The effect of phosphogypsum on greenhouse gas emissions during cattle manure composting

Phosphogypsum (PG), a by-product of the phosphate fertilizer industry, reduces N losses when added to composting livestock manure, but its impact on greenhouse gas emissions is unclear. The objective of this research was to assess the effects of PG addition on greenhouse gas emissions during cattle feedlot manure composting. Sand was used as a filler material for comparison. The seven treatments were PG10, PG20, PG30, S10, S20, and S30, representing the rate of PG or sand addition at 10, 20, or 30% of manure dry weight and a check treatment (no PG or sand) with three replications. The manure treatments were composted in open windrows and turned five times during a 134-d period. Addition of PG significantly increased electrical conductivity (EC) and decreased pH in the final compost. Total carbon (TC), total nitrogen (TN), and mineral nitrogen contents in the final composted product were not affected by the addition of PG or sand. From 40 to 54% of initial TC was lost during composting, mostly as CO(2), with CH(4) accounting for <14%. The addition of PG significantly reduced CH(4) emissions, which decreased exponentially with the compost total sulfur (TS) content. The emission of N(2)O accounted for <0.2% of initial TN in the manure, increasing as compost pH decreased from alkaline to near neutral. Based on the total greenhouse gas budget, PG addition reduced greenhouse gas emissions (CO(2)-C equivalent) during composting of livestock manure by at least 58%, primarily due to reduced CH(4) emission.     

Occurrence and fate of pharmaceuticals and personal care products (PPCPs) in biosolids

Each year, large quantities of pharmaceuticals and personal care products (PPCPs) are used worldwide. Once conveyed to wastewater treatment plants, PPCPs can remain unchanged or undergo partial or complete transformation during wastewater treatment processes before discharge into the environment via effluent and biosolids for land application. Biosolids can be a major sink for some PPCPs. Previous investigations have indicated that land application of biosolids may be a potential important route through which PPCPs enter the environment. However, no information is available on exactly how closely the concentrations of PPCPs in the environmental media are related to the land application of PPCP-containing biosolids. This paper reviews currently available information on the occurrence of PPCPs in biosolids, methods of analysis, the potential fate of PPCPs in biosolids-applied soils, and composting as a potential means for removal of PPCPs from biosolids.     

Biodegradability of a Selected Range of Polymers and Polymer Blends and Standard Methods for Assessment of Biodegradation

Synthetic polymers are important to the packaging industry but their use raises aesthetic and environmental concerns, particularly with regard to solid waste accumulation problems and the threat to wildlife. Some concerns are addressed by attention to problems associated with source reduction, incineration, recycling and landfill. Others are addressed by the development of new biodegradable polymers either alone or in blends. Materials used for biodegradable polymers include various forms of starch and products derived from it, biopolyesters and some synthetic polymers. Starch is rapidly metabolised and is an excellent base material for polymer blends or for infill of more environmentally inert polymers where it is metabolised to leave less residual polymer on biodegradation. This should help to improve the environmental impact of waste disposal. A number of standard methods have been developed to estimate the extent of biodegradability of polymers under various conditions and with a variety of organisms. They tend to be used mainly in the countries where they were developed but there is much overlap between the standards of different countries and wide scope for development of consistent and international standards.     

Monitoring global change: Comparison of forest cover estimates using remote sensing and inventory approaches

Satellite-based remote sensing offers great potential for frequent assessment of forest cover over broad spatial scales, however, calibration and validation using ground-based surveys are needed. In this study, forest cover estimates for the United States from a recently developed land surface cover map generated from satellite remote sensing data were compared to state-level inventory data from the U.S. National Resources Planning Act Timber Database. The land cover map was produced at the U.S. Geological Survey EROS Data Center and is based on imagery from the AVHRR sensor (spatial resolution 1.1 km). Vegetation type was classified using the temporal signal in the Normalized Difference Vegetation Index derived from AVHRR data. Comparisons revealed close agreement in the estimate of forest cover for extensively forested states with large polygons of relatively similar vegetation such as Oregon. Larger forest cover differences were observed in other states with some regional patterns in the level of agreement apparent.Comparisons in inventory- and remote sensing-based estimates of current forested area with potential vegetation maps indicated the magnitude of past land use change and the potential for future changes. The remote sensing approach appears to hold promise for conducting surveys of forest cover where inventory data are limited or where rates of vegetation change, due to human or climatic factors, are rapid.     

