Comparison of field-observed and model-predicted plume trends at fuel-contaminated sites: implications for natural attenuation rates

Subsequent to modeling of natural attenuation processes to predict contaminant trends and plume dynamics, monitoring data were used to evaluate the effectiveness of natural attenuation at reducing contaminant concentrations in groundwater at seven fuel-contaminated sites. Predicted and observed contaminant trends at seven sites were compared in order to empirically assess the accuracy of some fundamental model input parameters and assumptions. Most of the models developed for the study sites tended to overestimate plume migration distance, source persistence, and/or the time required for the benzene, toluene, ethyl benzene, and xylenes (BTEX) plumes to attenuate. Discrepancies between observed and predicted contaminant trends and plume behavior suggested that the influence of natural attenuation process may not have been accurately simulated. The conservatism of model simulations may be attributed to underestimation of natural source weathering rates, overestimation of the mass of contaminant present in the source area, and/or use of overly conservative first-order solute decay rates.     

Societal implications of a changing Arctic Ocean

The Arctic Ocean is undergoing rapid change: sea ice is being lost, waters are warming, coastlines are eroding, species are moving into new areas, and more. This paper explores the many ways that a changing Arctic Ocean affects societies in the Arctic and around the world. In the Arctic, Indigenous Peoples are again seeing their food security threatened and cultural continuity in danger of disruption. Resource development is increasing as is interest in tourism and possibilities for trans-Arctic maritime trade, creating new opportunities and also new stresses. Beyond the Arctic, changes in sea ice affect mid-latitude weather, and Arctic economic opportunities may re-shape commodities and transportation markets. Rising interest in the Arctic is also raising geopolitical tensions about the region. What happens next depends in large part on the choices made within and beyond the Arctic concerning global climate change and industrial policies and Arctic ecosystems and cultures.     

Links among nitrification, nitrifier communities, and edaphic properties in contrasting soils receiving dairy slurry

Soil biotic and abiotic factors strongly influence nitrogen (N) availability and increases in nitrification rates associated with the application of manure. In this study, we examine the effects of edaphic properties and a dairy (Bos taurus) slurry amendment on N availability, nitrification rates and nitrifier communities. Soils of variable texture and clay mineralogy were collected from six USDA-ARS research sites and incubated for 28 d with and without dairy slurry applied at a rate of ~300 kg N ha(-1). Periodically, subsamples were removed for analyses of 2 M KCl extractable N and nitrification potential, as well as gene copy numbers of ammonia-oxidizing bacteria (AOB) and archaea (AOA). Spearman coefficients for nitrification potentials and AOB copy number were positively correlated with total soil C, total soil N, cation exchange capacity, and clay mineralogy in treatments with and without slurry application. Our data show that the quantity and type of clay minerals present in a soil affect nitrifier populations, nitrification rates, and the release of inorganic N. Nitrogen mineralization, nitrification potentials, and edaphic properties were positively correlated with AOB gene copy numbers. On average, AOA gene copy numbers were an order of magnitude lower than those of AOB across the six soils and did not increase with slurry application. Our research suggests that the two nitrifier communities overlap but have different optimum environmental conditions for growth and activity that are partly determined by the interaction of manure-derived ammonium with soil properties.     

