A comparative study of macrobenthic community from harbours along the central west coast of India

Harbours are heavily stressed coastal habitats characterised by high concentration of contaminant and low diversity of benthic community. The west coast of India harbours most of the major harbours compared to the east coast. Very few studies have compared the macrobenthic community between different Indian harbours. The present study was therefore conducted in three important harbour (Ratnagiri, Goa, Karwar) along the central west coast of India. The paper discusses the health status of the three harbours diagnosed using various biotic indices. Sediment samples were collected using van Veen grab (0.11 m(2)) on board CRV Sagar Sukti. A total of 55 macrobenthic taxa were identified and were numerically dominated by polychaete. Biomass was high (0.14-145.7 g m(-2)) and was made largely by echiurans (>80%). Overall, polychaete dominated the macrobenthic diversity. Opportunistic P.pinnata, Notomastus sp. and Mediomastus sp., dominated the macrobenthic community responding to the increased in the harbour. Biotic indices (Polychaete:Amphipod ratio, ABC curve and geometric class abundance) and the dominance of opportunistic species indicate that, the three harbours are under stress from anthropogenic activities.     

Evaluation of the effect of porous check dam location on fine sediment retention (a case study)

This study was carried out to evaluate the influence of porous check dam location on the retention of fine sediments in the Droodzan watershed in Southern Iran. Five long streams with several porous check dams that were more than 27 years old were studied. In each stream three check dams: at the very upstream section, at the middle section and at the far downstream section were selected for analysis. A number of samples from trapped sediments and from the undisturbed soils in the stream banks (adjacent to the check dams) were collected. Laboratory analysis showed that the soil samples taken from undisturbed banks have smaller particle sizes compared to the trapped sediments. The results indicated that the check dams located at the far downstream sections were more efficient at trapping fine sediment than those located at the middle sections. Also the check dams located at the middle sections were more effective than those located at the upstream sections. Comparison of sediment texture also showed that the portion of clay and silt trapped by the check dams decreased from the downstream sections toward the upstream sections. Hence, whenever, the retention of fine sediments is the primary function of the check dams, it appears that they should be located in the far downstream sections of a stream. The experimental analysis indicated that using broken and angular rocks instead of rounded rocks in porous check dam's construction improves the effectiveness of the check dams for the retention of fine sediments. The analysis of the failed check dams also showed that erosion of the bank sides underneath the check dams is the primary cause of dam collapse.     

Evaluation of the Industrial Source Complex short-term model in a large-scale multiple source region for different stability classes

The original Industrial Source Complex Model (ISCST, 90346) and its latest version, the ISCST2 (92090), are evaluated for the 1- and 24-hour averaging periods, using six statistical parameters. The confidence limits on two parameters were obtained using the bootstrap, jacknife, seductive, and robust resampling techniques. Evaluation is conducted in a multiple point source environment and in all the different stability categories, using a year of meteorological data, emission inventory of the Lucas County, in Toledo, Ohio, and monitoring data from two nearby stations for the year 1987. This was representative of a real time situation in which the ISCST is generally applied for regulatory work. The sensitivity analysis shows that the ISC is a poor performing model in the 1-h and 24-h averaging period, neutral and stable categories, and modifications to it are necessary in order to improve its performance. Its performance changes depending on the chosen paired values. A better relative performance is observed in the unstable category relative to the neutral and stable categories. Improved model performance may be achieved by applying modifications to the physics on which the model is based.     

Effects of exposure of aquatic snails to sublethal concentrations of waste drilling fluid

Static bioassays were carried out using two aquatic snails (Pilia sp. and Lanistes sp.) as test organisms in soft natural dilution water, with waste drilling fluid as the test material, at 28±2°C. Comparison of results for the control and different concentrations of the waste drilling fluid were made by means of the F-statistic method. The waste drilling fluid was practically non-toxic to the two aquatic snails.     

Particulate matter concentration in ambient air and its effects on lung functions among residents in the National Capital Region, India

The World Health Organization has estimated that air pollution is responsible for 1.4 % of all deaths and 0.8 % of disability-adjusted life years. NOIDA, located at the National Capital Region, India, was declared as one of the critically air-polluted areas by the Central Pollution Control Board of the Government of India. Studies on the relationship of reduction in lung functions of residents living in areas with higher concentrations of particulate matter (PM) in ambient air were inconclusive since the subjects of most of the studies are hospital admission cases. Very few studies, including one from India, have shown the relationship of PM concentration and its effects of lung functions in the same location. Hence, a cross-sectional study was undertaken to study the effect of particulate matter concentration in ambient air on the lung functions of residents living in a critically air-polluted area in India. PM concentrations in ambient air (PM_1, PM_2.5) were monitored at residential locations and identified locations with higher (NOIDA) and lower concentrations (Gurgaon). Lung function tests (FEV₁, PEFR) were conducted using a spirometer in 757 residents. Both air monitoring and lung function tests were conducted on the same day. Significant negative linear relationship exists between higher concentrations of PM₁ with reduced FEV₁ and increased concentrations of PM_2.5 with reduced PEFR and FEV₁. The study shows that reductions in lung functions (PEFR and FEV₁) can be attributed to higher particulate matter concentrations in ambient air. Decline in airflow obstruction in subjects exposed to high PM concentrations can be attributed to the fibrogenic response and associated airway wall remodeling. The study suggests the intervention of policy makers and stake holders to take necessary steps to reduce the emissions of PM concentrations, especially PM_1, PM_2.5, which can lead to serious respiratory health concerns in residents.     

