adsorption of nutrients and cadmium by different minerals: experimental studies and modelling

This work analyses cadmium sorption by natural vermiculite, zeolite, and pumice, which have been recently considered for their potential use in remediation of contaminated soils. Batch experiments were performed to investigate the interactions between the mineral surfaces and the main nutritive cations of Hoagland solution. In addition to their ameliorative effect of reducing metal mobility, these minerals are able to interact to different extents with various components of the nutrient solution and can change the availability of essential nutrients in solution. Therefore, the minerals were also exposed to a range of cadmium doses to compare their different affinities for this element and to analyse the cadmium–nutrient interactions. The results showed that the nutrient solution composition was significantly modified by contact with zeolite and vermiculite, and to a minor extent with pumice. The ionic equilibrium between the solid and aqueous phases was attained at several time points depending on the cation. Ammonium and potassium ions were almost entirely absorbed by zeolite, while in vermiculite endogenous magnesium ions were exchanged with the liquid phase calcium ions. The amount of cadmium adsorbed on mineral surfaces equilibrated with the nutrient solution showed the following sequence zeolite>vermiculite>pumice, and the cation concentrations of the fluid phase were sensitive to cadmium addition.     

Environmental and biological monitoring of iridium in the city of Rome

The use of iridium in the latest catalytic converters to further reduce nitrogen oxide emission in the exhaust of lean-burn engines could result in increased atmospheric levels of this element in high-density vehicle traffic areas. The objective of this study is to assess environmental Ir pollution and its urinary levels in workers and an urban control group. Environmental monitoring inside a tram consisted in air samplings of total suspended particles (TSP), PM10 and PM2.5 carried out during November 2005. Urinary Ir levels were evaluated in 64 municipal tram drivers and in 58 administrative employees as controls. Quantification of Ir in air samples and urine was performed by means of Sector Field Inductively Coupled Plasma Mass Spectrometry. Means+/-standard deviation of Ir levels in TSP, in PM10 and PM2.5 fractions were 1.43+/-1.66, 0.44+/-0.27 and 0.36+/-0.19 pg m(-3), respectively. No statistically significant differences were observed among urinary Ir values in the exposed subjects and control group. The Ir levels in Rome air are still sufficiently low, even if the increased use of new Ir-based catalysts could be of some concern in the near future. The results of our study are of interest as they are a first attempt to explore airborne levels and urinary concentrations of Ir in an urban context at medium-high density of vehicle traffic. Particular attention should be given to the fact that Ir was found in the finest dust particles as the effects of fine particles containing Ir have not yet been studied.     

Remote sensing water observation for supporting Lake Victoria weed management

This paper aims to assess the suitability of remote sensing for enhancing the management of water body resources and for providing an inexpensive way to gather, on a wide area, weed infestation extent and optical parameter linked to the water body status. Remotely sensed satellite images and ancillary ground true data were used to produce land cover maps, trough classification techniques, and water compounds maps, applying radiative transfer models. The study proposed within the framework of the cooperation between Italian Foreign Affair Ministry (through the University of Rome) and Kenyan Authorities has been carried out on the Kenyan part of the Lake Victoria. This lake is one of the largest freshwater bodies of the world where, over the last few years environmental challenges and human impact have perturbed the ecological balance affecting the biodiversity. The objective of this research study is to define the thematic products, retrievable from satellite images, like weed abundance maps and water compound concentrations. These products, if provided with an appropriate time frequency, are useful to identify the preconditions for the occurrence of hazard events like abnormal macrophyte proliferation and to develop an up-to-date decision support system devoted to an apprised territory, environment and resource management.     

Pedestrian exposure to size-resolved particles in Milan

Measurement campaigns for airborne particles along a pedestrian route in the city center of Milan were performed by means of a portable instrument consisting of an optical particle counter and a global positioning system (GPS) signal receiver. Based on the size-resolved particle number concentration data and on proper density factors experimentally determined for Milan urban area, the mass concentrations were calculated in terms of particulate matter with aerodynamic diameters < or =10 microm (PM10), < or =2.5 pm (PM2.5), and < or =1 microm (PM1). Besides directly measuring the personal exposure to PM throughout the route, the measurement campaigns pointed out small spatial and temporal variations of the concentration ranges in the different urban microenvironments visited along the route as well as very peculiar features of the particles levels in the underground subway. These findings suggested that the personal exposure of pedestrians in the city center could be estimated by simply taking into account the exposure at the open air and in the subway. The comparison between measured and calculated exposures according to the microenvironment-based estimation results in reasonable accordance, even though the estimations tend to slightly underestimate (12%) the actual measured exposure.     

