Effects of herbicides on Odonata communities in a rice agroecosystem

The effects of the five herbicides propanil, quinclorac, molinate/propanil, 2,4-D amine, and bensulfuron on Odonata diversity and abundance at the experimental rice plots was investigated. A total of 13 Odonata morphospecies belonging to two families have been identified. Treated plots exhibited higher species richness (up to 12 species) than the control plot (8 species). Ishnura spp. was the most abundant species in the treated plots with a mean density of 194.2 individuals per m², (ind m^?2) followed by Brachythemis contaminata (152 ind m^?2) and Agriocnemis spp. (124 ind m^?2). In the control plots, Agrocnemis spp. was the dominant species (153 ind m^?2) followed by Ishnura spp. (143 ind m^?2) and Neurothemis fluctuans (59 ind m^?2). In the propanil-treated plot, the highest number of odonate species (10 species) was recorded followed by the plots treated with quinclorax and molinate/propanil (9 species). On the 2,4-D amine or bensulfuron-treated plots as well as the control plot, only eight odonate species were recorded. This study revealed that herbicide application had a positive effect on Odonata diversity. This seems reasonable as Odonata are non-target organisms for herbicides. Furthermore, the decomposed weeds resulting from herbicide application would enrich the water with necessary organic matter.     

Synthesis and pharmacological properties of certain analogs of pilocarpine

The synthesis of 4‐(4'‐pyrimidinylmethyl)oxacyclohexan‐2‐one (2a) and 4‐(4'‐pyrimidinylmethyl)oxacycloheptan‐2‐one (3a) were achieved through the Michael addition of the anion derived from 4‐methylpyrimidine with oxacyclyo‐3‐hexen‐2‐one and oxacyclo‐3‐hepten‐2‐one respectively. These compounds 2a and 3a and their quaternary methiodide salts lack cholinomimetic activity.     

Study of Thermal Decomposition Kinetics of Palm Oleic Acid-Based Alkyds and Effect of Oil Length on Thermal Stability

Thermal decomposition kinetics of three palm oleic acid-based alkyds with different oil lengths and having different molecular weights were studied using TGA measurements under non-isothermal conditions. Activation energies were obtained from Kissinger and Ozawa, Flynn and Wall (OFW) methods and subsequently the pre-exponential factor, A, degradation rate constant, k, for all the alkyds were also determined. From kinetic analysis of the thermal decomposition using the OFW method, it was found that degradation of all the alkyds has taken place in more than two stages, corresponding to different mechanisms. As shown from Ozawa and Kissinger methods, the chemical composition of the alkyds influenced the thermal degradation; increasing the phthalic anhydride and glycerol, and decreasing the oleic acid increased the thermal stabilities of the alkyds.     

Biosurfactant electrospun nanofibers exhibit minimal side effects on the structure and function of the liver tissue in male rat model

Environmental Science and Pollution Research - Oil spills can result in significant damage to marine estuaries, rivers, lakes, wetlands, and shorelines. Electrospun nanofibers containing...     

Organismic-level acute toxicology profiling of reactive azo dyes

In the present study, organismic-level acute toxicology profile of three reactive azo dyes, viz. Reactive Blue 221, Reactive Red 195, and Reactive Yellow 145, was investigated, by using bacterial (Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Listeria monocytogenes, and Bacillus subtilis), fungal (Trichoderma asperellum, Aspergillus flavus, Fusarium fujikuroi, and Rhizoctonia solani), plant (Raphanus sativus, Triticum aestivum, Sorghum bicolor, and Phaseolus mungo), and aquatic (Artemia salina and Daphnia magna) specimens. Microbial test organisms (all the six bacteria and two fungi, i.e., T. asperellum and A. flavus) and D. magna were found to be relatively more sensitive towards the reactive azo dyes and their mixture, as the EC50 values were in the range of 80–330, 135–360, and 108–242 ppm for bacteria, fungi, and D. magna, respectively (but the effect was not acutely toxic). Moreover, the effect of dye mixture was comparable tothe individual dyes in almost all the tested microbial specimens. For plant seeds, the dye mixture was found to be relatively more inhibitory towards T. aestivum and R. sativus than the individual dyes. For S. bicolor and P. mungo seeds, the effect of the dye mixture was almost identical to the individual dyes. However, in all cases, EC50 values were in the range of 950–3500 ppm, which indicates a non-toxic effect on plant seed germination potential. Likewise, the dyes and their mixture were not acutely toxic for Artemia salina larvae (more sensitive to the dye mixture) and Daphnia magna neonates (EC50, 516–950 and 108–242 ppm, respectively).     

Assessments of some metals contamination in lipsticks and their associated health risks to lipstick consumers in Iran

In this study, the concentrations of lead, cadmium, and chromium in lipstick samples were evaluated. The samples were from different brands and produced in different countries. The average lead, cadmium, and chromium concentrations in all lipstick samples were 1.851, 0.017, and 4.300 mg kg^?1 ww, respectively. There was a significant difference in the concentrations of lead, cadmium, and chromium among the brands (p?<?0.05). The concentrations of the measured elements in the brands did not exceed the values of the international standards provided for lipstick. The values of hazard quotient (HQ), health risk index (HI), relative intake index (RII), and estimated daily intake (EDI) indices were calculated. The results of the HQ and HI indices showed that in more than 50% of the lipstick brands, there is a potential threat to consumer health due to the presence of these elements in lipstick. Therefore, it can be concluded that, due to the simultaneous use of lipstick with other types of cosmetics and hence the potential exposure of consumers to toxic elements through all cosmetics, continuous monitoring of the concentrations of these elements in these types of products is necessary to avoid potential health risks.     

