Valorization of sodium sulfate waste to potassium sulfate fertilizer: experimental studies,process modeling,and optimization

ABSTRACT

Sodium sulfate is a common low-value industrial by-product but can be managed using the Glaserite process to convert it into high-value potassium sulfate. The aim of the study is to investigate the potential for implementing this process in an industrial application. Experimental studies were completed to determine the yield and purity of both glaserite and potassium sulfate. Process simulation using SysCAD was utilized to optimize a two-stage glaserite process to produce potassium sulfate. Comparison of experimental and simulated data was made to validate the simulator’s results, finding the AAD in solid and liquid phase for glaserite production to be 6.9% and 5.7%, respectively, and for potassium sulfate to be 5.7% and 2.3%, respectively. For a process treating seven MT/hr of Na₂SO₄, a KCl feed strategy of 3.0 MT/hr to the glaserite reactor and 4.5 MT/hr to the K₂SO₄ reactor was found to maximize yield and minimize water demand. It was also found that ambient temperatures were preferred for the K₂SO₄ reactor and that K₂SO₄ yield suffered significantly under certain conditions when the glaserite reactor operated at 50°C or above.     

Environmental impacts of training activities at an air weapons range

Within Canada, it has been recognized in the last decade that military training activities may have impacts on the environmental quality of training ranges. However, impacts of activities specific to Air Force Bases have not yet been intensely documented. A hydrogeological study was accomplished at the Cold Lake Air Weapons Range, Alberta, to evaluate the environmental impacts of using bombs, rockets, strafing, and open burning/open detonation (OB/OD) on the quality of soil, ground water, surface water, and lake sediments. Samples were analyzed for metals, anions, ammonium perchlorate (NH(4)ClO(4)), and energetic materials (EM). It was found that training activities did not result in measured values being exceeded on the basis of guidance values for surface water and lake sediments. Contamination by metals was mostly limited to soils, and some metals may be related to the use of bombs (Cd, Cu, Pb), strafe (Cu), and rockets (As, Ba, Cd, Cr, Cu, Fe, Ni, Pb, U, V, Zn). TNT (2,4,6-trinitrotoluene) was the main EM found in soils, while RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) was more common in ground water. Both are related to live bombing, while nitroglycerine (NG) is related to rocket use and was detected in soils only. Aluminum, nitrate, and ammonium perchlorate detected in ground water may be related to live bombing or rockets. OB/OD operations resulted in the presence of various EM in soils, and of perchlorate and nitrate in ground water. Contamination by metals and explosives in soils was localized around the targets and varied significantly in time; however, in ground water it was more constant and may persist for a period of several years after a target has been removed.     

Modelling forest succession in two southeastern Canadian mixedwood ecosystem types using the ZELIG model

The gap model ZELIG was validated for red spruce–balsam fir–yellow birch and yellow birch–sugar maple–balsam fir forest types in southern Quebec, Canada. Long-term historical data originating from the Lake Edward Experimental Forest, La Mauricie National Park, were used. The effect of the variation in plot size, representing the space within which trees uptake site resources, was also examined. Several species were included in both forest types: red spruce (Picea rubens Sarg.), balsam fir (Abies balsamea (L.) Mill.), yellow birch (Betula alleghaniensis Britton), white birch (Betula papyrifera Marsh.), red maple (Acer rubrum L.), sugar maple (Acer saccharum Marsh.), American beech (Fagus grandifolia Ehrh.), eastern hemlock (Tsuga canadensis (L.) Carr.) and northern white cedar (Thuja occidentalis L.). The pattern of change in basal area growth varied among species, ranging from a steady increase to a more or less rapid decline. There was a good agreement between observations and predictions for yellow birch, red spruce, red maple, sugar maple, balsam fir and northern white cedar. Plot size had a significant impact on the dynamics of the different species. Depending on the species, the decline was accelerated, the amplitude of the fluctuations varied, or the maximum basal area reached changed. Predicted regeneration varied among species and the number of seedlings generally increased with increase in plot size. The pattern of development for most species was related to their life characteristics. The results highlighted the fact that there is a critical lack of knowledge and data on the dynamics of regeneration from the seedling to the sapling stages for the two forest types studied, which resulted in poor predictions for some species. As the life characteristics varied among species, the use of only one plot size for all species may not be realistic.     

