Indoor and outdoor BTX levels in Barcelona City metropolitan area and Catalan rural areas

Five aromatic hydrocarbons (benzene, toluene, and three isomeric xylenes) were monitored in indoor and outdoor air of 7 public buildings and 54 private homes, located in Barcelona City metropolitan area and in several rural areas of Catalonia. The sampling was carried out over four periods: spring-summer and winter of 2000, and summer and winter of 2001. Passive ORSA 5 Dra¨ger samplers were used for benzene, toluene, and xylenes (BTX) adsorption. BTX were extracted with carbon disulphide and analysed using ...     

Consequences of raising the speed limit

Two methods were used to assess the potential impact of increased speed limits on highway fatalities. These were: (a) a method used by National Safety Council (NSC) in estimating the causes of decreased motor vehicles in the 1970s and (b) a method used by the National Research Council, Transportation Research Board (TRB) in reporting on 10 years of experience with the 55 mph speed limit. Applying the NSC method to 1984 fatality data resulted in estimated increases of 200 to 700 deaths per year on rural interstates depending on how much the speed limit was raised. Using the TRB method resulted in estimated increases of 300 to 450 deaths per year if each state returned to pre-1974 speed limits.     

Identifying water resources management strategies in adaptation to climate change under uncertainty

In this study, an integrated simulation-based allocation modeling system (ISAMS) is developed for identifying water resources management strategies in response to climate change. The ISAMS incorporates global climate models (GCMs), a semi-distributed land use-based runoff process (SLURP) model, and a multistage interval-stochastic programming (MISP) approach within a general framework. The ISAMS can not only handle uncertainties expressed as probability distributions and interval values but also reveal climate change impacts on water resources allocation under different projections of GCMs. The ISAMS is then applied to the Kaidu-kongque watershed with cold arid characteristics in the Tarim River Basin (the largest inland watershed basin in China) for demonstrating its efficiency. Results reveal that different climate change models corresponding to various projections (e.g., precipitation and temperature) would lead to changed water resources allocation patterns. Variations in water availability and demand due to uncertainties could result in different water allocation targets and shortages. A variety of decision alternatives about water allocations adaptive to climate change are generated under combinations of different global climate models and ecological water release plans. These findings indicate that understanding the uncertainties in water resources system, building adaptive methods for generating sustainable water allocation patterns, and taking actions for mitigating water shortage problems are key adaptation strategies responding to climate change.     

Degradation of three phenylurea herbicides (chlortoluron, isoproturon and diuron) by micromycetes isolated from soil

As part of a study conducted on the fate of xenobiotics in the environment, a selection of 100 strains of micromycetes (Ascomycetes, Basidiomycetes and Yeasts) have been cultivated in liquid synthetic medium with 3 phenylurea herbicides: chlortoluron and isoproturon (100mg L-1) and diuron (20mg L-1). While 17 strains depleted isoproturon over 50% only 4 depleted diuron and 2 chlortoluron at the same level. The best results were obtained with Bjerkandera adusta and Oxysporus sp which were the most efficient towards the 3 substrates. After 2 weeks Bjerkandera adusta depleted chlortoluron 98%, diuron 92% and isoproturon 88%.     

Nitrogen oxides from waste incineration: control by selective non-catalytic reduction

An experimental study of the selective non-catalytic reduction (SNCR) process was carried out to determine the efficiency of NOx removal and NH3 mass balance, the NOx reducing reagent used. Experimental tests were conducted on a full-scale SNCR system installed in a hospital waste incineration plant. Anhydrous NH3 was injected at the boiler entrance for NOx removal. Ammonia was analyzed after each flue-gas treatment unit in order to establish its mass balance and NH3 slip in the stack gas was monitored as well. The effective fraction of NH3 for the thermal NOx reduction was calculated from measured values of injected and residual NH3. Results show that a NOx reduction efficiency in the range of 46.7-76.7% is possible at a NH3/NO molar ratio of 0.9-1.5. The fraction of NH3 used in NOx removal was found to decrease with rising NH3/NO molar ratio. The NH3 slip in the stack gas was very low, below permitted limits, even at the higher NH3 dosages used. No direct correlation was found between the NH3/NO molar ratio and the NH3 slip in the stack gas since the major part of the residual NH3 was converted into ammonium salts in the dry scrubbing reactor and subsequently collected in the fabric filter. Moreover, another fraction of NH3 was dissolved in the scrubbing liquor.     

