An Experimental Study on Productivity and Quality Improvement of Horizontal Continuous Casting Process

The aim of the current work is to provide information on how to improve the productivity and quality in the Horizontal Continuous Casting process (HCC). After a first numerical 2D/3D survey about the solidification in the HCC, an experimental investigation has been carried out to validate numerical results. Some casting parameters have been measured and collected: inlet and outlet temperatures, flow rate, heat flux and casting temperature. The study results lead to a correlation between these casting parameters and the casting quality. To obtain the best quality for each alloy, a set of operating parameters has been proposed. There is a very good agreement between the current results and earlier numerical results. Also based on the results, one can gain an insight on the productions of each casting machine and the grades of its quality.     

Extraction of Lignosulfonate from Black Liquor into Construction of a Magnetic Lignosulfonate-Based Adsorbent and Its Adsorption Properties for Dyes from Aqueous Solutions

Journal of Polymers and the Environment - Lignosulfonate, one of the lignin derivatives, was extracted from the black liquor as a byproduct of the wood and paper industry. It was used to prepare...     

Assessment of food-energy-environmental pollution nexus in Iran: the nonlinear approach

Environmental Science and Pollution Research - Iran’s agricultural production has expanded significantly in recent years. Environmental pollution caused by the use of energy and chemical...     

Detection of SARS-CoV-2 in the indoor air of intensive care unit (ICU) for severe COVID-19 patients and its surroundings: considering the role of environmental conditions

Environmental Science and Pollution Research - There is ambiguity about the airborne transmission of the SARS-CoV-2. While a distance of 6 feet is considered a safe physical distance, new findings...     

Estimation of bacteriological levels in surface water samples to evaluate their contamination profile

The present work deals with the assessment of bacteriological contamination along with some physico-chemical parameters of water samples from Lahore canal. ANOVA showed that the observed p values of log-transformed viable plate counts, total suspended solids, turbidity, and biological oxygen demand are 0.000, 0.000, 0.000, and 0.000, respectively, which are <0.05, while the p value of total coliforms, total fecal coliforms, and Escherichia coli are 0.728, 0.827, and 0.081, respectively which are >0.05. Significant correlation was observed between log-transformed viable plate counts (CFU), biological oxygen demand, total suspended solids, and turbidity. Further regression analysis revealed that simple line regression model is fit for log-transformed viable plate counts and total suspended solids, log-transformed viable plate counts and turbidity, turbidity and total suspended solids, biological oxygen demand and total suspended solids, biological oxygen demand and log-transformed viable plate counts, and biological oxygen demand and turbidity.     

Effects of physicochemical factors on PAH degradation by Planomicrobium alkanoclasticum

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants that are mutagenic, carcinogenic, and toxic to living organisms. Here, the ability and effectiveness of selected bacteria isolated from an oil‐contaminated area in biodegrading PAHs were evaluated, and the optimal conditions conducive to bacterial PAH biodegradation were determined. Of six bacterial isolates identified based on their 16S rRNA sequences, Planomicrobium alkanoclasticum could subsist on and consume nearly all hydrocarbons according to the 2,6‐dichlorophenolindophenol assay. The efficacy of this isolate at PAH biodegradation was then empirically confirmed. After 30 days of incubation, P. alkanoclasticum degraded 90.8% of the 16 PAH compounds analyzed and fully degraded eight of them. The optimum P. alkanoclasticum growth conditions were 35°C, pH 7.5, and NaNO₃ as the nitrogen source. Under these biostimulant conditions, P. alkanoclasticum degraded 91.4% of the total PAH concentration and completely decomposed seven PAHs after 15 days incubation. Hence, P. alkanoclasticum is an apt candidate for the biodegradation of PAHs and the bioremediation of sites contaminated by them.     

Performance of biotic indices in comparison to chemical-based Water Quality Index (WQI) in evaluating the water quality of urban river

In order to evaluate the water quality of one of the most polluted urban river in Malaysia, the Penchala River, performance of eight biotic indices, Biomonitoring Working Party (BMWP), BMWP^Thai, BMWP^Viet, Average Score Per Taxon (ASPT), ASPT^Thai, BMWP^Viet, Family Biotic Index (FBI), and Singapore Biotic Index (SingScore), was compared. The water quality categorization based on these biotic indices was then compared with the categorization of Malaysian Water Quality Index (WQI) derived from measurements of six water physicochemical parameters (pH, BOD, COD, NH₃-N, DO, and TSS). The river was divided into four sections: upstream section (recreational area), middle stream 1 (residential area), middle stream 2 (commercial area), and downstream. Abundance and diversity of the macroinvertebrates were the highest in the upstream section (407 individual and H′?=?1.56, respectively), followed by the middle stream 1 (356 individual and H′?=?0.82). The least abundance was recorded in the downstream section (214 individual). Among all biotic indices, BMWP was the most reliable in evaluating the water quality of this urban river as their classifications were comparable to the WQI. BMWPs in this study have strong relationships with dissolved oxygen (DO) content. Our results demonstrated that the biotic indices were more sensitive towards organic pollution than the WQI. BMWP indices especially BMWP^Viet were the most reliable and could be adopted along with the WQI for assessment of water quality in urban rivers.     

Assessment of hospitalization and mortality from exposure to PM10 using AirQ modeling in Ilam,Iran

Environmental Science and Pollution Research - The aims of this study were to assess the health impact of PM10 on inhabitants and to investigate the trend of PM10 concentrations in Ilam, Iran, from...     

Phosphogypsum Waste Used as Reinforcing Fillers in Polypropylene Based Composites: Structural,Mechanical and Thermal Properties

The industrial production of wet phosphoric acid in Morocco led to controversial stockpiling of waste phosphogypsum by-products resulting in the release of significant amounts of toxic impurities in salt marshes. In the framework of fighting against global climate change and efforts to reduce toxic industrial wastes (phosphate industry), this work presents a new polymer composite based on phosphogypsum (PhG) and polypropylene (PP).The compounds were produced by twin-screw extrusion and injection molding. The morphological results show that good affinity between PhG and PP led to good particle dispersion/distribution in the polymer matrix. Thermal characterizations showed that PhG particles improved the thermal stability of PP with a 50 °C increase at 40 wt%. The optimum tensile modulus was also obtained at 40 wt% with a 74 % increase over neat PP. Dynamical mechanical analysis showed that PhG addition can improve the viscoelastic properties of PP for potential applications under dynamic stress. Overall, it can be concluded that PhG is potential reinforcing filler for the production of PP composites and represents a promising avenue for the valorization of this waste as a new raw material while resolving some environmental issues.