Vegetation Cover and Long-Term Conservation of Radioactive Waste Packages: The Case Study of the CSM Waste Disposal Facility (Manche District,France)

The CSM is the first French waste disposal facility for radioactive waste. Waste material is buried several meters deep and protected by a multi-layer cover, and equipped with a drainage system. On the surface, the plant cover is a grassland vegetation type. A scientific assessment has been carried out by the Géophen laboratory, University of Caen, in order to better characterize the plant cover (ecological groups and associated soils) and to observe its medium and long term evolution. Field assessments made on 10 plots were complemented by laboratory analyses carried out over a period of 1 year. The results indicate scenarios and alternative solutions which could arise, in order to passively ensure the long-term safety of the waste disposal system. Several proposals for a blanket solution are currently being studied and discussed, under the auspices of international research institutions in order to determine the most appropriate materials for the storage conditions. One proposal is an increased thickness of these materials associated with a geotechnical barrier since it is well adapted to the forest plants which are likely to colonize the site. The current experiments that are carried out will allow to select the best option and could provide feedback for other waste disposal facility sites already being operated in France (CSFMA waste disposal facility, Aube district) or in other countries.     

Application of a Combined Measurement and Modeling Method to Quantify Windblown Dust Emissions from the Exposed Playa at Mono Lake,California

ABSTRACT

Particulate matter ≤10 μm (PM₁₀) emissions due to wind erosion can vary dramatically with changing surface conditions. Crust formation, mechanical disturbance, soil texture, moisture, and chemical content of the soil can affect the amount of dust emitted during a wind event. A refined method of quantifying windblown dust emissions was applied at Mono Lake, CA, to account for changing surface conditions. This method used a combination of real-time sand flux monitoring, ambient PM₁₀ monitoring, and dispersion modeling to estimate dust emissions and their downwind impact. The method identified periods with high emissions and periods when the surface was stable (no sand flux), even though winds may have been high. A network of 25 Cox sand catchers (CSCs) was used to measure the mass of saltating particles to estimate sand flux rates across a 2-km² area. Two electronic sensors (Sensits) were used to time-resolve the CSC sand mass to estimate hourly sand flux rates, and a perimeter tapered element oscillating microbalance (TEOM) monitor measured hourly PM₁₀ concentrations. Hourly sand flux rates were related by dispersion modeling to hourly PM₁₀ concentrations to back-calculate the ratio of vertical PM₁₀ flux to horizontal sand flux (K-factors). Geometric mean K-factor values (K _f) were found to change seasonally, ranging from 1.3 × 10^?5 to 5.1 × 10^?5 for sand flux measured at 15 cm above the surface (q ₁₅). Hourly PM₁₀ emissions, F, were calculated by applying seasonal K-factors to sand flux measurements (F?=?K _f ×?q ₁₅). The maximum hourly PM10 emission rate from the study area was 76 g/m²·hr (10-m wind speed?=?23.5 m/sec). Maximum daily PM₁₀ emissions were estimated at 450 g/m²·day, and annual emissions at 1095 g/m²·yr. Hourly PM₁₀ emissions were used by the U.S. Environmental Protection Agency (EPA) guideline AERMOD dispersion model to estimate downwind ambient impacts. Model predictions compared well with monitor concentrations, with hourly PM₁₀ ranging from 16 to over 60,000 μg/m³ (slope?=?0.89, R ²?=?0.77).

IMPLICATIONS Under a U.S. Environmental Protection Agency (EPA)-approved plan, the method described in this paper has been used since 2000 at Owens Lake, CA, to identify and successfully mitigate dust from over 100 km² of the dry lakebed. It continues to be used to monitor dust control compliance at Owens Lake. Scaled-down versions of the Owens Lake network can be implemented in other areas in a manner similar to the Mono Lake study. Once K-factors are established, low-cost CSC samplers (about $35 U.S.) may be used for periodic monitoring (e.g., daily, weekly, or monthly) to estimate PM₁₀ emissions or to evaluate dust control compliance.     

Learning affects host discrimination behavior in a parasitoid wasp

Learning is generally predicted not to be important in host discrimination by parasitoids, because the stimuli involved are less variable than those used in habitat location. However, Anaphes victus (Hymenoptera: Mymaridae), an egg parasitoid of Listronotus oregonensis (Coleoptera: Curculionidae) apparently learns to associate external pheromones with the presence of a conspecific in a host. In this species, females can reject a parasitized host either after antennal drumming (antennal rejection) or after the insertion of their ovipositor (sting rejection). When they encountered a series of parasitized hosts, females A. victus learned to associate the presence of the external pheromone with the presence of the internal one. Learning lasted less than 4 h and occurred earlier in a series when the female marking the egg and the one detecting that mark were close relatives. This behavior could be adaptive because antennal rejection is faster than sting rejection. Received: 11 March 1997 / Accepted after revision: 30 August 1997     

Larval salivary glands are a source of primer and releaser pheromone in honey bee (Apis mellifera L.)