The spatial statistics formalism applied to mapping electromagnetic radiation in urban areas

Determining the electromagnetic radiation levels in urban areas is a complicated task. Various approaches have been taken, including numerical simulations using different models of propagation, sampling campaigns to measure field values with which to validate theoretical models, and the formalism of spatial statistics. In the work, we present here that this latter technique was used to construct maps of electric field and its associated uncertainty from experimental data. For this purpose, a field meter and a broadband probe sensitive in the 100-kHz–3-GHz frequency range were used to take 1,020 measurements around buildings and along the perimeter of the area. The distance between sampling points was 5 m. The results were stored in a geographic information system to facilitate data handling and analysis, in particular, the application of the formalism of spatial statistical to the analysis of the distribution of the field levels over the study area. The spatial structure was analyzed using the variographic technique, with the field levels at non-sampled points being interpolated by kriging. The results indicated that, in the urban area analyzed in the present work, the linear density of sampling points could be reduced to a distance which coincides with the length of the blocks of buildings without the statistical parameters varying significantly and with the field level maps being reproduced qualitatively and quantitatively.     

Phosphorous speciation in surface sediments of the Cochin estuary

Sequential chemical extraction using chelating agents were used to study the P dynamics and its bioavailability along the surface sediments of the Cochin estuary (southwest coast of India). Sediments were analyzed for major P species (iron bound P, calcium bound P, acid soluble organic P, alkali soluble organic P and residual organic P), Fe, Ca, total carbon, organic carbon, total nitrogen and total sulfur contents. An abrupt increase in the concentration of dissolved inorganic P with increasing salinity was observed in the study region. Iron-bound P exhibited a distinct seasonal pattern with maximum values in the monsoon season when fresh water condition was prevailed in the estuary. As salinity increased, the percentage of iron-bound P decreased, while that of calcium-bound P and total sedimentary sulfur increased. C/P and N/P ratios were low which indicate that large amounts of organic matter enriched with P tend to accumulate in surface sediments. The high organic P contribution in the sedimentary P pool may indicate high organic matter load with incomplete mineralization, as well as comparatively greater percentage of humic substance and resistant organic compounds. Principal component analysis is employed to find the possible processes influencing the speciation of P in the study region and indicate the following processes: (1) the spatial and seasonal variations of calcium bound P and acid soluble organic P was mainly controlled by sediment texture and organic carbon content, (2) sediment redox conditions control the distribution of iron bound P and (3) the terrigenous input of organic P is a significant processes controlling total P content in surface sediments. The bioavailable P was very high in the surface sediments which on an average accounts for 59 % in the pre-monsoon, 65 % in the monsoon and 53 % in the post-monsoon seasons. The surface sediments act as a potential internal source of P in the Cochin estuary.     

Sensitivity of isolated eggs of pond snails: a new method for toxicity assays and risk assessment

The concentration of heavy metals in the environment is normally low. We here address whether using the development of isolated pond snail Radix auricularia eggs would provide a more sensitive endpoint and whether the gelatinous matrix of the egg mass surrounding the eggs indeed protects the snail embryos. In the present study, artificial removal of the gelatinous matrix of egg masses greatly increased the sensitivity of developing eggs to a heavy metal (cadmium). The sensitivity of isolated eggs to cadmium was determined using several convenient endpoints, including mortality, hatching rate, and heart rate, with an acute toxicity test and a subchronic test. In the acute toxicity test, a 96-h LC₅₀ value of 58.26 μg/L cadmium was determined. In the subchronic toxicity test, sublethal effects in terms of a significant reduction in hatching rate could be found in the 25-μg/L treatment, and a significant decrease of heart rate was observed in both treatments (5 and 25 μg/L). The high sensitivity of isolated eggs indicates that such tests can be efficient for toxicity assays and risk assessment, although one needs to keep in mind that the ecologically relevant measure of toxicity will be how eggs are affected when they are still inside the egg mass.     

Main results of strategic noise maps and action plans in Navarre (Spain)

According to Directive 2002/49, strategic noise maps and their correspondent action plans were carried out in the Autonomous Community of Navarre, Spain. Six strategic noise maps were produced for 120 km of major roads as well as a strategic noise map for the Agglomeration of the Region of Pamplona (ARP) with a population of 280,199 inhabitants. In the ARP, a total of 36,400 people (13.0 %) are exposed to Ln levels over 55 dBA and 42,300 people (15.1 %) are exposed to Lden levels over 65 dBA. With regard to major roads, a total of 3,900 people are exposed to Ln levels over 55 dBA and 2,400 people are exposed to Lden levels over 65 dBA. When designing action plans, different prioritisation criteria concerning rank-based effectiveness measures (mainly the amount of people benefitting from them) were taken into account.     

Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.