Xeno-estrogenic compounds in precipitation

The exposure to some chemicals can lead to hormone disrupting effects. Presently, much attention is focused on so-called xeno-estrogens, synthetic compounds that interact with hormone receptors causing a number of reactions that eventually lead to effects related to reproduction and development. The current study was initiated to investigate the presence of a number of such compounds in precipitation as a follow-up on a previous study in which pesticide concentrations in air and precipitation were determined. Rainwater samples were collected at about 50 locations in The Netherlands in a four week period. The samples were analysed for bisphenol-A, alkylphenols and alkylphenol ethoxylates, phthalates, flame retardants and synthetic musk compounds. The results clearly indicated the presence of these compounds in precipitation. The concentrations ranged from the low ng l(-1) range for flame retardants to several thousands of ng l(-1) for the phthalates. Bisphenol-A was found in 30% of the samples in concentrations up to 130 ng l(-1), while alkylphenols and alkylphenol ethoxylates were found in virtually all locations in concentrations up to 920 ng l(-1) for the individual compounds. Phthalates were by far the most abundant xeno-estrogens in the precipitation samples and were found in every sample. Di-isodecyl phthalate was found in a surprisingly high concentration of almost 100 000 ng l(-1). Polybrominated flame retardants were found in the low ng l(-1) range and generally in less than 20% of the samples. Noticeable was the finding of hexabromocyclododecane, a replacement for the polybrominted diphenyl ethers at one location in a concentration of almost 2000 ng l(-1). Finally, as expected, synthetic musk compounds were detected in almost all samples. This is especially true for the polycyclic musks HHCB and AHTN. Nitro musks were found, but only on a few locations. Kriging techniques were used to calculate precipitation concentrations in between actual sampling locations to produce contour plots for a number of compounds. These plots clearly show located emission sources for a number of compounds such as bisphenol-A, nonylphenol ethoxylate, phthalates and AHTN. On the contrary, the results for HHCB and some phthalates indicated diffuse emission patterns, probably as the result of the use of consumer products containing these compounds.     

Statistical Analysis of Trends in Urban Ozone Air Quality

The purpose of this paper is to demonstrate the use of some statistical methods for examining trends in ambient ozone air quality downwind of major urban areas. To this end, daily maximum 1 -hr ozone concentrations measured over New Jersey, metropolitan New York City and Connecticut for the period 1980 to 1989 were assembled and analyzed. This paper discusses the application of the bootstrap method, extreme value statistics and a nonparametric test for evaluating trends in urban ozone air quality. The results indicate that although there is an improvement in ozone air quality downwind of New York City, there has been little change in ozone levels upwind of New York City during this ten-year period.     

Evaluation of a Probabilistic Exposure Model Applied to Carbon Monoxide (pNEM/CO) Using Denver Personal Exposure Monitoring Data

The probabilistic National Ambient Air Quality Standards (NAAQS) Exposure Model applied to carbon monoxide (pNEM/CO) was developed by the U.S. Environmental Protection Agency (EPA) to estimate frequency distributions of population exposure to carbon monoxide (CO) and the resulting carboxyhemoglobin (COHb) levels. To evaluate pNEM/CO, the model was set up to simulate CO exposure data collected during a Denver Personal Exposure Monitoring Study (PEM) conducted during the winter of 1982-1983. This paper compares computer-simulated exposure distributions obtained by pNEM/CO with the observed cumulative relative frequency distributions of population exposure to CO from 779 people in the Denver PEM study.

The subjects were disaggregated into two categories depending upon whether they lived in a home with a gas stove or an electric stove. The observed and predicted population exposure frequency distributions were compared in terms of 1-hr daily maximum exposure (1DME) and 8-hr daily maximum moving average exposure (8DME) for people living in homes with gas stove or an electric stove. For 1DME, the

computer-simulated results from pNEM/CO agreed most closely within the range of 6-13 ppm, but overestimated occurrences at low exposure (<6 ppm) and underestimated occurrences at high exposure (>13 ppm). For 8DME, the predicted exposures agreed best with observed exposures in the range of CO concentration between 5.5 and 7 ppm, and over-predicted occurrences below 5.5 ppm and under-predicted occurrences above 7 ppm.     

Evaluation of a Probabilistic Exposure Model Applied

The probabilistic National Ambient Air Quality Standards (NAAQS) Exposure Model applied to carbon monoxide (pNEM/CO) was developed by the U.S. Environmental Protection Agency (EPA) to estimate frequency distributions of population exposure to carbon monoxide (CO) and the resulting carboxyhemoglobin (COHb) levels. To evaluate pNEM/CO, the model was set up to simulate CO exposure data collected during a Denver Personal Exposure Monitoring Study (PEM) conducted during the winter of 1982-1983.