Boreal bog plants: nitrogen sources and uptake of recently deposited nitrogen

The main goals of this study were to determine the delta15N signature of quantitatively important boreal bog plants as basis for discussing their N sources, and to assess the effects of five different 3 year N treatments (i.e. 0, 5, 10, 20 and 40 kg N ha(-1) year(-1)) on the bog plants and surface peat at different depths (i.e. 0, 5, 10, 20 and 40 cm) by using 15N as tracer. Plants and peat were analyzed for N concentration, 15N natural abundance and 15N at.%. From the results we draw three main conclusions: First, the relative importance of different N sources is species-specific among bog plants. Second, an annual addition of 5 kg N ha(-1) year(-1) was sufficient to significantly increase the N concentration in Sphagnum mosses, liverworts and shallow rooted vascular plants, and an annual addition of 40 kg N ha(-1) year(-1) during 3 years was not sufficient to increase the N concentration in deep rooted plants, although the 15N content increased continuously, indicating a possible longer term effect. Third, an annual addition of 40 kg N ha(-1) year(-1) during 3 years increased the N content in surface peat at depths of 5 and 10 cm, but not at depths of 20 and 40 cm, indicating the capacity of the living Sphagnum mosses and the surface peat to take up deposited N, and thereby function as a filter.     

Dissolved organic matter fractions formed during composting of winery and distillery residues: evaluation of the process by fluorescence excitation-emission matrix

The aim of the present paper is to assess the maturity degree reached by different samples of several mixtures from winery and distillery residues composted using the Rutgers composting system, by means of excitation-emission matrix (EEM) fluorescence spectroscopy. The composts were sampled once a week for about 200d. EEM spectra indicate the presence of different fluorophores. The fluorescence intensities of these peaks show trends related to the maturity of the composting samples selected. The "contour density" of EEM maps is strongly modified through time. We have used the quantitative method of fluorescence regional integration (FRI). The EEMs were delineated into five excitation-emission regions. The degree of compost maturity could be correlated with the percentage of the volumetric integration under the EEM within each region. Further refinement of these techniques should provide a relatively rapid method for assessing the suitability of the compost to soil application.     

Quantifying road dust resuspension in urban environment by Multilinear Engine: A comparison with PMF2

Atmospheric PM pollution from traffic comprises not only direct emissions but also non-exhaust emissions because resuspension of road dust that can produce high human exposure to heavy metals, metalloids, and mineral matter. A key task for establishing mitigation or preventive measures is estimating the contribution of road dust resuspension to the atmospheric PM mixture. Several source apportionment studies, applying receptor modeling at urban background sites, have shown the difficulty in identifying a road dust source separately from other mineral sources or vehicular exhausts. The Multilinear Engine (ME-2) is a computer program that can solve the Positive Matrix Factorization (PMF) problem. ME-2 uses a programming language permitting the solution to be guided toward some possible targets that can be derived from a priori knowledge of sources (chemical profile, ratios, etc.). This feature makes it especially suitable for source apportionment studies where partial knowledge of the sources is available.In the present study ME-2 was applied to data from an urban background site of Barcelona (Spain) to quantify the contribution of road dust resuspension to PM₁₀ and PM_2.5 concentrations. Given that recently the emission profile of local resuspended road dust was obtained (Amato, F., Pandolfi, M., Viana, M., Querol, X., Alastuey, A., Moreno, T., 2009. Spatial and chemical patterns of PM₁₀ in road dust deposited in urban environment. Atmospheric Environment 43 (9), 1650–1659), such a priori information was introduced in the model as auxiliary terms of the object function to be minimized by the implementation of the so-called “pulling equations”.ME-2 permitted to enhance the basic PMF solution (obtained by PMF2) identifying, beside the seven sources of PMF2, the road dust source which accounted for 6.9 μg m^?3 (17%) in PM₁₀, 2.2 μg m^?3 (8%) of PM_2.5 and 0.3 μg m^?3 (2%) of PM₁. This reveals that resuspension was responsible of the 37%, 15% and 3% of total traffic emissions respectively in PM₁₀, PM_2.5 and PM₁. Therefore the overall traffic contribution resulted in 18 μg m^?3 (46%) in PM₁₀, 14 μg m^?3 (51%) in PM_2.5 and 8 μg m^?3 (48%) in PM₁. In PMF2 this mass explained by road dust resuspension was redistributed among the rest of sources, increasing mostly the mineral, secondary nitrate and aged sea salt contributions.     

Comparative study of extraction methods for the determination of PAHs from contaminated soils and sediments

The following four methods were compared on the extraction efficiency of 16 EPA (US Environmental Protection Agency) polycyclic aromatic hydrocarbons (PAHs): German method of the Verband Deutscher Landwirtschaftlicher Untersuchungs und Forschungsanstalten (VDLUFA), two methods of the International Organization for Standardization using shaking (ISO A) and Soxhlet extraction (ISO B) and an ultrasonic method. Recovery rates of 16 PAHs were determined in two soils. Extraction efficiency was evaluated in five soils and three sediments. Effect of drying soils and sediments on extraction efficiency was tested using the VDLUFA and the ultrasonic methods. Our study shows that the number of aromatic rings, rather than extraction procedures, significantly influenced recovery rates of individual PAHs. No significant differences in extraction efficiency of the four methods were observed for less polluted samples. For highly polluted soils, extraction efficiency decreased in the following order: VDLUFA method > ISO A > ultrasonic method > ISO B. Influence of soil moisture on extraction efficiency depended to some extent on both solvent used and content of PAHs in samples. A mixture of dichloromethane/acetone (5:1) is recommended for PAH extraction from moist samples when the ultrasonic method is used.