Phosphorus losses through agricultural tile drainage in Nova Scotia, Canada

Tile drainage water from agricultural fields commonly exceeds environmental guidelines for phosphorus (P) in rivers and streams. The loss of P through artificial drainage is spatially and temporally variable, and is related to local factors. This study characterizes variability in total P (TP) and soluble reactive P (SRP) concentrations in weekly drainage samples from 39 agricultural fields in Nova Scotia, Canada, from April 2002 through December 2003. We examined connections between P concentrations and the factors: (i) soil texture; (ii) discharge flow rate; (iii) soil test P (STP); (iv) manure type; and (v) crop cover. Generally, variability between fields and samples was great, and fields with standard deviations exceeding the mean for TP, SRP, and flow rate were 71, 54, and 79%, respectively. It was evident that poultry and swine manure contributed to high STPs, and to constantly high TP concentrations with high proportions of SRP. Concentrations varied from week to week, and particularly in April, May, October, and November when the greatest TP, SRP, and flow rate averages were measured. Mean TP concentrations exceed the USEPA (1994) TP guideline of 0.10 mg L(-1) at 82% of the fields, and periodically concentrations more than 10 times, and occasionally more than 50 times higher than the guideline were found. The proportion of SRP in TP had a tendency to be higher when TP levels were high in coarse textured soils. In Nova Scotia, dairy manure is most often applied on permanent cover crops, which did not show as much P concentration variability as crop rotations. Daily or hourly observation of short-term increases in P concentrations related to the described factors would help to characterize the changes in P concentrations observed during frequent heavy drainage flow events.     

Leaching of copper,chromium and arsenic in a soil of south west Victoria,Australia

The movement of copper, chromium and arsenic originating from samples of the wood preservative Tanalith® through mildly acidic, sandy loam soil was investigated. Small, undisturbed soil cores (of dimensions 15 × 15 × 15 cm) were removed from the topsoil of a paddock adjacent to the Glenelg River in the Western District of Victoria, Australia. The paddock soils were thin (<30cm) greyish brown, mildly acidic, sandy loams with a moderate organic carbon content (2–5%) overlying a limestone cap. Tanalith® was applied to the surface of the cores which were then irrigated with deionised water at approximately 30 mm day^‐1. Copper concentrations in all leachate remained at background levels throughout the experiment, and this element was found to be immobilised in the top 4 cm of the soil. Up to 29% of the applied dose of chromium was detected in the leachate, with breakthrough occurring within 20 days of Tanalith® application. Up to 13% ofthe applied dose ofarsenic was detected in the leachate, although in this case breakthrough was not observed until 25 days after Tanalith® application and leachate concentrations were still rising when the experiment came to a close. Significant concentrations of arsenic and chromium were found in the top 6 cm of the soil profile.     

Conversion or conservation? Understanding wetland change in northwest Costa Rica.

Wetlands are more threatened than any other ecosystem type, with losses exceeding 50% of their original extent worldwide. Despite the small portion of the Earth's surface that they comprise, wetlands contribute significantly to global ecosystem services. In this study, we tested the hypothesis that the location and rate of change in wetland amount in the Tempisque Basin of northwest Costa Rica is predictable from landscape setting. Our results demonstrate that a strong potential exists for developing predictive models of wetland conversion based on an understanding of wetland location and surrounding trends of land use. We found that topography was the single most important predictor of wetland conversion in this area, entraining other conversion processes, and that spatial patterns of wetland loss could consistently be predicted from landscape-level variables. Areas with highest probabilities of conversion were found in the most accessible, non-protected regions of the landscape. While Palo Verde National Park made a substantial contribution to wetland conservation, our results highlight the dependence of lower-lying protected areas on upland processes, adding a little-addressed dimension of complexity to the dialogue about protected area management. Conservation strategies aimed at reducing wetland loss in tropical habitats will benefit from careful analysis of the dominant land use system(s) at a relatively broad scale, and the subsequent development of management and policy responses that take into account dynamic opportunities and constraints in the landscape.     

Effects of copper fungicide residues on the microbial function of vineyard soils

The use of copper-based fungicides leads to an accumulation of copper (Cu) in vineyard soils, potentially causing adverse effects to the microbial function and fertility of the soil. This study used a soil microcosm approach to assess the effects of Cu accumulation on microbial function in vineyard soils. Surface soil samples were collected from 10 vineyards and a number of un-impacted reference sites in each of three different viticultural regions of Australia. The field-collected soils were transferred to microcosms and maintained for up to 93 days in the laboratory at 20–22 °C and 60 % of their maximum water-holding capacity. The microbial function of the soils was indicated by measuring phosphomonoesterase, arylsulfatase, urease, and phenol oxidase activities. In general, the vineyard soils had greater concentrations of Cu and lower enzyme activities than in the reference soils, although a weak negative relationship between Cu and enzyme activity could only be found for phosphomonoesterase activity. The results show that soil physical–chemical properties (i.e., organic carbon, pH) are greater determinants of soil enzyme activity than increased soil Cu concentration at the Cu concentrations present in vineyard soils.     