This paper compares computer-simulated exposure distributions obtained by pNEM/CO with the observed cumulative

relative frequency distributions of population exposure to CO from 779 people in the Denver PEM study. The subjects were disaggregated into two categories depending upon whether they lived in a home with a gas stove or an electric stove. The observed and predicted population exposure frequency distributions were compared in terms of 1-hr daily maximum exposure (1DME) and 8-hr daily maximum moving average exposure (8DME) for people living in homes with gas stove or an electric stove. For 1DME, the computer-simulated results from pNEM/CO agreed most closely within the range of 6-13 ppm, but overestimated occurrences at low exposure (<6 ppm) and underestimated occurrences at high exposure (>13 ppm). For 8DME, the predicted exposures agreed best with observed exposures in the range of CO concentration between 5.5 and 7 ppm, and over-predicted occurrences below 5.5 ppm and under-predicted occurrences above 7 ppm.     

Comparative study of biochemical and immunological biomarkers in three marine bivalves exposed at a polluted site

A battery of biochemical and immunological biomarkers used for pollution assessment were measured for first time in the clams Venus verrucosa and Callista chione and were compared with those of the mussel Mytilus galloprovincialis, a well-established indicator organism utilized in numerous environmental monitoring programs. Clams and mussel were transplanted at a polluted and a reference site or maintained at the laboratory. Among biochemical biomarkers, acetylcholinesterase did not differ at the polluted site in all species, but there was a significant difference between the mussel and the clams, glutathione S-transferase showed a clear inhibition at the polluted site in all species and a significant difference between the two clams was also indicated, while catalase activities were increased only in V. verrucosa at the polluted site and not in mussel or the other clam. Immunological biomarkers responses were also pronounced at the polluted site. Lysozyme activity was species-dependent whereas respiratory burst activity measured as luminol-dependent chemiluminescence (CL) was site and stimulus dependent, and it was evident in M. galloprovincialis and V. verrucosa and not in C. chione. Further investigation focused on biochemical and immunological biomarkers related with the oxidative mechanisms in clams will strengthen and expand their use as bioindicators for pollution assessment.     

Diagnosis of dissolved organic matter removal by GAC treatment in biologically treated papermill effluents using advanced organic characterisation techniques

Granular activated carbon (GAC) exhaustion rates on pulp and paper effluent from South East Australia were found to be a factor of three higher (3.62 cf. 1.47 kg m⁻³) on Kraft mills compared to mills using Thermomechanical pulping supplemented by Recycled Fibre (TMP/RCF). Biological waste treatment at both mills resulted in a final effluent COD of 240 mg L⁻¹. The dissolved organic carbon (DOC) was only 1.2 times higher in the Kraft effluent (70 vs. 58 mg L⁻¹), however, GAC treatment of Kraft and TMP/RCF effluent was largely different on the DOC persisted after biological treatment. The molecular mass (636 vs. 534 g mol⁻¹) and aromaticity (5.35 vs. 4.67 L mg⁻¹ m⁻¹) of humic substances (HS) were slightly higher in the Kraft effluent. The HS aromaticity was decreased by a factor of 1.0 L mg⁻¹ m⁻¹ in both Kraft and TMP/RCF effluent. The molecular mass of the Kraft effluent increased by 50 g mol⁻¹ while the molecular mass of the TMP/RCF effluent was essentially unchanged after GAC treatment; the DOC removal efficiency of the GAC on Kraft effluent was biased towards the low molecular weight humic compounds. The rapid adsorption of this fraction, coupled with the slightly higher aromaticity of the humic components resulted in early breakthrough on the Kraft effluent. Fluorescence excitation-emission matrix analysis of the each GAC treated effluent indicated that the refractory components were higher molecular weight humics on the Kraft effluent and protein-like compounds on the TMP/RCF effluent. Although the GAC exhaustion rates are too high for an effective DOC removal option for biologically treated pulp and paper mill effluents, the study indicates that advanced organic characterisation techniques can be used to diagnose GAC performance on complex effluents with comparable bulk DOC and COD loads.     

BETR global--a geographically-explicit global-scale multimedia contaminant fate model

We present two new software implementations of the BETR Global multimedia contaminant fate model. The model uses steady-state or non-steady-state mass-balance calculations to describe the fate and transport of persistent organic pollutants using a desktop computer. The global environment is described using a database of long-term average monthly conditions on a 15° × 15° grid. We demonstrate BETR Global by modeling the global sources, transport, and removal of decamethylcyclopentasiloxane (D5).