Toxicity and bioaccumulation of copper in three green microalgal species

The effective concentrations of copper on the inhibition of the growth of Scenedesmus obliquus, Chlorella pyrenoidosa and Closterium lunula at 96 h (96 h EC50) were determined to be 50, 68 and 200 microg/l, respectively. The low initial bioaccumulation of Cu by C. lunula was found to be responsible for its tolerance to Cu. The amount of Cu accumulated by all three microalgae reached the maximum value and decreased quickly after the peak followed by a slow decrease over the next 6 d. Bioaccumulation of Cu by C. lunula was directly proportional to the initial Cu concentration. After reaching the first peak after 1 d, the bioconcentration factor of Cu by microalgae declined to its minimum value during the exponential growth phase but increased in the stationary growth phase again. This indicates that desorption of Cu from microalgae was higher during the exponential growth phase but lower in the stationary growth phase. Smaller microalgae with low 96 h EC50 values are more efficient in removing Cu from wastewater.     

Bacteria transport and deposition under unsaturated conditions: the role of the matrix grain size and the bacteria surface protein

Unsaturated (80% water saturated) packed column experiments were conducted to investigate the influence of grain size distribution and bacteria surface macromolecules on bacteria (Rhodococcus rhodochrous) transport and deposition mechanisms. Three sizes of silica sands were used in these transport experiments, and their median grain sizes were 607, 567, and 330 microm. The amount of retained bacteria increased with decreasing sand size, and most of the deposited bacteria were found adjacent to the column inlet. The deposition profiles were not consistent with predictions based on classical filtration theory. The experimental data could be accurately characterized using a mathematical model that accounted for first-order attachment, detachment, and time and depth-dependent straining processes. Visual observations of the bacteria deposition as well as mathematical modelling indicated that straining was the dominant mechanism of deposition in these sands (78-99.6% of the deposited bacteria), which may have been enhanced due to the tendency of this bacterium to form aggregates. An additional unsaturated experiment was conducted to better deduce the role of bacteria surface macromolecules on attachment and straining processes. In this case, the bacteria surface was treated using a proteolitic enzyme. This technique was assessed by examining the Fourier-transform infrared spectrum and hydrophobicity of untreated and enzyme treated cells. Both of these analytical procedures demonstrated that this enzymatic treatment removed the surface proteins and/or associated macromolecules. Transport and modelling studies conducted with the enzyme treated bacteria, revealed a decrease in attachment, but that straining was not significantly affected by this treatment.     

The occurrence of xenoestrogens in the Elbe river and the North Sea

The xenoestrogens Bisphenol A (BPA), p-alkylphenols and p-alkylphenol ethoxylates were determined in water samples of the North Sea, the Elbe river, and its tributaries Schwarze Elster, Mulde, Saale and the Weisse Elster. The sampling sites of the Elbe river reached from Schmilka at the German-Czech border to Cuxhaven at the estuary. Samples of the North Sea were taken in the German Bight. Additionally, freshly deposed sediments of the River Elbe and its tributaries were analyzed. Partitioning coefficients of these compounds for the distribution between suspended particulate matter (SPM) and the aqueous phase were calculated for samples of the River Elbe at sampling site Geesthacht. The analytical procedure consisted of liquid-liquid extractions of the acidified water samples using dichloromethane. Sediments and SPM samples were extracted by Accelerated Solvent Extraction with n-hexane/acetone. Following a clean-up by HPLC, the analytes were derivatized with heptafluorobutyric acid anhydride and quantified using GC-MSD. The concentration ranges of the compounds analyzed in water samples of the Elbe river were as follows (in ng l(-1)): BPA 9-776, alkylphenols 10-221 and alkylphenol ethoxylates 18-302. In sediment samples the concentrations were (in microg kg(-1) dry mass): BPA 66-343, alkylphenols 17-1378 and alkylphenol ethoxylates 30-1797. In samples of the North Sea the concentrations were generally about 1 order of magnitude lower. As shown by the concentration profiles following the River Elbe into the North Sea, the Elbe river must be considered as a major pollution source for the North Sea concerning the compounds analyzed. The SPM/water-partitioning coefficients calculated (mean values) amounted to: BPA 4.50, alkylphenols 5.52-5.58 and alkylphenol ethoxylates 5.60-6.38. A comparison of the results with data from other surface waters showed that concentrations of these xenoestrogens in the River Elbe and its tributaries were relatively low. The evaluation of the data based on the lowest observable effect concentration (LOEC) for alkylphenols (endpoint: vitellogenin synthesis in male trout) indicated that the concentrations were well below the effectivity threshold.     