The biodegradation of cable oil components: impact of oil concentration, nutrient addition and bioaugmentation

The effect of cable oil concentration, nutrient amendment and bioaugmentation on cable oil component biodegradation in a pristine agricultural soil was investigated. Biodegradation potential was evaluated over 21 d by measuring cumulative CO₂ respiration on a Micro-Oxymax respirometer and ¹⁴C-phenyldodecane mineralisation using a ¹⁴C-respirometric assay. Cable oil concentration had a significant effect upon oil biodegradation. Microbial respiratory activity increased with increasing cable oil concentration, whereas ¹⁴C-phenydodecane mineralisation decreased. Bioaugmentation achieved the best cable oil biodegradation performance, resulting in increases in cumulative CO₂ respiration, and maximum rates and extents of ¹⁴C-phenyldodecane mineralisation. Generally, nutrient amendment also enhanced cable oil biodegradation, but not to the extent that degrader amendment did. Cable oil biodegradation was a function of (i) cable oil concentration and (ii) catabolic ability of microbial populations. Bioaugmentation may enhance cable oil biodegradation, and is dependent upon composition, cell number and application of catabolic inocula to soil.     

A Risk-Based Predictive Tool to Prevent Accidental Introductions of Nonindigenous Marine Species

Preventing the introduction of nonindigenous species (NIS) is the most efficient way to avoid the costs and impacts of biological invasions. The transport of fouling species on ship hulls is an important vector for the introduction of marine NIS. We use quantitative risk screening techniques to develop a predictive tool of the abundance and variety of organisms being transported by ocean-going yachts. We developed and calibrated an ordinal rank scale of the abundance of fouling assemblages on the hulls of international yacht hulls arriving in New Zealand. Fouling ranks were allocated to 783 international yachts that arrived in New Zealand between 2002 and 2004. Classification tree analysis was used to identify relationships between the fouling ranks and predictor variables that described the maintenance and travel history of the yachts. The fouling ranks provided reliable indications of the actual abundance and variety of fouling assemblages on the yachts and identified most (60%) yachts that had fouling on their hulls. However, classification tree models explained comparatively little of the variation in the distribution of fouling ranks (22.1%), had high misclassification rates (∼43%), and low predictive power. In agreement with other studies, the best model selected the age of the toxic antifouling paint on yacht hulls as the principal risk factor for hull fouling. Our study shows that the transport probability of fouling organisms is the result of a complex suite of interacting factors and that large sample sizes will be needed for calibration of robust risk models.     

Fertility signaling—the proximate mechanism of worker policing in a clonal ant

In eusocial insects, the ability to regulate reproduction relies on cues that signal the presence of fertile individuals. We investigated the variation of cuticular hydrocarbons (CHCs) with reproductive status in Platythyrea punctata, an ant, in which all workers are capable of producing daughters from unfertilized eggs (thelytoky). Who reproduces is determined through dominance and worker policing. New reproductives, which developed their ovaries after separation from an old reproductive for a short period of time, were attacked by nonreproductives upon reintroduction into their colony. In contrast, aggression against new reproductives with fully developed ovaries, which had been separated over a longer period, was initiated by fights between old and new reproductives. CHC profiles varied with ovarian development. New reproductives were only attacked when they expressed a CHC profile similar to old reproductives, but not when it was similar to that of nonreproductives. CHCs appear to signal the fertility of individuals and induce policing behavior towards surplus reproductive workers.     

Planning for ex situ conservation in the face of uncertainty

Ex situ conservation strategies for threatened species often require long‐term commitment and financial investment to achieve management objectives. We present a framework that considers the decision to adopt ex situ management for a target species as the end point of several linked decisions. We used a decision tree to intuitively represent the logical sequence of decision making. The first decision is to identify the specific management actions most likely to achieve the fundamental objectives of the recovery plan, with or without the use of ex‐situ populations. Once this decision has been made, one decides whether to establish an ex situ population, accounting for the probability of success in the initial phase of the recovery plan, for example, the probability of successful breeding in captivity. Approaching these decisions in the reverse order (attempting to establish an ex situ population before its purpose is clearly defined) can lead to a poor allocation of resources, because it may restrict the range of available decisions in the second stage. We applied our decision framework to the recovery program for the threatened spotted tree frog (Litoria spenceri) of southeastern Australia. Across a range of possible management actions, only those including ex situ management were expected to provide >50% probability of the species’ persistence, but these actions cost more than use of in situ alternatives only. The expected benefits of ex situ actions were predicted to be offset by additional uncertainty and stochasticity associated with establishing and maintaining ex situ populations. Naïvely implementing ex situ conservation strategies can lead to inefficient management. Our framework may help managers explicitly evaluate objectives, management options, and the probability of success prior to establishing a captive colony of any given species.     

Optimisation of zeolite LTA synthesis from alum sludge and the influence of the sludge source

Generation of alum sludge (AS) at drinking water treatment plants represents an environmental liability and adds to the cost of water purification. Consequently, this study explored the feasibility of using low and high carbon containing alum sludge from two water treatment plants to synthesize zeolite LTA. The hypothesis was that zeolite LTA synthesis was dependant upon alum sludge source and that a range of strategies may be required to optimize zeolite crystallinity. Zeolite characteristics such as morphology, phase composition, crystallinity, and particle size distribution were recorded. “One pot” hydrothermal synthesis of precursor gel with molar composition 4.2Na₂O:Al₂O₃:1.2SiO₂:168H₂O at 80°C for 3 hr resulted in 25 and 46 wt.% zeolite LTA from high and low carbonaceous sludge, respectively. Prior to hydrothermal reaction stage it was discovered that ageing of the gel, addition of zeolite LTA seeds, ultrasonic treatment and calcination all promoted zeolite LTA formation. Calcination of the alum sludge at 700°C for 2 hr before hydrothermal synthesis resulted in particle size reduction and the highest amount of crystalline zeolite LTA: 79 wt.% from low carbon sludge and 65 wt.% from high carbon sludge. Notably, the zeolite crystallinity reported in this study was the higher than previous studies on this topic. The outlined approach may allow value adding of alum waste and produce a commodity which could be used locally by the water treatment plant as a water softener.