Effect of pore-water velocity on chemical nonequilibrium transport of Cd,Zn, and Pb in alluvial gravel columns

This paper investigates the effects of pore-water velocity on chemical nonequilibrium during transport of Cd, Zn, and Pb through alluvial gravel columns. Three pore-water velocities ranging from 3 to 60 m/day were applied to triplicate columns for each metal. Model results for the symmetric breakthrough curves (BTCs) of tritium (3H2O) data suggest that physical nonequilibrium components were absent in the uniformly packed columns used in these studies. As a result, values of pore-water velocity and dispersion coefficient were estimated from fitting 3H2O BTCs to an equilibrium model. The BTCs of metals display long tailing, indicating presence of chemical nonequilibrium in the system, which was further supported by the decreased metal concentrations during flow interruption. The BTCs of the metals were analysed using a two-site model, and transport parameters were derived using the CXTFIT curve-fitting program. The model results indicate that the partitioning coefficient (beta), forward rate (k1), and backward rate (k2) are positively correlated with pore-water velocity (V); while the retardation factor (R), mass transfer coefficient ((omega), and ratio of k1/k2 are inversely correlated with V. There is no apparent relationship between the fraction of exchange sites at equilibrium (f) and V. The influence of Von k2 is much greater than on R, beta, omega, and k1. A one-order-of-magnitude change in V would cause a two-order-of-magnitude change in k2 while resulting in only a one order-of-magnitude change in R, beta, omega, and k1. The forward rates for the metals are found to be two to three orders-of-magnitude greater than the corresponding backward rate. However, the difference between the two rates reduces with increasing pore-water velocity. Model results also suggest that Cd and Zn behave similarly, while Pb is much more strongly sorbed. At input concentrations of about 4 mg/l and pore-water velocities of 3-60 m/day in the groundwater within alluvial gravel, this study suggests retardation factors of 26-289 for Cd, 24-255 for Zn, and 322-6377 for Pb.     

Acid-generating salts and their relationship to the chemistry of groundwater and storm runoff at an abandoned mine site in southwestern Indiana, U.S.A.

Cation distributions in twenty samples of acid-generating salts were compared to those in groundwater and storm runoff from a coal-refuse deposit in an effort to identify source-product relationships. Two mineral suites, one primarily composed of melanterite, rozenite and szomolnokite, and the other composed almost entirely of copiapite, were found to be most abundant at the study site. Comparisons of cation distributions in salts with those in water samples lead to an hypothesis that a copiapite-rich suite precipitated from vadose-zone ground-water that was brought to the surface by evaporative forcing. The copiapite-rich suite, which contained larger concentrations of aluminum, calcium and zinc that the melanterite-rozenite-szomolnokite mineral suite, was the primary source of solutes in captured storm runoff. An analysis of samples collected during a summer thunderstorm indicated that the chemistry of surface runoff varied little with time or with distance downstream. The cation distributions in samples of groundwater indicated that iron-rich pore waters observed near the surface in late autumn may have influenced water chemistry in the deeper portions of the unsaturated zone during the 1989 recharge season. The results of this study show that the solutes produced by the two observed salt suites can be distinguished by their mole percent iron and that the source-product relationships can explain observed variability in mine drainage chemistry at the study site.     

Elements of a Predictive Model for Determining Beach Closures on a Real Time Basis: The Case of 63rd Street Beach Chicago

Data on hydrometeorological conditions and E. coli concentration were simultaneously collected on 57 occasions during the summer of 2000 at 63rd Street Beach, Chicago, Illinois. The data were used to identify and calibrate a statistical regression model aimed at predicting when the bacterial concentration of the beach water was above or below the level considered safe for full body contact. A wide range of hydrological, meteorological, and water quality variables were evaluated as possible predictive variables. These included wind speed and direction, incoming solar radiation (insolation), various time frames of rainfall, air temperature, lake stage and wave height, and water temperature, specific conductance, dissolved oxygen, pH, and turbidity. The best-fit model combined real-time measurements of wind direction and speed (onshore component of resultant wind vector), rainfall, insolation, lake stage, water temperature and turbidity to predict the geometric mean E. coli concentration in the swimming zone of the beach. The model, which contained both additive and multiplicative (interaction) terms, accounted for 71% of the observed variability in the log E. coli concentrations. A comparison between model predictions of when the beach should be closed and when the actual bacterial concentrations were above or below the 235 cfu 100 ml(-1) threshold value, indicated that the model accurately predicted openings versus closures 88% of the time.     

