Recycling, landfill consumption, and CO2 emission: analysis by waste input–output model

The emission of waste in an economy, including landfill, is to a large extent determined by its patterns of technology, institutions, and lifestyle. A mathematical model (the waste input–output model) is presented that gives a simple analytical representation of this interdependence. The model was used to evaluate the effects of alternative waste disposal and recycling options on the levels of industrial production, landfill consumption, and the emission of carbon dioxide, and also to analyze the overall dependence on landfill of individual industries. It was found that a systematic combination of the options could be effective in reducing the overall landfill consumption and carbon dioxide emission. Received: November 4, 2000 / Accepted: August 2, 2001     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

Evaluation of the impact of matrix effects in LC/MS measurement on the accurate quantification of neonicotinoid pesticides in food by isotope-dilution mass spectrometry

The use of isotope-labeled internal standards is the most widely accepted approach to overcome the matrix effects on quantification of pesticides in food by LC/MS. We evaluated the impact of the matrix effects on quantification of six neonicotinoid pesticides, acetamiprid, clothianidin, dinotefuran, imidacloprid, thiacloprid, and thiamethoxam, in food by using deuterated internal standards. The calibration curves for each pesticide were obtained by using matrix-free and matrix-matched calibration solutions with blank brown rice, carrot, and green onion extracts. For brown rice and carrot, the matrix effects were not observed. In contrast, the slopes of calibration curves for each pesticide were influenced by presence of green onion extracts in calibration solutions (variability of the slopes was 4–9%), because the ratios of peak area for native pesticide to those for internal standards were influenced by matrix. The spike-and-recovery test with green onion was also performed. The analytical values obtained by using matrix-free calibration solution were biased from the spiked concentration, whereas those obtained by using matrix-matched calibration solution were comparable to the spiked concentration. These results indicate that matrix-matched calibration solution should be used for accurate quantification of neonicotinoid pesticides in food by LC/MS using deuterated internal standards.     

Life cycle of meats: an opportunity to abate the greenhouse gas emission from meat industry in Japan

The food industry is one of the world's largest industrial sectors, hence a large contributor of greenhouse gases (GHG) which cause global warming. This study evaluates the life cycle of various types of meat to determine if the GHG emission from the meat industry in Japan could be reduced if the population makes different dietary choices. It was confirmed that the GHG emission of beef was greater than that of pork or chicken. The GHG emission from meat in general also depends on the per capita caloric intake (if meat supplies the recommended animal protein or contributes to it at the present rate). In a healthy and balanced diet (9.2 MJ i.e., 2200 kcal in total, where either mixed meat or chicken or pork or beef contributes 2.2%), the GHG emission is estimated to be 0.28 or 0.17 or 0.15 or 0.77 kg CO? eq/person/day, respectively. A change in consumption patterns (from beef to chicken or pork) and the adoption of a healthy and balanced diet would help to abate about 2.5-54.0 million tons (CO? eq) produced by the meat industry each year in Japan.     

Bioethanol production from enzymatically saccharified lawn clippings from a golf course

The utilization of bioethanol is being focused on as a fuel alternative to oil and or natural gas. Bioethanol production from cellulosic plant residues is one of the solutions proposed for the problems caused by usage of food crops that are also vital for human consumption, such as sugar cane and corn, as a source of bioethanol. However, to utilize these new sources for bioethanol production, conditions for saccharification in each different material have not been optimized. In this study, we reported some optimum conditions for the saccharification of Korean lawn grass (KL) and bent grass (BG) using acremonium cellulase and endoglucanase as saccharifying enzymes for ethanol fermentation. With respect to saccharification of KL and BG, 0.19 and 0.18 g of d-glucose per g-substrate at maximum were produced, respectively. Comminution with a ball mill was found to be effective in the saccharification of KL, while ball-milled BG showed no significant improvement in saccharification. Being incorporated with 99 % of d-glucose consumption, saccharified KL was incubated for 3 days with Saccharomyces cerevisiae and Zymomonas mobilis, respectively, and each mixture fermented to ethanol yielding approximately 100 % of theoretical values from d-glucose consumption, respectively.     

