基于esp基因和JCV标记的MST方法在五大流域典型水源地中的应用

非点源污染目前已经成为影响水体环境的重要污染。微生物源示踪技术(microbial source tracking,MST)是解决非点源污染的一项新技术,它可以确定污染的宿主来源。肠球菌esp基因和多瘤病毒JCV可以作为检测水体中人源粪便污染的分子标记,其灵敏度和特异性都很高。为分析五大流域水源地是否受到人源粪便的污染,对辽河、海河、淮河、长江和黄河五大流域典型水源地水样进行采集和检测,选取人源粪便特异病原微生物肠球菌的esp基因和多瘤病毒JCV建立了相应的MST分子检测方法。结果表明,五大流域的典型水源地采样点均有可能受到了人源粪便的污染,可为当地相关部门提供技术支持和数据参考。     

四氯丙烯对稀有鮈鲫的急性毒性及安全浓度评价

采用半静态试验方式测试了四氯丙烯对稀有鮈鲫(Gobiocypris rarus)的急性毒性,试验浓度分别设定为0.25 mg·L~(-1)、0.30mg·L~(-1)、0.36 mg·L~(-1)、0.42 mg·L~(-1)、0.50 mg·L~(-1)和0.60 mg·L~(-1),同时进行空白对照(试验用水)和分散剂对照(体积分数为0.006%的吐温-80水溶液)试验。采用气相色谱法对试验溶液进行浓度分析,实测浓度分别为0.19 mg·L~(-1)、0.25 mg·L~(-1)、0.34 mg·L~(-1)、0.40 mg·L~(-1)、0.51 mg·L~(-1)和0.64 mg·L~(-1),试验结果以实测浓度表示和统计。结果表明:四氯丙烯致稀有鮈鲫无死亡发生(EC0)的最高浓度为0.25 mg·L~(-1),导致稀有鮈鲫100%死亡(EC100)的最低浓度为0.51 mg·L~(-1)。根据实测浓度,用SPSS(17.0)概率单位法求得四氯丙烯对稀有鮈鲫的半数致死浓度96 h-LC50为0.347 mg·L~(-1),95%置信区间为0.328 mg·L~(-1)~0.361 mg·L~(-1)。     

孑遗植物四合木(Tetraenamongolica)迁地保护中的光合作用日变化特征与生理生态适应性

为了进一步廓清迁地保护条件下孑遗植物四合木（Tetraena mongolica）的光合生理生态适应性,在分析了瞬时光合效率的基础上,应用LI-6400光合作用测定系统测定了迁地保护试验区的四合木以及原生境伴生种白刺（Nitraria tangutorum）的光合作用日变化,并测定了其生长量。结果表明：四合木实生苗的生长南北冠幅大小依次为乌海四合木核心区实生苗（26.48 cm×27.26 cm）>鄂尔多斯实生苗（21.27 cm×21.75 cm）>阿拉善实生苗（19.25 cm×18.27 cm）。在原生境地乌海四合木核心区种植的实生苗与阿拉善实生苗之间的生长量存在显著差异（P≤0.01）,与鄂尔多斯实生苗之间的生长量存在显著差异（P≤0.05）。迁地保护条件下四合木生实生苗植株叶片光合速率Pn日变化均呈“双峰”曲线。不同试验区四合木光合作用日变化（Pn）、蒸腾速率（Tr）、气孔导度（Gs）和胞间 CO2浓度（Ci）均表现出明显的分异。迁地保护四合木条件下原生境地栽培的四合木实生苗的光合速率>鄂尔多斯栽培的四合木实生苗的光合速率>阿拉善栽培的四合木实生苗。鉴此可以作进一步推论,孑遗濒危植物四合木从原生境地西鄂尔多斯核心区（乌海）东移进行迁地保护具有更高的生理生态适应性和生境适宜性。但完成“从种子到种子”进而实现“保存性和代表性”,最终实现四合木迁地保护的“保持性和防止性”,保持其遗传多样性和遗传稳定性,最终成功实现四合木的迁地保护仍有待作进一步探索和深入研究。     

表观遗传学机制与空气污染的健康效应

空气污染是一个全球性的问题,并且具有深远的环境影响。暴露于空气污染会对人体健康产生许多不同的影响,理解空气污染的健康效应又是一个复杂命题,既要考虑不同类型的污染物同时也要考虑相关疾病的复杂性。然而越来越多的研究表明,表观遗传学在空气污染相关疾病的发生、发展中发挥着重要的作用。空气污染物可引起DNA甲基化、组蛋白修饰和miRNA表达等表观遗传学改变,这种改变往往发生在疾病产生的早期,因此相关研究不仅可以了解疾病的发病机制,而且还为疾病早期诊断和预防筛选可能的标志物。本文综述了表观遗传学的几种修饰方式和空气污染物造成不良健康损伤机制的一些研究进展。     

