Dechlorination and decomposition of Aroclor 1242 in real waste transformer oil using a nucleophilic material with a modified domestic microwave oven

This research was done to assess the dechlorination and decomposition of polychlorinated biphenyls (PCBs) in real waste transformer oil through a modified domestic microwave oven (MDMW). The influence of microwave power (200–1000 W), reaction time (30–600 s), polyethylene glycol (PEG) (1.5–7.5 g), iron powder (0.3–1.5 g), NaOH (0.3–1.5 g), and H₂O (0.4–2 ml) were investigated on the decomposition efficiency of PCBs existing in real waste transformer oil with MDMW. Obtained data indicate that PEG and NaOH have the greatest influence on decomposition of PCBs; while, iron did not influence, and H₂O decreased, the decomposition efficiency of PCBs. Experimental data also indicated that with the optimum amount of variables through a central composites design method (PEG = 5.34 g, NaOH = 1.17 g, Fe = 0.6 g, H₂O = 0.8 ml and microwave power 800 W), 78 % of PCBs was degraded at a reaction time of about 6 min. In addition, the PCBs decomposition without using water increased up to 100 % in the reactor with the MDMW at 6 min. Accordingly, results showed that MDMW was a very efficient factor for PCBs decomposition from waste transformer oil. Also, using microwave irradiation, availability and inexpensive materials (PEG, NaOH), and iron suggest this method as a fast, effective, and cheap method for PCB decomposition of waste oils.     

Wind Tunnel Simulation of Neutral Atmospheric Surface Layers by the Counter-Jet Technique

A new technique to generate thick turbulent boundary layers In relatively short distances, which is capable of modifying and controlling rapidly the mean and unsteady profiles of the simulated layers, is presented. The increased thickness is achieved in the "I.IT. Environmental Wind Tunnel" by providing large momentum defects at the wall through upstream oriented, spanwise discrete wall jets, with changeable jet velocities and controllable jet angles. Various mean velocity profiles of the boundary layer (which can be represented by a wide range of power law exponents) are obtained at the same streamwise position using different settings of the counter-jet parameters and different types of artificial surface roughness. The transverse uniformity of these layers is also documented. Selected measurements of the flow field in the vicinity of a "building" model tested in three surface layers are compared in order to examine the sensitivity of measured effects to changes in the surface layer characteristics. Viewing the flow field with the aid of the modular flow concept, changes in the wake of the "building," in the flow above its roof and in the shear layer spreading downstream from its top are recorded through profiles of mean velocity and turbulence intensity. The effect of the wind direction with respect to the model is also investigated.     

Forecasting Daily Maximum Surface Ozone Concentrations in Brunei Darussalam—An ARIMA Modeling Approach

Abstract

A time series approach using autoregressive integrated moving average (ARIMA) modeling has been used in this study to obtain maximum daily surface ozone (O₃) concentration forecasts. The order of the fitted ARIMA model is found to be (1,0,1) for the surface O₃ data collected at the airport in Brunei Darussalam during the period July 1998-March 1999. The model forecasts of one-day-ahead maximum O₃ concentrations have been found to be reasonably close to the observed concentrations. The model performance has been evaluated on the basis of certain commonly used statistical measures. The overall model performance is found to be quite satisfactory as indicated by the values of Fractional Bias, Normalized Mean Square Error, and Mean Absolute Percentage Error as 0.025, 0.02, and 13.14% respectively.     

Fate of 14C-ethyl prothiofos insecticide in canola seeds and oils

Canola plants were treated with ¹⁴C- prohiofos under conditions simulating local agricultural practices. ¹⁴C-residues in seeds were determined at different time intervals. At harvest time about 32 % of ¹⁴C-activity was associated with oil. The methanol soluble ¹⁴C-residues accounted for 12 % of the total seed residues after further seeds extraction, while the cake contained about 49 % of the total residues. About 69 % of the ¹⁴C-activity in the crude oil could be eliminated by simulated commercial processes locally used for oil refining. Chromatographic analysis of crude and refined oil revealed the presence of the parent compound together with three metabolites which were identified as prothiofos oxon, O-ethyl phosphorothioate and O-ethyl S-propyl phosphorothioate, besides one unknown compound. While methanol extract revealed the presence of despropylthio prothiofos and O-ethyl phosphoric acid as free metabolites acid hydrolysis of the conjugated metabolites in the methanol extract yielded 2, 4-dichlorophenole which was detected by color. When rats were fed the extracted cake for 72 hours, the bound residues were found to be bioavailable. The main excretion route was via the expired air (42 %), while the ¹⁴C-residues excreted in urine and feces were 30 % and 11 %, respectively. The radioactivity detected among various organs accounted to 7.5 %.Chromatographic analysis of urine indicated the presence of prothiofos oxon, O-ethyl phosphoric acid and 2, 4-dichlorophenole as main degradation products of prothiofos in free and conjugated form.     