Performance of conventional remedial technology for treatment of MTBE and benzene at UST sites in Kansas

Groundwater at most underground storage tank (UST) spills sites in Kansas contains both methyl tertiary butyl ethylene (MTBE) and benzene, and both contaminants must be effectively treated to close the sites. Soil vacuum extraction, air sparging, and excavation are the most common treatment technologies in Kansas. To compare the relative performance of these conventional remedial technologies for treating MTBE as compared to benzene, 66 sites in the Kansas UST Trust Fund were identified that had initial concentrations of both MTBE and benzene above the reporting limit of 1 μg/L, and that had at least two rounds of analytical data. Sites were excluded from the comparison if the monitoring wells had free product. Of the 66 sites, 15 had met the clean‐up goal for benzene, and 50 had met the goal for MTBE. The extent of treatment for MTBE and benzene was calculated as the ratio of the highest concentration in any well at the site in the most recent round of sampling to the maximum concentration in any well at the site in the previous rounds of sampling. The extent of treatment was greater for MTBE (statistically significant at p = 0.032). The geometric mean of the extent of treatment in the 66 sites was 0.057 for MTBE, compared to 0.14 for benzene. In Kansas, conventional technologies removed MTBE from the source areas of groundwater plumes at least as effectively as they removed benzene. © 2003 Wiley Periodicals, Inc.     

Remaking the world in our own image: vulnerability,resilience and adaptation as historical discourses

A warming climate and less predictable weather patterns, as well as an expanding urban infrastructure susceptible to geophysical hazards, make the world an increasingly dangerous place, even for those living in high‐income countries. It is an opportune moment, therefore, from the vantage point of the second decade of the twenty‐first century, to review the terms and concepts that have been employed regularly over the past 50 years to assess risk and to measure people's exposure to such events in the light of the wider geopolitical context. In particular, it is useful to examine ‘vulnerability’, ‘resilience’, and ‘adaptation’, the principal theoretical concepts that, from an historical perspective, have dominated disaster studies since the end of the Second World War. In addition, it is valuable to enquire as to the extent to which such discourses were ideological products of their time, which sought to explain societies and their environments from the stance of competing conceptual frameworks.     

Behavioral consequences of exotic host plant adoption and the differing roles of male harassment on female movement in two checkerspot butterflies

Herbivorous insects may evolve convergent behaviors when independent adoption of a shared novel host plant places populations in environmental conditions that diverge from the ancestral state. We investigated the behavioral consequences of adopting Plantago lanceolata, an exotic species to North America, in populations of Euphydryas p. phaeton and Euphydryas editha taylori, on the east and west coasts of North America. Activity budgets and short-term movements suggested that innate species tendencies exert a greater impact on behavior than adoption of the same exotic host plant. However, female E. phaeton from a Plantago-dependent population spent more time inspecting host plants than females from a population dependent on the native host plant, Chelone glabra. Both checkerspot species had similar diffusion coefficients (D) regardless of host plant association. But, E. e. taylori step-lengths appeared bimodal and power law distributed while E. phaeton step-lengths were unimodal and best fit by an exponential distribution. We attribute this bimodal step-length distribution to the persistent harassment of courting males which induces a “long-distance” evasive flight in otherwise sedentary E. e. taylori females. In contrast, the longer distance step-lengths of E. phaeton were associated with the inspection of oviposition plants. These two checkerspot species appear to move greater distances across the reproductive landscape with contrasting motivational states that could lead to either intimate mapping (E. phaeton) or coarse mapping (E. e. taylori) of host resources.