Dielectrophoretic separation of Bacillus subtilis spores from environmental diesel particles

Isolation of pathogenic bacteria from non-biological material of similar size is a vital sample preparation step in the identification of such organisms, particularly in the context of detecting bio-terrorist attacks. However, many detection methods are impeded by particulate contamination from the environment such as those from engine exhausts. In this paper we use dielectrophoresis--the induced motion of particles in non-uniform fields--to successfully remove over 99% of diesel particulates acquired from environmental samples, whilst letting bacterial spores of B. subtilis pass through the chamber largely unimpeded. We believe that such a device has tremendous potential as a precursor to a range of detection methods, improving the signal-to-noise ratio and ultimately improving detection rates.     

Development of a simple, accurate SPME-based method for assay of VOCs in column breakthrough experiments

Solid-phase microextraction (SPME) with gas chromatography is to be used for assay of effluent liquid samples from soil column experiments associated with VOC fate/transport studies. One goal of the fate/transport studies is to develop accurate, highly reproducible column breakthrough curves for 1,2-cis-dichloroethylene (cis-DCE) and trichloroethylene (TCE) to better understand interactions with selected natural solid phases. For SPME, the influences of the sample equilibration time, extraction temperature and the ratio of volume of sample bottle to that of the liquid sample (V(T)/V(w)) are the critical factors that could influence accuracy and precision of the measured results. Equilibrium between the gas phase and liquid phase was attained after 200 min of equilibration time. The temperature must be carefully controlled due to variation of both the Henry's constant (K(h)) and the fibre/gas phase distribution coefficient (K(fg)). K(h) decreases with decreasing temperature while K(fg) increases. Low V(T)/V(w) yields better sensitivity but results in analyte losses and negative bias of the resultant assay. High V(T)/V(w) ratio yields reduced sensitivity but analyte losses were found to be minimal, leading to better accuracy and reproducibility. A fast SPME method was achieved, 5 min for SPME extraction and 3.10 min for GC analysis. A linear calibration function in the gas phase was developed to analyse the breakthrough curve data, linear between a range of 0.9-236 microgl(-1), and a detection limit lower than 5 microgl(-1).     

Simultaneous optimization of dense non-aqueous phase liquid (DNAPL) source and contaminant plume remediation

A framework is developed for simultaneous, optimal design of groundwater contaminant source removal and plume remediation strategies. The framework allows for varying degrees of effort and cost to be dedicated to source removal versus plume remediation. We have accounted for the presence of physical heterogeneity in the DNAPL source, since source heterogeneity controls mass release into the plume and the efficiency of source removal efforts. We considered high and low estimates of capital and operating costs for chemical flushing removal of the source, since these are expected to vary form site to site. Using the lower chemical flushing cost estimates, it is found that the optimal allocation of funds to source removal or plume remediation is sensitive to the degree of heterogeneity in the source. When the time elapsed between the source release and the implementation of remediation was varied, it was found that, except for the longest elapsed time (50,000 days), a combination of partial source removal and plume remediation was most efficient. When first-order, dissolved contaminant degradation was allowed, source removal was found to be unnecessary for the cases where the degradation rate exceeded intermediate values of the first-order rate constant. Finally, it was found that source removal became more necessary as the degree of aquifer heterogeneity increased.     

Modelling the closure-related geochemical evolution of groundwater at a former uranium mine

A newly developed reactive transport model was used to evaluate the potential effects of mine closure on the geochemical evolution in the aquifer downgradient from a mine site. The simulations were conducted for the K?nigstein uranium mine located in Saxony, Germany. During decades of operation, uranium at the former mine site had been extracted by in situ acid leaching of the ore underground, while the mine was maintained in a dewatered condition. One option for decommissioning is to allow the groundwater level to rise to its natural level, flooding the mine workings. As a result, pore water containing high concentrations of dissolved metals, radionuclides, and sulfate may be released. Additional contamination may arise due to the dissolution of minerals contained in the aquifer downgradient of the mine. On the other hand, dissolved metals may be attenuated by reactions within the aquifer. The geochemical processes and interactions involved are highly non-linear and their impact on the quality of the groundwater and surface water downstream of the mine is not always intuitive. The multicomponent reactive transport model MIN3P, which can describe mineral dissolution-precipitation reactions, aqueous complexation, and oxidation-reduction reactions, is shown to be a powerful tool for investigating these processes. The predictive capabilities of the model are, however, limited by the availability of key geochemical parameters such as the presence and quantities of primary and secondary mineral phases. Under these conditions, the model can provide valuable insight by means of sensitivity analyses.     