Polychlorinated biphenyls hot and cold seasons distribution in see water,sediment, and fish samples in the Khour-e-Mousa (Mah-Shahr), Iran

The concentrations of polychlorinated biphenyls (PCBs) were assessed at four sites in Khour-e-Mousa (Mah-Shahr), Iran. Sea water, sediment and fish (cynoglossus bilineatus) samples were taken at each site and were analysed for PCB levels. To investigate the possible source of PCBs found in fish samples, sediments and waters were collected from four sites (D1, D2, D3, and D4) and studied. The relationship between PCB concentrations in sediment, water and fish is discussed. The results indicate that PCBs are detected in all fish samples and its concentration range from 3.2 to 102.7 μg kg^?1 dry weight and 5.4–149.7 μg kg^?1 dry weight in cold and warm seasons, respectively. The D2 and D4 sites were found to have the highest and lowest levels of PCB concentrations, respectively. Total congener PCB (CB, 28, 52, 44, 101, 149, 118, 153, 138, and 180) concentrations at the sediment samples for D1, D2, D3, and D4 sites ranged from 1.6 to 30.9 μg kg^?1 dry weight and 2.3–47.1 μg kg^?1 dry weight in cold and warm seasons, respectively. The total PCB concentrations for D2 site were found to be significantly higher than other three sites. Total water congener PCB (CB, 28, 52, 44, 101, 149, 118, 153, 138, and 180) concentrations ranged from 0.01 to 0.25 μg L^?1 and 0.02–0.39 μg L^?1 in cold and warm seasons, respectively.     

Uranium biosorption by <Emphasis Type="Italic">Padina</Emphasis> sp. algae biomass: kinetics and thermodynamics

Introduction  

Kinetic, thermodynamic, and equilibrium isotherms of the biosorption of uranium ions onto Padina sp., a brown algae biomass, in a batch system have been studied.     

Treatment of benzene and n-hexane mixtures in trickle-bed air biofilters

Trickle-bed air biofilters (TBABs) are suitable for treatment of hydrophilic volatile organic compounds, but they pose a challenge for hydrophobic compounds. Three laboratory-scale TBABs were used for the treatment of an airstream contaminated with different ratios of n-hexane and benzene mixtures. The ratios studied were 1:1, 2:1, and 1:3 n-hexane:benzene by volume. Each TBAB was operated at a pH of 4 and a temperature of 20 degrees C. The use of acidic-buffered nutrient solution was targeted for changing the microorganism consortium to fungi as the main biodegradation element. The experimental plan was designed to investigate the long-term performance of the TBABs with an emphasis on different mixture loading rates, removal efficiency with TBAB depth, volatile suspended solids, and carbon mass balance closure. n-Hexane loading rate was kept constant in the TBABs for comparison reasons and ranged from 4 to 22 g/(m3 x hr). Corresponding benzene loadings ranged from 4 to 43 g/(m3 x hr). Generally, benzene behavior in the TBAB was superior to that of n-hexane because of its higher solubility. n-Hexane showed improved performance in the 2:1 mixing ratio as compared with the other two ratios.     

Monitoring,mapping and health risk assessment of fluoride in drinking water supplies in rural areas of Maku and Poldasht,Iran

The aim of this study was to investigate and determine fluoride concentrations in drinking water supplies in rural areas of Maku and Poldasht in West Azerbaijan Province, the northwest of Iran. Fluorosis risk assessment and characterization was also investigated. Fluoride concentrations mapping was accomplished by using the GIS system. Totally, 356 water samples, including one sample in each season, were collected from 89 water supplies providing water for 95 and 61 rural areas of Maku and Poldasht, respectively. According to the results, in Maku and Poldasht, 25 and 30 rural areas had contaminated water sources, respectively. Average annual fluoride concentrations ranged from 3.04 to 7.31 mg/l in the contaminated villages of Maku, which is about 2–4.8 times higher than the maximum standard level of the Iranian drinking water standard, and 4.52–8.21 mg/l in the contaminated areas of Poldasht, which is about 3–5.47 times higher than the maximum standard level. The maximum fluoride level was determined 11.12 mg/l and 10.98 mg/l in one of villages of Maku and Poldasht Counties in summer, respectively. Neither in Maku nor in Poldasht, water resources showed dental cavity risk, while dental fluorosis risk and skeletal fluorosis risk were very significant in some villages of both cities. Children were at most risk of fluorosis. New alternative water supplies for the contaminated villages if possible, consumption of bottled water and application of reverse osmosis are recommended as remedial actions in the contaminated areas.