Distribution of pesticides and heavy metals in trophic chain

Determination of triazines herbicides (atrazine and simazine) by high performance liquid chromatography (HPLC) in samples of trophic chain were worked out. Determination limits of 0.5 μg g⁻¹ for atrazine, 0.8 μg g⁻¹ for simazine with pesticides recovery of 70–77% in trophic chain samples were obtained. The content of simazine in soils was in range 1.72–57.89 μg g⁻¹, in grass 5–88 μg g⁻¹, in milk 2.32–15.29 μg g⁻¹, in cereals 10.98–387 μg g⁻¹, in eggs 30.14–59.48 μg g⁻¹, for fruits: 2.45–6.19 μg g⁻¹. The content of atrazine in soils was in range 0.69–19.59 μg g⁻¹, in grass 7.85–23.85 μg g⁻¹, in cereals 1.88–43.08 μg g⁻¹. Cadmium, lead and zinc were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) in the same samples as atrazine and simazine. Determination limits for cadmium 5 × 10⁻³ μg g⁻¹, for lead 1 × 10⁻² μg g⁻¹, and for zinc 0.2 × 10⁻³ μg g⁻¹, were obtained. The content of cadmium in soil was in range 0.13–5.89 μg g⁻¹, in grass 114–627.72 × 10⁻³ μg g⁻¹, in milk 8.88–61.88 × 10⁻³ μg g⁻¹, in cereals 0.20–0.31 μg g⁻¹, in eggs 0.11–0.15 μg g⁻¹, in fruits 0.23–0.59 μg g⁻¹. The content of lead in soils was in range 0.57–151.50 μg g⁻¹, in grass 0.16–136.57 μg g⁻¹, in milk 1.16–3.74 μg g⁻¹, in cereals 1.05–5.47 μg g⁻¹, in eggs 5.79–55.87 μg g⁻¹, in fruits 21.00–87.36 μg g⁻¹. Zinc content in soil was in range 9.15–424.5 μg g⁻¹, in grass 35.20–55.87 μg g⁻¹, in milk 20.00–34.38 μg g⁻¹, in cereals 14.94–28.78 μg g⁻¹, in eggs 15.67–32.01 μg g⁻¹, in fruits 14.94–18.88 μg g⁻¹.

Described below extraction and mineralization methods for particular trophic chains allowed to determine of atrazine, simazine, cadmium, lead and zinc with good repeatability and precision. Emphasis was focused on liquid–liquid extraction and solid-phase extraction of atrazine and simazine from analysed materials, as well as, on monitoring the content of herbicides and metals in soil and along trophic chain. Higher concentration of pesticides in samples from west region of Poland in comparison to that of east region is likely related to common applying them in Western Europe in relation to East Europe. The content of metals strongly depends on samples origin (industry area, vicinity of motorways).     

Higher pH and faster decomposition in biowaste composting by increased aeration

Composting of source separated municipal biowaste has at several plants in Scandinavia been hampered by low pH. In this study the hypothesis that increased aeration would improve the process was tested in full-scale experiments at two large composting plants. The O2 concentrations were high (>15%) even at the low aeration rates, so the prevailing low pH was not due to an anaerobic process environment. In spite of this, increased aeration rates at the start of the process resulted in higher microbial activity, increased pH and a more stable compost product. At one plant the decomposition rate varied in proportion to the aeration rate, to the extent that the temperatures and O2 concentrations were similar during the early processes even though aeration rates varied between 10 and 50 m3/(h, m3 compost). However, increased aeration caused severe drying of the compost, but at one plant the addition of water was adequate to prevent drying. In conclusion, by increasing the aeration rates and adding water to compensate for drying, it was possible to shorten the time needed to produce a stable compost product and thus to increase the efficiency of the composting plants.     