Could wastewater analysis be a useful tool for China? — A review

Analysingwastewater samples is an innovative approach that overcomesmany limitations of traditional surveys to identify and measure a range of chemicals that were consumed by or exposed to people living in a sewer catchment area. First conceptualised in 2001, much progress has been made to make wastewater analysis (WWA) a reliable and robust tool for measuring chemical consumption and/or exposure. At the moment, the most popular application of WWA, sometimes referred as sewage epidemiology, is to monitor the consumption of illicit drugs in communities around the globe, including China. The approach has been largely adopted by lawenforcement agencies as a device tomonitor the temporal and geographical patterns of drug consumption. In the future, themethodology can be extended to other chemicals including biomarkers of population health (e.g. environmental or oxidative stress biomarkers, lifestyle indicators or medications that are taken by different demographic groups) and pollutants that people are exposed to (e.g. polycyclic aromatic hydrocarbons, perfluorinated chemicals, and toxic pesticides). The extension of WWA to a huge range of chemicals may give rise to a field called sewage chemical-information mining (SCIM) with unexplored potentials. China has many densely populated cities with thousands of sewage treatment plants which are favourable for applying WWA/SCIM in order to help relevant authorities gather information about illicit drug consumption and population health status. However, there are some prerequisites and uncertainties of the methodology that should be addressed for SCIM to reach its full potential in China.     

Applying a new method for direct collection, volume quantification and determination of N2 emission from water

The emission of N₂ is important to remove excess N from lakes, ponds, and wetlands. To investigate the gas emission from water, Gao et al. (2013) developed a new method using a bubble trap device to collect gas samples from waters. However, the determination accuracy of sampling volume and gas component concentration was still debatable. In this study, the method was optimized for in situ sampling, accurate volume measurement and direct injection to a gas chromatograph for the analysis of N₂ and other gases. By the optimized new method, the recovery rate for N₂ was 100.28% on average; the mean coefficient of determination (R²) was 0.9997; the limit of detection was 0.02%. We further assessed the effects of the new method, bottle full of water, vs. vacuum bag and vacuum vial methods, on variations of N₂ concentration as influenced by sample storage times of 1, 2, 3, 5, and 7 days at constant temperature of 15°C, using indices of averaged relative peak area (%) in comparison with the averaged relative peak area of each method at 0 day. The indices of the bottle full of water method were the lowest (99.5%-108.5%) compared to the indices of vacuum bag and vacuum vial methods (119%-217%). Meanwhile, the gas chromatograph determination of other gas components (O₂, CH₄, and N₂O) was also accurate. The new method was an alternative way to investigate N₂ released from various kinds of aquatic ecosystems.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake,Lake Taihu,China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

Rapid and simple spectrophotometric determination of persulfate in water by microwave assisted decolorization of Methylene Blue

A rapid and simple method for determination of persulfate in aqueous solution was developed. The method is based on the rapid reaction of persulfate with Methylene Blue(MB) via domestic microwave activation, which can promote the activation of persulfate and decolorize MB quickly. The depletion of MB at 644 nm(the maximum absorption wavelength of MB) is in proportion to the increasing concentration of persulfate in aqueous solution. Linear calibration curve was obtained in the range 0–1.5 mmol/L, with a limit of detection of 0.0028 mmol/L. The reaction time is rapid(within 60 sec), which is much shorter than that used for conventional methods. Compared with existing analytical methods, it need not any additives, especially colorful Fe2+, and need not any pretreatment for samples, such as p H adjustment.     

Structure and function of rhizosphere and non-rhizosphere soil microbial community respond differently to elevated ozone in field-planted wheat

To assess the responses of the soil microbial community to chronic ozone (O₃), wheat seedlings (Triticum aestivum Linn.) were planted in the field and exposed to elevated O₃ (eO₃) concentration. Three treatments were employed: (1) Control treatment (CK), AOT40 = 0; (2) O₃-1, AOT40 = 1.59 ppm•h; (3) O₃-2, AOT40 = 9.17 ppm•h. Soil samples were collected for the assessment of microbial biomass C, community-level physiological profiles (CLPPs), and phospholipid fatty acids (PLFAs). EO₃ concentration significantly reduced soil microbial carbon and changed microbial CLPPs in rhizosphere soil, but not in non-rhizosphere soil. The results of the PLFAs showed that eO₃ concentrations had significant effects on soil community structure in both rhizosphere and non-rhizosphere soils. The relative abundances of fungal and actinomycetous indicator PLFAs decreased in both rhizosphere and non-rhizosphere soils, while those of bacterial PLFAs increased. Thus the results proved that eO₃ concentration significantly changed the soil microbial community function and composition, which would influence the soil nutrient supply and carbon dynamics under O₃ exposure.