In situ construction of Z-scheme FeS2/Fe2O3 photocatalyst via structural transformation of pyrite for photocatalytic degradation of carbamazepine and the synergistic reduction of Cr(VI)

Pyrite is the most abundant sulfide semiconductor mineral with excellent optical properties. However, few reports have investigated its photocatalytic activity because of the low photogenerated carrier separation efficiency. In this work, a Z-scheme FeS₂/Fe₂O₃ composite photocatalyst was fabricated in situ via structural transformation of pyrite through heat treatment. A remarkably enhanced photocatalytic performance was observed over the FeS₂/Fe₂O₃ composite photocatalyst. Compared with the pristine pyrite, the degradation efficiency of carbamazepine (CBZ) reached 65% at the added hexavalent chromium (Cr(Ⅵ)) concentration of 20 mg/L and the Cr(Ⅵ) was nearly completely reduced in the mixed system using FeS₂/Fe₂O₃ within 30 min under simulated solar light irradiation. The enhanced photocatalytic activity can be attributed to the efficient separation and transfer of photogenerated carriers in the FeS₂/Fe₂O₃ composite photocatalyst. This facilitated the generation of ?OH, hole (h⁺) and ?O₂^? species, which participated in the photocatalytic reaction with CBZ. Based on the measurement of the active species and electric properties, a Z-scheme electron transfer pathway was proposed for the FeS₂/Fe₂O₃ composite photocatalyst. This work broadens the application potential of pyrite in environmental remediation.     

Enrichment of thermophilic and mesophilic microbial consortia for efficient degradation of corn stalk

Six different environmental samples were applied to enrich microbial consortia for efficient degradation of corn stalk,under the thermophilic and mesophilic conditions.The consortium obtained from anaerobic digested sludge under thermophilic condition(TC-Y)had the highest lignocellulose-degrading activity.The CO_2yield was 246.73 m L/g VS in23 days,meanwhile,the maximum CO_2production rate was 15.48 mL/(CO_2·d),which was28.75%and 52.27%higher than that under mesophilic condition,respectively.The peak value of cellulase activity reached 0.105 U/mL,which was at least 34.61%higher than the other groups.In addition,49.5%of corn stalk was degraded in 20 days,moreover,the degradation ratio of cellulose,hemicellulose and lignin can reach 52.76%,62.45%and42.23%,respectively.Microbial consortium structure analysis indicated that the TC-Y contained the phylum of Gemmatimonadetes,Acidobacteria,Chloroflexi,Planctomycetes,Firmicutes,and Proteobacteria.Furthermore,the Pseudoxanthomonas belonging to GammaProteobacteria might be the key bacterial group for the lignocellulose degradation.These results indicated the capability of degrading un-pretreated corn stalk and the potential for further investigation and application of TC-Y.     

Thiocyanate-induced labilization of schwertmannite: Impacts and mechanisms

Schwertmannite is an amorphous iron(III)-oxyhydroxysulfate that forms in acid mine drainage(AMD) environments. The characteristic of high heavy metal adsorption capability makes schwertmannite a potentially useful, environmentally friendly material in wastewater treatment. Unstable schwertmannite is prone to recrystallization.Understanding the mechanisms that induce schwertmannite labilization and affect its capacity to remove heavy metals are of great environmental and geochemical significance.Thiocyanate(SCNˉ) is a hazardous pseudohalide that is also normally found in AMD.However, little is known about the impact of Fe(III)-binding ligand SCNˉ on schwertmannite stability and its subsequent capacity to bind trace elements. Here, we investigated the adsorption of SCNˉ on schwertmannite and subsequent mineral transformation to characterize this little-known process. The appearance of Fe2+indicated that the interactions between schwertmannite and SCNˉ may involve complexation and reduction reactions. Results showed that the majority of the adsorbed-SCNˉ was immobilized on schwertmannite during the 60-days transformation. The transformation rates of schwertmannite increased with increasing concentrations of SCNˉ. Goethite was detected as the dominant transformation product with or without SCNˉ. The mechanisms of SCNˉ-promoted dissolution of schwertmannite can be described as follows:(1) formation of Fe(III)–NCS complexes on the schwertmannite surface and in solution, a process which increases the reactivity of solid phase Fe(III);(2) the extraction of Fe(III) from schwertmannite by SCNˉ and subsequent schwertmannite dissolution; and(3) the formation of secondary minerals from extracted Fe(III). These findings may improve AMD treatment strategies and provide insight into the use and potential reuse of schwertmannite as a trace element sorbent.     

