Occurrence and distribution of organochlorine pesticides - lindane, p,p'-DDT, and heptachlor epoxide - in surface water of China

Persistent organochlorine pesticides pollutants (OCPs) have been reported to occur at relatively high concentrations in some Chinese waters. In order to map the distribution of organochlorine pesticides in the surface water throughout China, samples were collected from over 600 sites in seven major river basins and three main internal rivers drainage areas during 2003 and 2004. The surface water samples were analyzed for the representative organochlorine pesticides contaminants including lindane (gamma-HCH), p,p'-DDT and heptachlor epoxide. In general, the most frequently detected compound was lindane, being detected in 83.9% of samples (mean=31.3 ng/l; range <0.17-860 ng/l), and the highest concentration was present in the Yellow River basin. p,p'-DDT was detected in 63.1% of the samples collected (mean=14.6 ng/l; range <0.14-368 ng/l) with the highest concentration present in the Huaihe River basin. Heptachlor epoxide was detected in only 9.3% of water samples (range <0.11-10 ng/l). Measured concentrations for the three compounds were low and rarely exceed the environment quality standard for surface water of China. Lindane was more frequently detected at much higher concentrations in the rivers of northern China compared with those of southern China. The sites with higher concentration of lindane and p,p'-DDT mainly occurred in the Yellow River and Huaihe River basins, so the results of this investigation indicate that the organochlorine pesticide contamination of Yellow River and Huaihe River basins should be of particular concern relative to the other basins. When compared with other regions of the world, it appears that the Chinese surface water is moderately polluted by lindane and p,p'-DDT.     

The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates

This article summarizes a study that evaluated a new decontamination technique for the mitigation and abatement of hazardous dust and particulates. Traditional decontamination methods are time‐consuming, expensive, can create airborne hazards, and do not always bring the concentration of the contaminant to acceptable levels. The use of the removable thin film coating will increase efficiency, will not generate airborne hazards, will decrease costs, and, with one application, will bring the hazardous dust concentrations to acceptable levels. Qualitative tests demonstrated that the removable thin film coating reduced the amount of visible luminescent dust (a surrogate for hazardous dust) from various surfaces. It also indicated that wherever there were minute scratches, the coating did not remove all of the dust. However, the qualitative tests showed that this decontamination method worked well as a preventative method, protecting clean areas from becoming contaminated when exposed to the luminescent dust. Further investigation was conducted using a scanning electron microscope (SEM) and carbon dust. Overall, the SEM experiment demonstrated that there was a statistically significant (p = 0.00007) removal of carbon dust (less than 10 μm in size) from surfaces with crevasses larger than 3 μm. The SEM also revealed that there were some limitations where there were large clusters of carbon dust; in these instances, the coating would tear and remain on the sample surface. One method to resolve this limitation involved adding Kevlar^TM fibers to the removable thin film coating. It was thought that this would increase the strength of the coating and eliminate the coating from tearing when removing large clusters of a contaminant. Unfortunately, this did not alleviate the issue. The use of an engineered textile, saturated with the coating, appeared to eliminate the problem with the coating not being able to remove the contaminant from the minute surface scratches and improved the removal process of the coating. © 2008 Wiley Periodicals, Inc.     

The 2011 flood event in the Mekong Delta: preparedness,response, damage and recovery of private households and small businesses

Floods frequently cause substantial economic and human losses, particularly in developing countries. For the development of sound flood risk management schemes that reduce flood consequences, detailed insights into the different components of the flood risk management cycle, such as preparedness, response, flood impact analyses and recovery, are needed. However, such detailed insights are often lacking: commonly, only (aggregated) data on direct flood damage are available. Other damage categories such as losses owing to the disruption of production processes are usually not considered, resulting in incomplete risk assessments and possibly inappropriate recommendations for risk management. In this paper, data from 858 face‐to‐face interviews among flood‐prone households and small businesses in Can Tho city in the Vietnamese Mekong Delta are presented to gain better insights into the damage caused by the 2011 flood event and its management by households and businesses.     

土地利用变化驱动下的上海市区水灾灾情模拟

对上海市区近50年来的土地利用结构变化进行了重建，并计算了由土地利用变化引起的上海市区水位变化量。以特定的1962年水灾为参照，模拟在同等雨强情况下，由土地利用结构变化和地面沉降引起的淹没范围的变化以及由此带来的水灾损失的变化。结果表明，在49mm／d降水条件下，由于土地利用的变化，使2001年的径流系数比1950年增大了34．0％，2001年的水位比1950年增高了45．9％；2001年的水灾灾情为1950年的1．0629倍；即使在目前千年一遇的防洪标准下，亦可造成相当于2001年地均GDP值0．088％(约为4．5亿元人民币)的损失，这是1991年相应数值的220倍。     

Building an integrated environmental,health, and safety management system

This article discusses an integrated management system that aligns and integrates the various environmental, health, and safety functions and disciplines. This model is easily adopted to provide performance measures required to satisfy Responsible Care®, ISO 14001, and the European Union EMAS requirements.     

锥形件拉伸失效与拉伸模

锥形零件拉伸时,容易出现拉裂、起皱。通过对各影响因素分析,修改拉伸模,解决锥形零件的拉伸失效。