The dynamic changes of arsenic biotransformation and bioaccumulation in muscle of freshwater food fish crucian carp during chronic dietborne exposure

Dietary uptake is the major way that inorganic arsenic (iAs) enters into benthic fish; however, the metabolic process of dietborne iAs in fish muscle following chronic exposure remains unclear. This was a 40-day study on chronic dietborne iAs [arsenite (AsIII) and arsenate (AsV)] exposure in the benthic freshwater food fish, the crucian carp (Carassius auratus), which determined the temporal profiles of iAs metabolism and toxicokinetics during exposure. We found that an adaptive response occurred in the fish body after iAs dietary exposure, which was associated with decreased As accumulation and increased As transformation into a non-toxic As form (arsenobetaine). The bioavailability of dietary AsIII was lower than that of AsV, probably because AsIII has a lower ability to pass through fish tissues. Dietary AsV exhibited a high potential for transformation into AsIII species, which then accumulated in fish muscle. The largely produced AsIII considered more toxic at the earlier stage of AsV exposure should attract sufficient attention to human exposure assessment. Therefore, the pristine As species and exposure duration had significant effects on As bioaccumulation and biotransformation in fish. The behavior determined for dietborne arsenic in food fish is crucial for not only arsenic ecotoxicology but also food safety.     

Lactational exposure to phthalates in Southern Italy

BackgroundPhthalates, reproductive toxicants in animals, are synthetic chemicals with ubiquitous human exposures because of their extensive use, with potential detrimental health effects. Infants are considered to represent a population at increased risk, as they are exposed early in life to several different sources of exposure to phthalates.Objectives and methodsLittle information exists on phthalate exposure through breast milk from different geographic areas. By means of a LC/LC–MS/MS method we tested the presence of several different phthalate metabolites in breast milk from 62 healthy mothers living in Southern Italy.ResultsThe simple monoesters mono-isobutyl phthalate (MiBP) (median 18.8 μg/l) and mono(2-ethylhexyl) phthalate (MEHP) (median 8.4 μg/l) were present in all milk samples, whereas mono-n-butyl phthalate (MnBP) (median 1.5 μg/l) and mono-benzyl phthalate (MBzP) (median < 0.3 μg/l) were found in 64.5% and 43.5% of the samples, respectively. Among the oxidative metabolites of DEHP and DiNP only mono(2-ethyl-5-carboxypentyl) phthalate (5cx-MEPP) and monoisononyl phthalate with one hydroxyl group (OH-MiNP) were detectable in one and 13 samples (21%), respectively.ConclusionsThese findings indicate that exposure to phthalates through breast milk in Southern Italian infants is comparable to that of other countries, thus confirming that human milk may represent an additional potential source of phthalate exposure in a population at increased risk. However, different milk concentrations of MiBP may suggest a different pattern of usage of di-iso-butyl phthalate in Europe, as compared to USA, whereas for the first time, we detected an oxidative DiNP metabolite, whose significance remains unclear.     

微波无极紫外光催化-内电解协同降解活性艳红X-3B

采用微波无极紫外光源,以活性炭作为光催化剂TiO2的载体,与外加铁屑构成内电解反应,处理活性艳红X-3B模拟废水.实验结果表明,微波无极紫外光催化-内电解法对活性艳红X-3B的降解速率是微波无极紫外光催化和微波-内电解法单独作用时降解速率之和的2倍.在活性艳红X-3B模拟废水初始pH为7、空气曝气量为0.50 L/min、铁屑加入量为5 g/L、反应温度为40～45℃的最佳条件下,微波无极紫外光催化-内电解法的活性艳红X-3B模拟废水色度去除率达100%,TOC和可吸附有机卤化物的去除率分别为69.5%和81.8%.     

塔山水库蓝藻暴发的成因及控制

简述了塔山水库蓝藻暴发的过程及成因。指出 ,由于水库的营养物质增多、水质恶化 ,在不利的水文、气象 (高温、光照充足、微风 )等条件下 ,导致蓝藻暴发。提出了相应的控制对策     

Migratory crustaceans as biomonitors of metal pollution in their nursery areas. The Lesina lagoon (SE Italy) as a case study

Lichens collected in an unpolluted forest (background) in November 2004, transplanted at 41 sampling sites along the Madina-Tetteh Quarshie road, retrieved in February 2005 and analysed were found to contain higher concentrations of Manganese (Mn), Vanadium (V), lead, Cadmium (Cd), Chromium (Cr) and Nickel (Ni) than in the background area. Observations showed that of all the heavy metals studied, Manganese concentrations were highest at all sampling points with maximum values around a traffic light, an intersection and car fitting/mechanic workshops. Significant correlations were found between Ni and Mn, Mn and Cr and Mn and V. Statistical analysis also revealed a relatively even dispersion of the studied elements on the eastern side of the road than on the western side.     

Indoor air quality in university environments

This study evaluates the airborne microflora in research laboratories of the University of Chieti (Italy). A quali-quantitative evaluation of the index microbial air contamination was performed using the settle plate method. The microbial air contamination was evaluated during 6 months in three university buildings (A, B, and C). Nutrient agar plates were exposed, monthly, for 1 h at the morning and the afternoon to evaluate the colony forming units per plate per hour. Together with the quantitative analysis, the most frequent bacterial and fungal colonies isolated were also characterized. Moreover, in each sampling, the number of the occupants in each room was recorded to evaluate a possible relationship with the microbial pollution. The microbial concentration was always within the limit values defined for these environments. Buildings A and C displayed a seasonal fluctuation of airborne microflora with the increase in microbial concentration in the warmer season (April to June) in respect to the colder period (October to December). The most common microorganisms detected in the indoor air of the examined buildings were Gram-positive bacteria, belonged to the genera Staphylococcus, Bacillus, and Actinomyces. Data presented here underline the useful monitoring of the research university laboratories also emphasizing the effectiveness of the settle plate method.     