Control of GHG emission at the microbial community level

All organic material eventually is decomposed by microorganisms, and considerable amounts of C and N end up as gaseous metabolites. The emissions of greenhouse relevant gases like carbon dioxide, methane and nitrous oxides largely depend on physico-chemical conditions like substrate quality or the redox potential of the habitat. Manipulating these conditions has a great potential for reducing greenhouse gas emissions. Such options are known from farm and waste management, as well as from wastewater treatment. In this paper examples are given how greenhouse gas production might be reduced by regulating microbial processes. Biogas production from manure, organic wastes, and landfills are given as examples how methanisation may be used to save fossil fuel. Methane oxidation, on the other hand, might alleviate the problem of methane already produced, or the conversion of aerobic wastewater treatment to anaerobic nitrogen elimination through the anaerobic ammonium oxidation process might reduce N2O release to the atmosphere. Changing the diet of ruminants, altering soil water potentials or a change of waste collection systems are other measures that affect microbial activities and that might contribute to a reduction of carbon dioxide equivalents being emitted to the atmosphere.     

Antibiotic losses in leaching and surface runoff from manure-amended agricultural land

A 3-yr field study quantified leaching and runoff losses of antibiotics from land application of liquid hog (chlortetracycline and tylosin) and solid beef (chlortetracycline, monensin, and tylosin) manures under chisel plowing and no-tillage systems. The study was conducted in southwestern Wisconsin, a karst area with steep, shallow, macroporous soils. Relative mass losses of chlortetracycline, monensin, and tylosin were <5% of the total amount applied with manure. Chlortetracycline was only detected in runoff, whereas monensin and tylosin were detected in leachate and runoff. Highest concentrations of monensin and tylosin in the leachate were 40.9 and 1.2 microg L(-1), respectively. Highest chlortetracycline, monensin, and tylosin concentrations in runoff were 0.5, 57.5, and 6.0 microg L(-1), respectively. For all three antibiotics, >90% of detections and 99% of losses occurred during the non-growing season due to fall manure application and slow degradation of antibiotics at cold temperatures. During years of high snowmelt, runoff accounted for nearly 100% of antibiotic losses, whereas during years of minimal snowmelt, runoff accounted for approximately 40% of antibiotic losses. Antibiotic losses were generally higher from the no-tillage compared with chisel plow treatment due to greater water percolation as a result of macroporosity and greater runoff due to lack of surface roughness in the no-tillage plots during the non-growing season. The results from this study suggest that small quantities of dissolved antibiotics could potentially reach surface and ground waters in the Upper Midwestern USA from manure-amended shallow macroporous soils underlain with fractured bedrock.     

Long-term development of inorganic nutrients and chlorophyll alpha in the open northern Baltic Sea

