A non-aqueous phase liquid (NAPL) containing dissolved naphthalene or phenol was used to simulate water insoluble contaminants which are produced during the processing of oil sands. Mass transfer and biodegradation of organic contaminants in the aqueous phase were studied in a baffled roller bioreactor. Mass transfer of both naphthalene and phenol from NAPL into the aqueous phase was completed in less than 60 min, by which time naphthalene reached its saturation concentration in the aqueous phase and phenol was completely transferred into the aqueous phase. Pseudomonas putida (ATCC 17484) was subsequently used in biodegradation experiments in the baffled bioreactor containing the model NAPL contaminant. The optimum loading of NAPL for biodegradation of naphthalene at 500 mg/L was found to be 40%. High biodegradation rates (136.4 mg/L h for naphthalene and 13.2 mg/L h for phenol based on the working volume of the bioreactor) were achieved. In the case of simultaneous biodegradation of naphthalene and phenol, the highest total biodegradation rate of 102.6 mg/L h was achieved. 相似文献
Agricultural wastewater treatment is important for maintaining water quality, and constructed wetlands (CW) can be an effective treatment option. However, some of the N that is removed during treatment can be volatilized to the atmosphere as ammonia (NH(3)). This removal pathway is not preferred because it negatively impacts air quality. The objective of this study was to assess NH(3) volatilization from surface flow (SF) and subsurface flow (SSF) CWs. Six CWs (3 SF and 3 SSF; 6.6 m(2) each) were loaded with dairy wastewater ( approximately 300 mg L(-1) total ammoniacal nitrogen, TAN = NH(3)-N + NH(4)(+)-N) in Nova Scotia, Canada. From June through September 2006, volatilization of NH(3) during 12 or 24 h periods was measured using steady-state chambers. No differences (p > 0.1) between daytime and nighttime fluxes were observed, presumably due in part to the constant airflow inside the chambers. Changes in emission rates and variability within and between wetland types coincided with changes in the vegetative canopy (Typha latifolia L.) and temperature. In SSF wetlands, the headspace depth also appeared to affect emissions. Overall, NH(3) emissions from SF wetlands were significantly higher than from SSF wetlands. The maximum flux densities were 974 and 289 mg NH(3)-N m(-2) d(-1) for SF and SSF wetlands, respectively. Both wetland types had similar TAN mass removal. On average, volatilization contributed 9 to 44% of TAN removal in SF and 1 to 18% in SSF wetlands. Results suggest volatilization plays a larger role in N removal from SF wetlands. 相似文献
Environmental Science and Pollution Research - Diatoms play an important role as ecological indicators, and some species of diatoms can easily cause water blooms, thereby decreasing the production... 相似文献
The Handix Scientific open-path cavity ringdown spectrometer (OPCRDS) was deployed during summer 2016 in Great Smoky Mountains National Park (GRSM). Extinction coefficients from the relatively new OPCRDS and from a more well-established extinction instrument agreed to within 7%. Aerosol hygroscopic growth (f(RH)) was calculated from the ratio of ambient extinction measured by the OPCRDS to dry extinction measured by a closed-path extinction monitor (Aerodyne’s cavity-attenuated phase shift particulate matter extinction monitor [CAPS PMex]). Derived hygroscopicity (relative humidity [RH] < 95%) from this campaign agreed with data from 1995 at the same site and time of year, which is noteworthy given the decreasing trend for organics and sulfate in the eastern United States. However, maximum f(RH) values in 1995 were less than half as large as those recorded in 2016—possibly due to nephelometer truncation losses in 1995. Two hygroscopicity parameterizations were investigated using high-time-resolution OPCRDS+CAPS PMex data, and the κext model was more accurate than the gamma model. Data from the two ambient optical instruments, the OPCRDS and the open-path nephelometer, generally agreed; however, significant discrepancies between ambient scattering and extinction were observed, apparently driven by a combination of hygroscopic growth effects, which tend to increase nephelometer truncation losses and decrease sensitivity to the wavelength difference between the two instruments as a function of particle size. There was not a statistically significant difference in the mean reconstructed extinction values obtained from the original and the revised IMPROVE (Interagency Monitoring of Protected Visual Environments) equations. On average, IMPROVE reconstructed extinction was ~25% lower than extinction measured by the OPCRDS, which suggests that the IMPROVE equations and 24-hr aerosol data are moderately successful in estimating current haze levels at GRSM. However, this conclusion is limited by the coarse temporal resolution and the low dynamic range of the IMPROVE reconstructed extinction.
Implications: Although light extinction, which is directly related to visibility, is not directly measured in U.S. National Parks, existing IMPROVE protocols can be used to accurately infer visibility for average humidity conditions, but during the large fraction of the year when humidity is above or below average, accuracy is reduced substantially. Furthermore, nephelometers, which are used to assess the accuracy of IMPROVE visibility estimates, may themselves be biased low when humidity is very high. Despite reductions in organic and sulfate particles since the 1990s, hygroscopicity, particles’ affinity for water, appears unchanged, although this conclusion is weakened by the previously mentioned nephelometer limitations. 相似文献
One of the biggest environmental concerns caused by coal-fired power plants is the emission of mercury (Hg), which is toxic metal. To control the emission of Hg from coal-derived flue gas, it is important to understand the behavior and speciation of Hg as well as the interaction between Hg and solid materials in the flue gas stream. In this study, atomic-scale theoretical investigations using density functional theory (DFT) were carried out in conjunction with laboratory-scale experimental studies to investigate the adsorption behavior of Hg on hematite (α-Fe2O3). According to the DFT simulation, the adsorption energy calculation proposes that Hg physisorbs to the α-Fe2O3(0001) surface with an adsorption energy of ?0.278 eV, and the subsequent Bader charge analysis confirms that Hg is slightly oxidized. In addition, Cl introduced to the Hg-adsorbed surface strengthens the Hg stability on the α-Fe2O3(0001) surface, as evidenced by a shortened Hg-surface equilibrium distance. The projected density of states (PDOS) analysis also suggests that Cl enhances the chemical bonding between the surface and the adsorbate, thereby increasing the adsorption strength. In summary, α-Fe2O3 has the ability to adsorb and oxidize Hg, and this reactivity is enhanced in the presence of Cl. For the laboratory-scale experiments, three types of α-Fe2O3 nanoparticles were prepared using the precursors Fe(NO3)3, Fe(ClO4)3, and FeCl3, respectively. The particle shapes varied from diamond to irregular stepped and subrounded, and particle size ranged from 20 to 500 nm depending on the precursor used. The nanoparticles had the highest surface area (84.5 m2/g) due to their highly stepped surface morphology. Packed-bed reactor Hg exposure experiments resulted in this nanoparticles adsorbing more than 300 μg Hg/g. The Hg LIII-edge extended X-ray absorption fine structure spectroscopy also indicated that HgCl2 physisorbed onto the α-Fe2O3 nanoparticles.Implications: Atomic-scale theoretical simulations proposes that Hg physisorbs to the α-Fe2O3(0001) surface with an adsorption energy of ?0.278 eV, and the subsequent Bader charge analysis confirms that Hg is slightly oxidized. In addition, Cl introduced to the Hg-adsorbed surface strengthens the Hg stability on the α-Fe2O3(0001) surface, as evidenced by a shortened Hg-surface equilibrium distance. The PDOS analysis also suggests that Cl enhances the chemical bonding between the surface and the adsorbate, thereby increasing the adsorption strength. Following laboratory-scale experiment of Hg sorption also shows that HgCl2 physisorbs onto α-Fe2O3 nanoparticles which have highly stepped structure. 相似文献