Engine Performance and Emission Characteristics of Plastic Oil Produced from Waste Polyethylene and Its Blends with Diesel Fuel

The overall objective of this study was to explore the utility of waste plastics as a potential source of diesel fuel. An experimental study was conducted to evaluate the use of various blends of plastic oil produced from waste polyethylene (WPE) with diesel fuel (D). WPE was degraded thermally and catalytically using sodium aluminum silicate as a catalyst. The oil collected at optimum conditions (414°C–480°C range and 1 h reaction time) was fractionated at different temperatures and fuel properties of the fractions were measured. Plastic oil was blended with diesel fuel at the volumetric ratios of 5%, 10%, 15%, 20%, and 100%. Fuel properties of blends are found comparable with those of diesel fuel within the EN 590 Diesel Fuel standard and they can also be used as fuel in compression ignition engines without any modification. Engine performance and exhaust emission studies of 5% WPE-D (WPE5) blend were performed. Experimental results showed that carbon monoxide (CO) emission is decreased by 20.63%, carbon dioxide (CO₂) emission is increased by 3.34%, and oxides of nitrogen (NO_x) emission is increased by 9.17% with WPE-D (WPE5) blend compared to diesel fuel.     

Recent improvements in oily wastewater treatment: Progress, challenges, and future opportunities

Oily wastewater poses significant threats to the soil, water, air and human beings because of the hazardous nature of its oil contents. The objective of this review paper is to highlight the current and recently developed methods for oily wastewater treatment through which contaminants such as oil, fats, grease, and inorganics can be removed for safe applications. These include electrochemical treatment, membrane filtration, biological treatment, hybrid technologies, use of biosurfactants, treatment via vacuum ultraviolet radiation, and destabilization of emulsions through the use of zeolites and other natural minerals. This review encompasses innovative and novel approaches to oily wastewater treatment and provides scientific background for future work that will be aimed at reducing the adverse impact of the discharge of oily wastewater into the environment. The current challenges affecting the optimal performance of oily wastewater treatment methods and opportunities for future research development in this field are also discussed.     

Bromate formation on the non-porous TiO2 photoanode in the photoelectrocatalytic system

The increasing use of ozone in water disinfection processes has been the focus of considerable concern in regards to inorganic disinfection by product formation of bromate in waters containing bromide. Due to the public health risk caused by the presence of bromate as a suspected carcinogen, attention had been addressed to the conditions under which bromate is formed. In this study, photoanodic bromine generation and bromate (BrO(3)(-)) formation were investigated using a TiO(2) electrode in a photoelectrocatalytic (PEC) treatment process. The separation of anodic and cathodic reactions in the PEC system resulted in a pH decrease from 9.3 to 3.0 in the photoanode compartment and an increase to 11.0 in the cathode compartment. Under a photo-illumination intensity of 5.7 m W cm(-2) UV, a biasing potential of +1.0V vs SCE, a pH of 6.0 and at a NaBr concentration of 1.0 x 10(-2) M, active bromine formation increased over time with 2.4 x 10(-6) M min(-6) rate and reached a steady-state concentration of 1.44 x 10(-4) M in 60 min. Bromate formation was detected after a lag-period of 15 min and exhibited a continuous increasing trend with respect to irradiation time. No bromate formation was observed below pH 6.5 whereas an increasing bromate concentrations and pH up to pH=8.5 were noted.     

Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

Decision support model to select crop pattern for sustainable agricultural practices using fuzzy MCDM