Nitrogen-cycling microbial community functional potential and enzyme activities in cultured biofilms with response to inorganic nitrogen availability

Biofilms mediate crucial biochemical processes in aquatic ecosystems. It was hypothesized that eutrophication may promote the growth of biofilms, resulting in larger numbers of functional genes. However, the metabolic activity and the roles of biofilms in N cycling will be affected by ambient inorganic nitrogen availability, not by the abundance of functional genes. Biofilms were cultured either with replete inorganic nitrogen(N-rep) or without exogenous inorganic nitrogen supply(N-def) in a flow incubator, and the N-cycling gene abundances(nifH, N_2 fixation; amoA, ammonia oxidation, archaea and bacteria; nirS and nirK, denitrification) and enzyme activities(nitrogenase and nitrate reductase) were analyzed. The results showed that, comparing the N-def and N-rep biofilms, the former contained lower nifH gene abundance, but higher nitrogenase activity(NA), while the latter contained higher nifH gene abundance, but lower NA. Different patterns of NA diel variations corresponded to the dynamic microbial community composition and different stages of biofilm colonization. Ammonia oxidizing bacteria(AOB), detected only in N-def biofilms, were responsible for nitrification in biofilms. N-rep biofilms contained high nirS and nirK gene abundance and high denitrification enzyme activity, but N-def biofilms contained significantly lower denitrification gene abundance and activity. In general,the strong N_2 fixation in N-def biofilms and strong denitrification in N-rep biofilms assured the balance of aquatic ecosystems. The results suggested that evaluation of the functional processes of N cycling should not only focus on genetic potential, but also on the physiological activity of biofilms.     

催化裂化装置职业病危害工程控制措施分析

根据某催化裂化装置的生产工艺特点,分析了生产过程中产生的主要职业病危害因素,针对高毒物品和能够对人体健康造成严重损伤的职业病危害因素,提出相应的工程控制措施,从源头上降低职业病危害风险水平。     

HAZOP分析在安全管理应用中的问题分析及对策探讨

介绍了HAZOP分析在高含硫气田开发生产中的应用情况,探讨了HAZOP分析方法在应用过程中存在的问题,提出了对策措施和建议。     

建筑维修中的石棉安全与防护

本文主要介绍欧盟及其成员国有关石棉的法律法规,阐述了如何对接触石棉带来的风险进行识别、评估和管理,并提出了建筑维修中石棉安全与防护措施。     

Source analysis of particulate matter associated polycyclic aromatic hydrocarbons (PAHs) in an industrial city in northeastern China

Particle-associated polycyclic aromatic hydrocarbon (PAH) concentrations were investigated at eight sampling sites during cold periods where heating is used (heating period) (February to March, 2005) and warm periods where heating is not required (non-heating periods) (August to September 2006) in the urban area of Anshan, an iron and steel city in northeastern China. Eleven PAH species were measured using GC-MS. The total average concentrations of PAHs ranged from 46.14 to 385.60 ng m(-3) in the heating period and from 5.28 to 146.40 ng m(-3) in the non-heating period. The lowest concentration of ∑PAHs was observed at Qianshan, a monitoring site far from the city and industrial area, and the highest concentration occurred in the site located at the factory area of Anshan Iron and Steel Incorporation. Moreover, ambient PAH profiles were studied and high molecular weight PAH (including 4-6 rings) species occurred in the high fractions. Toxic equivalent factors analysis gave the potential carcinogenic risks in Anshan. For the heating sampling period, BaP equivalent concentration is in the range of 41.98 to 220.83 ng m(-3), and 9.23 to 126.00 ng m(-3) for the non-heating sampling period. By diagnostic ratio analysis, traffic emission and combustion (coal or biomass) were potential sources for PAHs in Anshan. Finally, PCA results indicated the major sources were vehicle emission, steel industry emission, and coal combustion for both heating and non-heating seasons, which agreed with the results from the diagnostic ratio analysis.