Challenges in quantifying biosphere-atmosphere exchange of nitrogen species

Recent research in nitrogen exchange with the atmosphere has separated research communities according to N form. The integrated perspective needed to quantify the net effect of N on greenhouse-gas balance is being addressed by the NitroEurope Integrated Project (NEU). Recent advances have depended on improved methodologies, while ongoing challenges include gas-aerosol interactions, organic nitrogen and N(2) fluxes. The NEU strategy applies a 3-tier Flux Network together with a Manipulation Network of global-change experiments, linked by common protocols to facilitate model application. Substantial progress has been made in modelling N fluxes, especially for N(2)O, NO and bi-directional NH(3) exchange. Landscape analysis represents an emerging challenge to address the spatial interactions between farms, fields, ecosystems, catchments and air dispersion/deposition. European up-scaling of N fluxes is highly uncertain and a key priority is for better data on agricultural practices. Finally, attention is needed to develop N flux verification procedures to assess compliance with international protocols.     

Assessment of urban sustainability efficiency based on general data envelopment analysis: a case study of two cities in western and eastern China

Sustainable urban development focuses on enhancing urban well-being, while also balancing the demands of urban social and economic development, natural resource consumption, and environmental pollution. This work used general data envelopment analysis to assess the urban sustainability efficiency (USE) and sustainability potential (SP) in Lanzhou and Xiamen, two cities that are characteristic of urban areas in western and eastern China. The assessment indicator system included important natural and urban welfare factors as input and output indices, respectively. The results showed that overall urban sustainability efficiency increased in Lanzhou and Xiamen from 1985 to 2010, but that the sustainability of natural resources clearly decreased. The urban sustainability efficiency of Xiamen was higher than that of Lanzhou, and the sustainability potential of Xiamen was lower than that of Lanzhou; this indicates that Xiamen performed better in terms of urban sustainable development. The urban sustainability efficiency in Xiamen has increased with increasing urban population, and the rate and scale of economic development have been higher than in Lanzhou. The assessment and analysis performed in this study show that cities with different natural resources and development characteristics have different forms, patterns, and trajectories of sustainable development.     

Direct measurements of the drag force over aligned arrays of cubes exposed to boundary-layer flows

Wind tunnel measurements of the total drag force for aligned arrays of cubes exposed to two different boundary-layer flows at three flow velocities are discussed. The drag force for eight different building packing densities λ _p (from 0.028 to 1) is measured with a standard load cell generating a novel dataset. Different λ _p are reproduced by increasing the number of buildings on the same lot area; this represents a real situation that an urban planner is faced with when a lot area of a given (fixed) size is allocated to the development of new built areas. It is assumed that the surrounding terrain is uniform and there is a transition from a given roughness (smooth) to a new roughness (rough). The approaching flow will adjust itself over the new surface within a distance that in general may be larger than the horizontal length covered by the array. We investigate the region where the flow adjustment occurs. The wide range of packing densities allowed us to analyse in detail the evolution of the drag force. The drag force increases with increasing packing densities until it reaches a maximum at an intermediate packing density (λ _p  = 0.25 in our case) followed by a slight decrease at larger packing densities. The value of the drag force depends on the flow adjustment along the array which is evaluated by introducing the parameter “drag area” to retrieve information about the drag distribution at different λ _p . Results clearly suggest a change of the distribution of the drag force, which is found to be relatively uniform at low packing densities, while most of the force acts on first rows of the arrays at large packing densities. The drag area constitutes the basis for the formulation of a new adjustment length scale defined as the ratio between the volume of the air within the array and the drag area. The proposed adjustment length scale automatically takes into account the change in drag distribution along the array for a better parameterization of urban effects in dispersion models.     

Removal of heavy metal ions from wastewaters using dendrimer-functionalized multi-walled carbon nanotubes

Dendrimer-functionalized multi-walled carbon nanotubes (MWCNT) for heavy metal ion removal from wastewaters were developed. Triazole dendrimers (TD) were built directly onto the carbon nanotube surface by successive click chemistry reactions affording the zero- and first-generation dendrimer-functionalized MWCNT (MWCNT-TD1 and MWCNT-TD2). The Moedritzer-Irani reaction carried out on the amino groups present on the MWCNT-TD2 sample gave the corresponding α-aminophosphonate nanosystem MWCNT-TD2P. Both MWCNT-TD2 and MWCNT-TD2P nanosystems have been characterized by physical, chemical, and morphological analyses. Their chelating abilities towards the toxic metal ions Pb²⁺, Hg²⁺, and Ni²⁺ and the harmless Ca²⁺ ion have been experimentally evaluated in the two different sets of experiments and at the salt concentrations of 1 mg/mL or 1 μg/mL by inductively coupled plasma mass spectrometry (ICP-MS). The results of these studies pointed out the interesting chelating behavior for the phosphonated nanosystem towards the Hg²⁺ ion. The complexation mode of the best chelating system MWCNT-TD2P with mercury was investigated through density functional theory (DFT) calculations, suggesting a chelation mechanism involving the two oxygen atoms of the phosphate group. The synthesized dendrimers, supported on the multi-walled carbon nanotubes, have shown the potential to be used for the selective toxic metal ion removal and recovery.