Estimating Evapotranspiration and Seepage for a Sinkhole Wetland From Diurnal Surface‐Water Cycles1

Abstract: This study used measured diurnal surface‐water cycles to estimate daily evapotranspiration (ET) and seepage for a seasonally flooded sinkhole wetland. Diurnal surface‐water cycles were classified into five categories based on the relationship between the surface‐water body and the surrounding ground‐water system (i.e., recharge/discharge). Only one class of diurnal cycles was found to be suitable for application of this method. This subset of diurnal cycles was used to estimate ET and seepage and the relative importance of each transfer process to the overall water budget. The method has limited utility for wetlands with erratic hydrologic regimes (e.g., wetlands in urban environments). This is due to violation of the critical assumption that the inflow/outflow rate remains constant throughout the day. For application to surface‐water systems, the method is typically applied with an assumed specific yield of 1.0. This assumption was found to be invalid for application to surface‐water systems with a noncylindrical pond geometry. An overestimation of ET by as much as 60% was found to occur under conditions of low pond stage and high water loss. The results demonstrate the high ET rates that can occur in isolated wetlands due to contrasting roughness and moisture conditions (oasis and clothesline effects). Estimated ET rates ranged from 4.1 to 18.7 mm/day during the growing season. Despite these large ET rates, seepage (recharge) was found to be the dominant water loss mechanism for the wetland.     

加勒比海海洋保护区的娱乐性水下呼吸器潜水活动:使用者支付费用吗?

引言 建立海洋保护区的好处[1]是众所周知的,特别是对于珊瑚礁来说.通过理论上完全禁止在选定海域内进行任何形式的捕鱼活动,由此对捕鱼压力的降低一般可以保持以往目标鱼类[2～4]种群的数量和多样性,导致原来从渔场中消失的物种重新出现[5],而且大大提高大型掠食性鱼类的数量[6].     

Effects of temperature on feeding and activity in the crab Scylla serrata

The effect of temperature on feeding, duration of emergence and movement by the crab Scylla serrata (Forskal) was measured under laboratory conditions using infrared time-lapse photography. Little difference was found between experiments carried out at 25° and 20°C. All parameters measured declined at 16°C. At 12°C emergence time and movement were 24 and 33% respectively of the level at 25°C. At 25°C, 65% of crabs fed, but none did so at 12°C. No statistically significant difference was found between male and female crabs in the parameters measured.     

Geographic variability of Escherichia coli ribotypes from animals in Idaho and Georgia

Several genotypic methods have been developed for determining the host origin of fecal bacteria in contaminated waters. Some of these methods rely on a host origin database to identify environmental isolates. It is not well understood to what degree these host origin isolates are geographically variable (i.e., cosmopolitan or endemic). This is important because a geographically limited host origin database may or may not be universally applicable. The objective of our study was to use one genotypic method, ribotyping, to determine the geographic variability of the fecal bacterium, Escherichia coli, from one location in Idaho and three locations in Georgia for cattle (Bos taurus), horse (Equus caballus), swine (Sus scrofa), and chicken (Gallus gallus domesticus). A total of 568 fecal E. coli isolates from Kimberly, ID (125 isolates), Athens, GA (210 isolates), Brunswick, GA (102 isolates), and Tifton, GA (131 isolates), yielded 213 ribotypes. The percentage of ribotype sharing within an animal species increased with decreased distance between geographic locations for cattle and horses, but not for swine and chicken. When the E. coli ribotypes among the four host species were compared at one location, the percent of unshared ribotypes was 86, 89, 81, and 79% for Kimberly, Athens, Brunswick, and Tifton, respectively. These data suggest that there is good ribotype separation among host animal species at each location. The ability to match environmental isolates to a host origin database may depend on a large number of environmental and host origin isolates that ideally are not geographically separated.     

Generation of copper rich metallic phases from waste printed circuit boards

The rapid consumption and obsolescence of electronics have resulted in e-waste being one of the fastest growing waste streams worldwide. Printed circuit boards (PCBs) are among the most complex e-waste, containing significant quantities of hazardous and toxic materials leading to high levels of pollution if landfilled or processed inappropriately. However, PCBs are also an important resource of metals including copper, tin, lead and precious metals; their recycling is appealing especially as the concentration of these metals in PCBs is considerably higher than in their ores. This article is focused on a novel approach to recover copper rich phases from waste PCBs. Crushed PCBs were heat treated at 1150 °C under argon gas flowing at 1 L/min into a horizontal tube furnace. Samples were placed into an alumina crucible and positioned in the cold zone of the furnace for 5 min to avoid thermal shock, and then pushed into the hot zone, with specimens exposed to high temperatures for 10 and 20 min. After treatment, residues were pulled back to the cold zone and kept there for 5 min to avoid thermal cracking and re-oxidation. This process resulted in the generation of a metallic phase in the form of droplets and a carbonaceous residue. The metallic phase was formed of copper-rich red droplets and tin-rich white droplets along with the presence of several precious metals. The carbonaceous residue was found to consist of slag and ～30% carbon. The process conditions led to the segregation of hazardous lead and tin clusters in the metallic phase. The heat treatment temperature was chosen to be above the melting point of copper; molten copper helped to concentrate metallic constituents and their separation from the carbonaceous residue and the slag. Inert atmosphere prevented the re-oxidation of metals and the loss of carbon in the gaseous fraction. Recycling e-waste is expected to lead to enhanced metal recovery, conserving natural resources and providing an environmentally sustainable solution to the management of waste products.     

Protection of workers’ mental health in Québec: Do general duty clauses allow labour inspectors to do their job?

Given that no specific provisions of the Occupational Health and Safety (OHS) Act explicitly deal with psychosocial risk factors, in Québec, occupational health and safety inspectors employed by the Commission de la santé et de la sécurité du travail (CSST) address psychosocial hazards under the Act’s general duty clause. This general duty clause and related provisions require that all employers eliminate hazards at source and protect the health of workers. More specifically, they are required to ensure that the organisation of work does not adversely affect the safety or health of the worker. Since 2004, Québec minimum standards legislation has also provided for the right of workers to an environment that is free from psychological harassment.Written from both a legal and public health perspective, this paper has two primary objectives: first, to better understand the potential and limits of the current legislative framework for the protection of the mental health of workers and second, to describe how scientific knowledge related to high risk situations for the mental health of workers might inform interventions by inspectors for the protection of workers’ mental health.