Sea lamprey orient toward a source of a synthesized pheromone using odor-conditioned rheotaxis

Characterization of vertebrate chemo-orientation strategies over long distances is difficult because it is often not feasible to conduct highly controlled hypothesis-based experiments in natural environments. To overcome the challenge, we couple in-stream behavioral observations of female sea lampreys (Petromyzon marinus) orienting to plumes of a synthesized mating pheromone, 7α,12α,24-trihydroxy-5α-cholan-3-one-24-sulfate (3kPZS), and engineering algorithms to systematically test chemo-orientation hypotheses. In-stream field observations and simulated movements of female sea lampreys according to control algorithms support that odor-conditioned rheotaxis is a component of the mechanism used to track plumes of 3kPZS over hundreds of meters in flowing water. Simulated movements of female sea lampreys do not support that rheotaxis or klinotaxis alone is sufficient to enable the movement patterns displayed by females in locating 3kPZS sources in the experimental stream. Odor-conditioned rheotaxis may not only be effective at small spatial scales as previous described in crustaceans, but may also be effectively used by fishes over hundreds of meters. These results may prove useful for developing management strategies for the control of invasive species that exploit the odor-conditioned tracking behavior and for developing biologically inspired navigation strategies for robotic fish.     

Lead in New York City community garden chicken eggs: influential factors and health implications

Raising chickens for eggs in urban areas is becoming increasingly common. Urban chickens may be exposed to lead, a common urban soil contaminant. We measured lead concentrations in chicken eggs from New York City (NYC) community gardens and collected information on factors that might affect those concentrations. Lead was detected between 10 and 167 μg/kg in 48 % of NYC eggs. Measures of lead in eggs from a henhouse were significantly associated (p < 0.005) with lead concentrations in soil. The association between soil and egg lead has been evaluated only once before, by a study of a rural region in Belgium. In our study, the apparent lead soil-to-egg transfer efficiency was considerably lower than that found in Belgium, suggesting that there may be important geographic differences in this transfer. We developed models that suggested that, for sites like ours, lead concentrations in >50 % of eggs from a henhouse would exceed store-bought egg concentrations (<7–13 μg/kg; 3 % above detection limit) at soil lead concentrations >120 mg/kg and that the concentration in one of six eggs from a henhouse would exceed a 100 μg/kg guidance value at soil lead concentrations >410 mg/kg. Our models also suggested that the availability of dietary calcium supplements was another influential factor that reduced egg lead concentrations. Estimates of health risk from consuming eggs with the lead concentrations we measured generally were not significant. However, soil lead concentrations in this study were <600 mg/kg, and considerably higher concentrations are not uncommon. Efforts to reduce lead transfer to chicken eggs and associated exposure are recommended for urban chicken keepers.     

Investigating the potential for different scooter and car exhaust emissions to cause cytotoxic and (pro-)inflammatory responses to a 3D in vitro model of the human epithelial airway

The aim of this study was to compare the cytotoxicity and the (pro-)inflammatory responses of two-stroke (direct injection and carburetor technology) and four-stroke scooter and diesel car exhaust emissions on lung cells in vitro. This was analyzed by exposing a 3D in vitro model of the epithelial airway (consisting of human bronchial epithelial cells (cell line 16HBE14o^?) combined with human whole blood monocyte-derived macrophages and dendritic cells) to physically characterized exhaust emissions. Biological endpoints of cytotoxicity (lactate dehydrogenase release), as well as pro-inflammatory cytokine (tumor necrosis factor (TNF)-α) and inflammatory chemokine (interleukin(IL)-8) stimulation were examined. Two-stroke direct injection scooter exhaust contained the highest particle number concentration and nitrogen oxides (NO _x ) concentrations and the emissions from the two-stroke carburetor scooter contained the highest hydrocarbon and lowest NO _x concentrations. The four-stroke scooter emitted the highest carbon monoxide concentration whereas the cars emitted the lowest. The combination of various technical optimizations for the two-stroke direct injection scooter (particle filter, oxidative catalyst, better oil and fuel) reduced the total emissions strongly and the TNF-α concentration significantly (p?相似文献   

Contribution to the understanding of biologic concentrations of arsenic in children living in an urban area from Rio de Janeiro,Brazil

Environmental Science and Pollution Research - There are few studies about children’s environmental exposure to arsenic (As) in Brazil, most of them being in mining regions. The objective of...     

Measuring regional trends in ozone

We model maximum daily ozone concentration at a number of sites in Ontario in terms of weather classes, temperature, season and a moving average error term. In an effort to detect a regional trend in the remaining residuals, we develop a method related to principal components which obtains the linear combination of sites with greatest autocorrelation. We apply this method to data from sites in Southern Ontario and conclude that there was a regional trend in ozone during the period 1980–1992. A similar treatment does not find a general trend in temperature data but does reveal a widening gap in temperature between northern and southern sites.