Particulate emissions from construction activities

Although it has long been recognized that road and building construction activity constitutes an important source of particulate matter (PM) emissions throughout the United States, until recently only limited research has been directed to its characterization. This paper presents the results of PM10 and PM2.5 (particles < or = 10 microm and < or = 2.5 microm in aerodynamic diameter, respectively) emission factor development from the onsite testing of component operations at actual construction sites during the period 1998-2001. Much of the testing effort was directed at earthmoving operations with scrapers, because earthmoving is the most important contributor of PM emissions across the construction industry. Other sources tested were truck loading and dumping of crushed rock and mud and dirt carryout from construction site access points onto adjacent public paved roads. Also tested were the effects of watering for control of scraper travel routes and the use of paved and graveled aprons at construction site access points for reducing mud and dirt carryout. The PM10 emissions from earthmoving were found to be up to an order of magnitude greater than predicted by AP-42 emission factors drawn from other industries. As expected, the observed PM2.5:PM10 emission factor ratios reflected the relative importance of the vehicle exhaust and the resuspended dust components of each type of construction activity. An unexpected finding was that PM2.5 emissions from mud and dirt carryout were much less than anticipated. Finally, the control efficiency of watering of scraper travel routes was found to closely follow a bilinear moisture model.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

Phenotypic differentiation in female preference related to geographic variation in male predation risk in the Trinidad guppy (Poecilia reticulata)

Summary Populations of the Trinidad guppy range from areas with high levels of predation by other species of fish to areas with little or no piscine predation. Previous studies have shown that variation among populations in male coloration can be explained by a balance between female preference for brighter males and natural selection against bright males. High levels of male courtship activity may also increase both predation risk and mating success. Therefore, in high-predation areas, females that mate with males that court frequently as well as those that choose bright males would presumably produce male offspring with low survivorship. Consistent with this variation in natural selection, we observed that females from high-predation populations were less likely to choose bright and frequently courting males than females from low-predation populations. This result supports the hypothesis that female preference is evolving as a character genetically correlated with the preferred male character, in which case higher levels of natural selection acting against the male character should be related to lower levels of female preference.     

Making the CERCLA Criteria Analysis of Remedial Alternatives More Objective

This article shows how decision analysis techniques assisted decision makers in the critical RI/FS task of technology selection at a specific Superfund site. Each remediation alternative's performance was quantified by creating a set of objective evaluation measures tied to the criteria mandated in the comprehensive Environmental Response, Compensation and Liability Act of 1980. The evaluation measure scores were input into a quantitative decision analysis model used to rank alternatives based on their performance relative to the CERCLA criteria, and to provide insight to the sensitivity of the results to changes in decision maker preferences or technology performance. The model is designed to reflect the site decision maker's preferences and the site-specific characteristics within the framework of the nine CERCLA criteria. This model will give Superfund site decision makers an objective and transparent framework to evaluate remedial technologies.     

Studies of metal-binding sites in natural organic matter and their role in the generation of disinfection by-products using lanthanide ion probes

In this study, the complexation of Tb3+ with natural organic matter (NOM) was studied by the method of time-resolved fluorescence spectroscopy. In the presence of NOM, the excitation of Tb3+ was observed in a wide range of wavelengths, for which virtually no excitation of free Tb3+ took place. The pseudo-quantum yield spectra (excitation intensity normalized by corresponding light absorbance values) had a maximum at 282 nm. This indicated that the excitation of NOM-bound Tb3+ proceeds through energy transfer from aromatic groups in NOM. The concentration of the metal-binding sites (C(L)) was determined by titration with Tb3+ and was found to range from 0.21% to 0.83% of total moles of organic carbon. The actual number of the carbon atoms that comprise these functionalities was hypothesized to be at least seven times higher. The C(L) values were well correlated with the reactivity of NOM with chlorine quantified by total organic halogen formation potential and with the contribution of polyhydroxyaromatic moieties determined by pyrolysis-GC/MS method. The correlation of C(L) with the contributions of aromatic and carboxylic moieties in NOM determined by 13C NMR was poor. Based on the data, it was concluded that the metal binding functionalities in NOM are closely associated with halogen attack sites.     

Generation pattern of sulfur containing gases from anaerobically digested sludge cakes.

Eleven dewatered sludge cakes collected from anaerobic digesters at different treatment plants were evaluated for the amount, type, and pattern of odorous gas production. All but one of the sludge cakes were from mesophilic anaerobic digesters. One was from a thermophilic digester. The pattern and quantities of sulfur gases were found to be unique for each of the samples with regard to the products produced, magnitude, and subsequent decline. The main odor-causing chemicals were volatile sulfur compounds, which included hydrogen sulfide, methanethiol, and dimethyl sulfide. Volatile sulfur compound production peaked in 3 to 8 days and then declined. The decline was a result of conversion of organic sulfur compounds to sulfide. In one side-by-side test, a high-solids centrifuge cake generated more odorous compounds than the low-solids centrifuge cake. The data show that anaerobic digestion does not eliminate the odor potential of anaerobically digested dewatered cakes.     

Investigation of unrecognized former secondary lead smelting sites: confirmation by historical sources and elemental ratios in soil

Twelve suspected former secondary lead smelting sites were investigated. Ten of the sites were confirmed to be former secondary lead smelters or lead works by historical fire insurance maps and contemporaneous metal industry trade directories. At eight sites sampled, the ratio Sb:Pb was closer to ratios from 10 known lead smelting sites than were the As:Pb and Cd:Pb ratios. Data from the 10 known lead smelting sites showed that the Sb:Pb ratio is most characteristic of secondary lead smelting sites. This is because the primary alloy smelted at such sites is antimonial lead. Lead contamination at the eight sites investigated here can be attributed At least in part to the former smelters because of the association between Sb and Pb.     

A strategy for the next decade to address data deficiency in neglected biodiversity

Measuring progress toward international biodiversity targets requires robust information on the conservation status of species, which the International Union for Conservation of Nature (IUCN) Red List of Threatened Species provides. However, data and capacity are lacking for most hyperdiverse groups, such as invertebrates, plants, and fungi, particularly in megadiverse or high-endemism regions. Conservation policies and biodiversity strategies aimed at halting biodiversity loss by 2020 need to be adapted to tackle these information shortfalls after 2020. We devised an 8-point strategy to close existing data gaps by reviving explorative field research on the distribution, abundance, and ecology of species; linking taxonomic research more closely with conservation; improving global biodiversity databases by making the submission of spatially explicit data mandatory for scientific publications; developing a global spatial database on threats to biodiversity to facilitate IUCN Red List assessments; automating preassessments by integrating distribution data and spatial threat data; building capacity in taxonomy, ecology, and biodiversity monitoring in countries with high species richness or endemism; creating species monitoring programs for lesser-known taxa; and developing sufficient funding mechanisms to reduce reliance on voluntary efforts. Implementing these strategies in the post-2020 biodiversity framework will help to overcome the lack of capacity and data regarding the conservation status of biodiversity. This will require a collaborative effort among scientists, policy makers, and conservation practitioners.