A brood pheromone identified in honeybee larvae has primer and releaser pheromone effects on adult bees. Using gas chromatography–mass spectrometry (GC–MS) to evaluate fatty acid esters—the pheromonal compounds—in different parts of the larvae, we have localized the source of the esters as the larval salivary glands. A histochemical study describes the glands and confirms the presence of lipids in the glands. Epithelial cells of the gland likely secrete the fatty acids into the lumen of the gland. These results demonstrate the salivary glands to be a reservoir of esters, components of brood pheromone, in honeybee larvae.     

Urban tinkering

Cities are currently experiencing serious, multifaceted impacts from global environmental change, especially climate change, and the degree to which they will need to cope with and adapt to such challenges will continue to increase. A complex systems approach inspired by evolutionary theory can inform strategies for policies and interventions to deal with growing urban vulnerabilities. Such an approach would guide the design of new (and redesign of existing) urban structures, while promoting innovative integration of grey, green and blue infrastructure in service of environmental and health objectives. Moreover, it would contribute to more flexible, effective policies for urban management and the use of urban space. Four decades ago, in a seminal paper in Science, the French evolutionary biologist and philosopher Francois Jacob noted that evolution differs significantly in its characteristic modes of action from processes that are designed and engineered de novo (Jacob in Science 196(4295):1161–1166, 1977). He labeled the evolutionary process “tinkering”, recognizing its foundation in the modification and molding of existing traits and forms, with occasional dramatic shifts in function in the context of changing conditions. This contrasts greatly with conventional engineering and design approaches that apply tailor-made materials and tools to achieve well-defined functions that are specified a priori. We here propose that urban tinkering is the application of evolutionary thinking to urban design, engineering, ecological restoration, management and governance. We define urban tinkering as:

A mode of operation, encompassing policy, planning and management processes, that seeks to transform the use of existing and design of new urban systems in ways that diversify their functions, anticipate new uses and enhance adaptability, to better meet the social, economic and ecological needs of cities under conditions of deep uncertainty about the future.

This approach has the potential to substantially complement and augment conventional urban development, replacing predictability, linearity and monofunctional design with anticipation of uncertainty and non-linearity and design for multiple, potentially shifting functions. Urban tinkering can function by promoting a diversity of small-scale urban experiments that, in aggregate, lead to large-scale often playful innovative solutions to the problems of sustainable development. Moreover, the tinkering approach is naturally suited to exploring multi-functional uses and approaches (e.g., bricolage) for new and existing urban structures and policies through collaborative engagement and analysis. It is thus well worth exploring as a means of delivering co-benefits for environment and human health and wellbeing. Indeed, urban tinkering has close ties to systems approaches, which often are recognized as critical to sustainable development. We believe this concept can help forge much-closer, much-needed ties among engineers, architects, evolutionary ecologists, health specialists, and numerous other urban stakeholders in developing innovative, widely beneficial solutions for society and contribute to successful implementation of SDG11 and the New Urban Agenda.

     

Is atmospheric oxidation capacity better in indicating tropospheric O3 formation?

● This study summarizes and evaluates different approaches that indicate O₃ formation. ● Isopleth and sensitivity methods are useful but have many prerequisites. ● AOC is a better indicator of photochemical reactions leading to O₃ formation. Tropospheric ozone (O₃) concentration is increasing in China along with dramatic changes in precursor emissions and meteorological conditions, adversely affecting human health and ecosystems. O₃ is formed from the complex nonlinear photochemical reactions from nitrogen oxides (NO_x = NO + NO₂) and volatile organic compounds (VOCs). Although the mechanism of O₃ formation is rather clear, describing and analyzing its changes and formation potential at fine spatial and temporal resolution is still a challenge today. In this study, we briefly summarized and evaluated different approaches that indicate O₃ formation regimes. We identify that atmospheric oxidation capacity (AOC) is a better indicator of photochemical reactions leading to the formation of O₃ and other secondary pollutants. Results show that AOC has a prominent positive relationship to O₃ in the major city clusters in China, with a goodness of fit (R²) up to 0.6. This outcome provides a novel perspective in characterizing O₃ formation and has significant implications for formulating control strategies of secondary pollutants.     

An empirical analysis of air pollution dose-response curves

The authors combine information from 2 million death certificates and 2 million observations from the Public Use Sample. With several strategies for controlling extraneous variation, the authors explore these data in order to measure the chronic effects of several air pollutants on white mortality rates. In the United States, approximately 140,000 deaths a year (Wo of all deaths) may be associated with air pollution. The size of this effect increases dramatically with age, with children displaying no detectable associations. Some pollutants, especially sulfate, are closely associated with many deaths, whereas other pollutants, especially ozone and nitrogen dioxide, have no apparent effect on expected lifetimes.