Determination of PCDD/Fs and dioxin-like PCBs in fish oils for feed ingredients by congener-specific chemical analysis and CALUX bioassay

The present research was intended to determine the suitability of the CALUX assay as a screening method for dioxins in fish oil used as a feed ingredient in Japan. Alteration of TEQ in fish oil according to newly proposed toxic equivalency factors (TEF) is also discussed. In the analysis, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in 41 fish oil samples were determined by using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS) and CALUX bioassay. The mean TEQ values derived from 1998 WHO-TEF of PCDD/Fs and DL-PCBs were 2.6 and 9.9 pg g(-1) (ww), respectively. The levels of TEQ derived from the recently re-evaluated 2005 WHO-TEF were slightly lower than those of the former in both groups. Notably, the contribution of mono-ortho DL-PCBs to total 2005 WHO-TEQ was considerably decreased compared to the case of 1998 WHO-TEQ, resulting from the reduction in its TEF values, while the non-ortho DL-PCBs contribution was increased. The mean TEQ determined by CALUX assay for PCDD/Fs was approximately three times higher, whereas DL-PCBs was approximately two times lower than WHO-TEQ determined by HRGC/HRMS; the sum of PCDD/Fs and DL-PCBs was very similar by both methods. The correlation coefficients of TEQ between the CALUX assay and HRGC/HRMS analysis were 0.84, 0.89, and 0.90 for PCDD/Fs, DL-PCBs, and the sum, respectively. These results suggest that the CALUX assay is a very useful method for the screening of dioxin-related compounds in fish oils.     

Different uses of plant semiochemicals in host location strategies of the two tachinid parasitoids

Some members of the family Tachinidae (Insecta: Diptera) deposit numerous very small eggs, termed “microtype” eggs, on the food plants of their caterpillar hosts. Parasitization is successful only when the hosts ingest these eggs. To increase the chance of hosts encountering the eggs, microtype tachinid parasitoids have to choose a suitable plant that harbors hosts and lay their eggs near the hosts. In their host location process, semiochemicals emitted by host-infested plants offer the tachinids a reliable cue. We investigated the behavioral responses of two microtype tachinid parasitoids, Pales pavida and Zenillia dolosa, to maize plants infested with their caterpillar host, Mythimna separata, in a wind tunnel. P. pavida females showed a significantly higher rate of landing on caterpillar-infested plants than on mechanically wounded or intact plants, whereas Z. dolosa landed on both the caterpillar-infested and mechanically wounded plants at significantly higher rates than on intact plants. We also examined which part of a caterpillar-infested maize leaf induces oviposition. P. pavida deposited eggs on the margin of the leaf, whereas Z. dolosa preferentially laid eggs around a caterpillar-infested area or a mechanically wounded spot. P. pavida eggs retained their parasitization ability for more than 15?days after they were deposited, whereas the eggs of Z. dolosa could not survive more than 5?days after oviposition. Our results suggest that each tachinid parasitoid employs a different host location strategy to exploit semiochemicals coming from plant–herbivore interaction as cues in order to increase their parasitization success.     

Prediction of potential areas of species distributions based on presence-only data

We introduce a methodology to infer zones of high potential for the habitat of a species, useful for management of biodiversity, conservation, biogeography, ecology, or sustainable use. Inference is based on a set of sites where the presence of the species has been reported. Each site is associated with covariate values, measured on discrete scales. We compute the predictive probability that the species is present at each node of a regular grid. Possible spatial bias for sites of presence is accounted for. Since the resulting posterior distribution does not have a closed form, a Markov chain Monte Carlo (MCMC) algorithm is implemented. However, we also describe an approximation to the posterior distribution, which avoids MCMC. Relevant features of the approach are that specific notions of data acquisition such as sampling intensity and detectability are accounted for, and that available a priori information regarding areas of distribution of the species is incorporated in a clear-cut way. These concepts, arising in the presence-only context, are not addressed in alternative methods. We also consider an uncertainty map, which measures the variability for the predictive probability at each node on the grid. A simulation study is carried out to test and compare our approach with other standard methods. Two case studies are also presented.     

A case study of radon-222 transport from continental North-East Asia to the Japanese islands in winter by numerical analysis

A case study of the regional transport ( approximately 3000 km) of radon-222 ((222)Rn) from continental North-East Asia to the Japanese islands was performed by numerical analysis using five separate source areas (South, Middle and North China, Russia and Korea), while a seasonal northwest wind blew over the Japan Sea. The results for three periods (Term I: 16-18, Term II: 22-25 and Term III: 27-28 in December 1990) were compared with concentrations measured at the Kanazawa site (near the coast of the Japan Sea facing the seasonal wind) and the Nagoya site (overland and downwind on the shores of the Pacific Ocean). Most of the (222)Rn at the Kanazawa site was calculated to come from North China and Korea in Term I, Middle China, North China, and Korea in Term II, and Russia and Korea in Term III. The considerable differences in the origins of (222)Rn emanated from the continent were estimated between Terms I, II and III, even though the similar northwest wind was dominant over the Japan Sea. A contour line analysis indicated movement of (222)Rn emanated from Middle China in a northerly direction first and then a southeasterly direction, resulting from low pressure. The results suggest that the low-pressure systems play an important role in the transport of (222)Rn in North-East Asia.