Eutrophication is an ongoing process in most parts of the Baltic Sea. This article reports on the changes during recent decades of several eutrophication-related variables in the open sea areas surrounding Finland (wintertime nutrient concentrations, wintertime nutrient ratios, and summer time chlorophyll alpha concentrations at the surface). The sum of nitrate- and nitrite-nitrogen ([NO3+NO2]-N) was observed to increase nearly fourfold in the Northern Baltic Proper and the Gulf of Finland and almost double in the Bothnian Sea from the 1960s until the 1980s or 1990s. The increase was followed by a decrease, which was modest in the two former subregions. Phosphate-phosphorus (PO4-P) concentrations followed a similar pattern in the Northern Baltic Proper (threefold increase and subsequent slight decrease) and Bothnian Sea (30% increase and subsequent decrease), but increased throughout the study in the Gulf of Finland, with the present concentration being threefold to the measurements made in the early 1970s. The PO4-P concentration decreased throughout the study in the Bothnian Bay. Silicate-silicon (SiO4-Si) concentrations decreased 30-50% from the early 1970s to the late 1990s and increased 20-40% thereafter in the Northern Baltic Proper, the Gulf of Finland, and the Bothnian Sea. Chlorophyll alpha showed an increase of over 150% in the Northern Baltic Proper and the Gulf of Finland from the 1970s until the early 2000s. In the Bothnian Sea the chlorophyll alpha concentration increased more than 180% from the late 1970s until the late 1990s, and decreased thereafter. According to these long-term observations, the Gulf of Finland and Northern Baltic Proper show clear signs of eutrophication, which may be emphasized by hydrographical changes affecting the phytoplankton communities and thus the algal biomass.     

Comparative study of chromium biosorption by red, green and brown seaweed biomass

Dried biomass of the macroalgae Fucus vesiculosus and Fucus spiralis (brown), Ulva spp. (comprising Ulva linza, Ulva compressa and Ulva intestinalis) and Ulva lactuca (green), Palmaria palmata and Polysiphonia lanosa (red) were studied in terms of their chromium biosorption performance. Metal sorption was highly pH dependent with maximum Cr(III) and Cr(VI) sorption occurring at pH 4.5 and pH 2, respectively. Extended equilibrium times were required for Cr(VI) binding over Cr(III) binding (180 and 120min, respectively) thus indicating possible disparities in binding mechanism between chromium oxidation states. The red seaweed P. palmata revealed the highest removal efficiency for both Cr(III) and Cr(VI) at low initial concentrations. However, at high initial metal concentrations F. vesiculosus had the greatest removal efficiency for Cr(III) and performed almost identically to P. lanosa in terms of Cr(VI) removal. The Langmuir Isotherm mathematically described chromium binding to the seaweeds where F. vesiculosus had the largest q(max) for Cr(III) sorption (1.21mmol g(-1)) and P. lanosa had the largest Cr(VI) uptake (0.88mmol g(-1)). P. palmata had the highest affinity for both Cr(III) and Cr(VI) binding with b values of 4.94mM(-1) and 8.64mM(-1), respectively. Fourier transform infrared analysis revealed interactions of amino, carboxyl, sulphonate and hydroxyl groups in chromium binding to Ulva spp. The remaining seaweeds showed involvement of these groups to varying degrees as well as ether group participation in the brown seaweeds and for Cr(VI) binding to the red seaweeds.     

Polychlorinated biphenyls (PCBs) and hydroxy-PCBs in adipose tissue of women in Southeast Spain

Polychlorinated biphenyls (PCBs) and hydroxylated PCBs (OH-PCBs) were investigated in human adipose tissue samples collected from 20 women undergoing surgery. Mean sum of PCB and sum of OH-PCB levels were 737ng/g of lipid and 8pg/g of lipid, respectively. Among PCBs, congeners 180, 153, 138 and 170 were the most frequent and abundant, and together constituted 72% of the total amount of PCBs in adipose tissue. The PCB congener pattern and the frequencies and concentrations of non-dioxin-like and non-hydroxylated congeners observed in adipose tissue were similar in distribution and order of magnitude to the profile previously published in Spain but lower than that found in other European countries. Among OH-PCB congeners studied, 4-OH-PCB 107/118 was found at the highest concentrations followed by 3'-OH-PCB 180 and 3-OH-PCB 138. To date, no information on levels of PCB metabolites in the Spanish population is available for comparison. These three predominant OH-PCBs contributed 97% of all OH-PCBs. Twelve dioxin-like PCBs contributed around 8% of the total PCB exposure, and all were present in all study subjects. Further research is required to determine trends in human exposure to PCBs and OH-PCBs and how existing banning measures affect exposure.