The crop pattern has a significant impact on the feasibility of sustainable agricultural practices. Selected crop pattern influences environmental and economic condition and affects sustainability profoundly in agricultural practices. Hence, a careful intervention is required in the selection of an optimal crop pattern for sustainable agricultural practices. Selection of a particular set of crop pattern depends on many criteria that may vary from place to place thus pose challenges in deciding an optimum crop pattern. The present research focuses on the crop selection pattern in Indian environment that considers comprehensive criteria related to sustainable farming practices. Based on the in-depth review of the literature and experts opinion, comprehensive criteria related to sustainable farming practices for Ravi season crop are identified. Total twelve criteria covering socioeconomic conditions, soil and water conditions, environmental and climatic conditions are earmarked and taken into account for eight most commonly grown crops in Ravi season and later on modeled to determine the crop pattern for most needed sustainability. A fuzzy-based multi-criteria decision-making model has been developed considering the Indian farming system. The scarce resources availability to Indian farmers poses many challenges to practice farming with most needed sustainability. The present research will be useful in the area of Indian farming practices in particular and global farming practices in general. It will also help stakeholders in their cost effective decision making for better crop productivity leading to sustainable farming practices. Additionally, the state policy makers will be able to formulate effective state driven sustainable farming policy to enhance its stake in gross domestic product to become self-reliance.     

The effects of alginate microspheres on phytoremediation and growth of Lemna minor in the presence of Cd

Today, the removal of increased amount of contaminant concentrations in nature such as metals, nanoparticles, has become an essential issue to struggle with. In this paper, both the toxic effects of non-essential Cd on Lemna minor in presence of alginate microspheres and metal removal capacity of Cd-exposed L. minor and microspheres were investigated. Three test groups were constructed: group (L) containing Lemna, group (M) containing alginate microsphere and group (L?+?M) containing alginate microsphere and Lemna. Five different levels of Cd concentrations were added into these groups. Estimation models were constructed to estimate Cd removal capacities of L. minor and microspheres, and time-concentration-dependent growth (GRC) rates of both microsphere-containing and non-containing groups were modelled by regression analysis. It was seen that microspheres alone only had no positive or negative effects on Lemna growth. It was observed that, for all test groups the time-dependent growth rate has both increase–decrease trends in general. The toxicity effect of Cd on Lemna growth was reduced by adding microspheres into medium. Furthermore, the results stated that test groups containing only microspheres (M, 0–97.56%) and consortium groups (M?+?L, 0–98.26%) were slightly more successful in Cd removal process compared to Lemna (L) groups (L, 0–97.32%).     

Carbon dioxide sequestration of iron ore mining waste under low-reaction condition of a direct mineral carbonation process

Environmental Science and Pollution Research - Mining waste that is rich in iron-, calcium- and magnesium-bearing minerals can be a potential feedstock for sequestering CO2 by mineral carbonation....     

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu(2+) and Ni(2+) from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5-100mg/L. The pH of the solutions containing either Cu(2+) or Ni(2+) was varied over a range of 2-8. The adsorption of Cu(2+) and Ni(+2) on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu(2+) and 14.5mg/g for Ni(2+) at 298 K when the initial concentration for both Cu(2+) and Ni(2+) was 100mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.     

Assessment of the Water Quality of Troia for the Multipurpose Usages

The aim of this study was to determine the origin and quality of waters in Troia. For this purpose total of 25 water samples including 2 springs, 14 surfaces and 9 groundwaters, were collected at eight different times. Global positioning system (GPS) was used to determine to coordinates of sampling points. The concentration of 6 minor elements (B, Cu, F, Fe, Pb and Zn), 9 major anions and cations (Na(+), Ca(2+), K(+), Mg(2+), SO(4)(2-), PO(4)(3-), HCO(3)(-), Cl(-) and, CO(3)(2-)) were determined by spectrometric, colorimetric and volumetric methods. Water pH, EC, DO, ORP and TDS were measured in situ using probes. The data showed that the concentrations of most of minor elements were below the EPA and TSE limits except Pb which ranged between 0.001 and 4.832 mg L(-1). Statistically significant relationships (P<0.01 and r>0.70) were observed between Fe and Cu, Cu and K(+), Cu and Ca(2+), B and Na(+), Na(+) and K(+). Assessing the water based on irrigation using Wilcox model showed that some well waters were not suitable for irrigation. Troia water was found to be highly corrosive and the average corrosion coefficients varied from 0.5 to 4.6. According to the Piper and Schoeller diagrams results, the water in Troia was classified as mixed water type.