A test of environmental Kuznets curve (EKC) for carbon emission and potential of renewable energy to reduce green house gases (GHG) in Malaysia

This study investigates the presence of environmental kuznets curve (EKC) for green house gases (GHG) measured by CO₂ emission in Malaysia for the period 1970 to 2011. The study also examines the potential of the renewable source of energy to contain GHG. The long-run significant positive coefficient of GDP indicates that the GHG are increasing with economic growth while the insignificant coefficient on GDP square rejects the EKC transition. These results indicate a high GDP level for the EKC turning point for Malaysia. Therefore, it can be stated that only economic growth cannot reverse the environmental degradation in Malaysia. The government should have to come up with some policy measures to achieve CO₂ emission reduction targets that Malaysia has pledged to achieve in Paris Submit (2015). The renewable energy production is found to have significant negative effect on CO₂ emission. So government should focus on the renewable source of energy production and should frame a special policy for renewable energy production.     

Preconcentration and determination of lead and cadmium levels in blood samples of adolescent workers consuming smokeless tobacco products in Pakistan

The present study was aimed to evaluate the cadmium (Cd) and lead (Pb) levels in the blood samples of adolescent boys, chewing different smokeless tobacco (SLT) products in Pakistan. For comparative purpose, boys of the same age group (12–15 years), not consumed any SLT products were selected as referents. To determine trace levels of Cd and Pb in blood samples, a preconcentration method, vortex-assisted liquid–liquid microextraction (VLLME) has been developed, prior to analysis by flame atomic absorption spectrometry. The hydrophobic chelates of Cd and Pb with ammonium pyrrolidinedithiocarbamate were extracted into the fine droplets of ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate, while nonionic surfactant, Triton X-114 was used as a dispersing medium. The main factors affecting the recoveries of Cd and Pb, such as concentration of APDC, centrifugation time, volume of IL and TX-114, were investigated in detail. It was also observed that adolescent boys who consumed different SLT products have 2- to 3-fold higher levels of Cd and Pb in their blood samples as compared to referent boys (p?<?0.001).     

Prediction of AMD generation potential in mining waste piles, in the sarcheshmeh porphyry copper deposit, Iran

This study investigates the possibility of acid mine drainage (AMD) generation in active and derelict mine waste piles in Sarcheshmeh Copper Mine produced in several decades, using static tests including acid–base accounting (ABA) and net acid-generating pH (NAGpH). In this study, 51 composite samples were taken from 11 waste heaps, and static ABA and NAGpH tests were carried out on samples. While some piles are acid producing at present and AMD is discharging from the piles, most of them do not show any indication on their AMD potential, and they were investigated to define their acid-producing potential. The analysis of data indicates that eight waste piles are potentially acid generating with net neutralization potentials (NNPs) of ?56.18 to ?199.3, net acid generating of 2.19–3.31, and NPRs from 0.18 to 0.44. Other waste piles exhibited either a very low sulfur, high carbonate content or excess carbonate over sulfur; hence, they are not capable of acid production or they can be considered as weak acid producers. Consistency between results of ABA and NAGpH tests using a variety of classification criteria validates these tests as powerful means for preliminary evaluation of AMD/ARD possibilities in any mining district. It is also concluded that some of the piles with very negative NNPs are capable to produce AMD naturally, and they can be used in heap leaching process for economic recovery of trace amounts of metals without applying any biostimulation methods.     

Novel solid-phase extractor based on functionalization of multi-walled carbon nano tubes with 5-aminosalicylic acid for preconcentration of Pb(II) in water samples prior to determination by ICP-OES

New solid-phase extractor (MWCNTs-5-ASA) was synthesized via covalent immobilization of 5-aminsalicylic acid onto multi-walled carbon nanotubes (MWCNs). The success of the functionalization process was confirmed using Fourier transform infrared spectroscopy, scanning electron microscope, and surface coverage determination. Batch experiments were conducted as a function of pH to explore MWCNTs-5-ASA efficiency to extract several metal ions viz., Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II). It was found that Pb(II) exhibits the highest extraction percentage with maximum adsorption capacity 32.75 mg g^?1. Its binding performance was well fitted with Langmuir sorption isotherm. On the other hand, the selective separation and preconcentration of trace Pb(II) under dynamic conditions prior to determination by inductively coupled plasma-optical emission spectrometry was investigated under different parameters. These included the rate of flow and volume of sample solution, in addition to the type of the eluate, its volume and concentration. The effect of a variety of foreign ions on the recovery percentage was also evaluated. Trace Pb(II) ions present in 500 mL aqueous solution adjusted to pH 4.0 were retained on 50 mg of MWCNTs-5-ASA and completely eluted using 4.0 mL of 2 M HNO₃. The limit of detection and the precision of the method were 0.25 ng mL^?1 and 2.8 %, respectively (N?=?5). This methodology has been applied for the determination of Pb(II) in water samples with good results.