Soil carbon dynamics in a Mediterranean forest during the Kyoto Protocol commitment periods

The purpose of the present work is to asses the possibility of detecting changes in soil organic carbon (SOC) at the end of the 5-years of the first Commitment Period (CP) of the Kyoto Protocol of the United Nation’s Framework Convention on Climate Change (1 January, 2008–31 December, 2012), by both direct measurement and the use of an opportunely evaluated SOC model, CENTURY. The investigated soil is young, developed since 28 years on virtually C-free spoil banks and under the influence of two managed forest stands, one a mix of English oak (Quercus robur L.) and Italian alder (Alnus cordata Loisel.) and the other pure English oak. The SOC stock of either stand was monitored since the time the stands were planted in 1981, and it was used together with other parameters for the model evaluation, while the future projections for the end of the first (2012) and second (2017) CP were made according to two extreme IPCC climatic scenarios: A1F1, the most dramatic, and B2, among the less impacting. Direct SOC measurements performed at the beginning and at the end of a time frame equivalent to a commitment period (2004–2008) had not shown significant variations in either stands. Compared to the 2008 SOC stock, in both stands the model shows variations at the end of the first CP from 0.7 to 1.8 Mg C ha⁻¹ for the A1F1 scenario and from 0.3 to 1.7 Mg C ha⁻¹ for the B2. These variations are within the standard deviations of the C stocks measured in 2008. On the contrary, at the end of the second CP, the modelled SOC increments range from 2.5 to 3.6 Mg C ha⁻¹ (A1F1) or from 1.9 to 3.4 Mg C ha⁻¹ (B2), indicating the possibility to detect the SOC changes by direct measurement, since the values well agree with the minimum detectable variation estimated for both sites in 3.3–4.5 Mg C ha⁻¹. This work shows that SOC stock changes measured directly in the field can be minimal at the end of both CPs, and that CENTURY well simulates the SOC dynamics of the stands. The use of such a model, validated at long-term experimental sites, hence represents an effective tool for estimating future changes in SOC amounts in support of direct measurements when a short period of time, such as the CP, is considered.     

PCDD/F and dioxin-like PCB profiles in soils amended with sewage sludge,compost, farmyard manure,and mineral fertilizer since 1962

Background, aim, and scope  

Biowaste contains compounds of agricultural value such as organic carbon, nutrients, and trace elements and can partially replace mineral fertilizer (MIN) and improve the physical properties of the soil. However, the obvious benefits of land spreading need to be carefully evaluated against potential adverse effects on the environment and human health. Environmental contamination resulting from biowaste application is one of the key variables when assessing cost/benefits. This study provides data on the resulting concentration of polychlorinated dibenzodioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in the soil column as a result of the different types of fertilizers.     

Electrochemical advanced oxidation and biological processes for wastewater treatment: a review of the combined approaches

As pollution becomes one of the biggest environmental challenges of the twenty-first century, pollution of water threatens the very existence of humanity, making immediate action a priority. The most persistent and hazardous pollutants come from industrial and agricultural activities; therefore, effective treatment of this wastewater prior to discharge into the natural environment is the solution. Advanced oxidation processes (AOPs) have caused increased interest due to their ability to degrade hazardous substances in contrast to other methods, which mainly only transfer pollution from wastewater to sludge, a membrane filter, or an adsorbent. Among a great variety of different AOPs, a group of electrochemical advanced oxidation processes (EAOPs), including electro-Fenton, is emerging as an environmental-friendly and effective treatment process for the destruction of persistent hazardous contaminants. The only concern that slows down a large-scale implementation is energy consumption and related investment and operational costs. A combination of EAOPs with biological treatment is an interesting solution. In such a synergetic way, removal efficiency is maximized, while minimizing operational costs. The goal of this review is to present cutting-edge research for treatment of three common and problematic pollutants and effluents: dyes and textile wastewater, olive processing wastewater, and pharmaceuticals and hospital wastewater. Each of these types is regarded in terms of recent scientific research on individual electrochemical, individual biological and a combined synergetic treatment.