Nickel oxide nanoparticles exert cytotoxicity via oxidative stress and induce apoptotic response in human liver cells (HepG2)

Increasing use of nickel oxide nanoparticles (NiO NPs) necessitates an improved understanding of their potential impact on human health. Previously, toxic effects of NiO NPs have been investigated, mainly on airway cells. However, information on effect of NiO NPs on human liver cells is largely lacking. In this study, we investigated the reactive oxygen species (ROS) mediated cytotoxicity and induction of apoptotic response in human liver cells (HepG2) due to NiO NPs exposure. Prepared NiO NPs were crystalline and spherical shaped with an average diameter of 44 nm. NiO NPs induced cytotoxicity (cell death) and ROS generation in HepG2 cells in dose-dependent manner. Further, ROS scavenger vitamin C reduced cell death drastically caused by NiO NPs exposure indicating that oxidative stress plays an important role in NiO NPs toxicity. Micronuclei induction, chromatin condensation and DNA damage in HepG2 cells treated with NiO NPs suggest that NiO NPs induced cell death via apoptotic pathway. Quantitative real-time PCR analysis showed that following the exposure of HepG2 cells to NiO NPs, the expression level of mRNA of apoptotic genes (bax and caspase-3) were up-regulated whereas the expression level of anti-apoptotic gene bcl-2 was down-regulated. Moreover, activity of caspase-3 enzyme was also higher in NiO NPs treated cells. To the best of our knowledge this is the first report demonstrating that NiO NPs caused cytotoxicity via ROS and induced apoptosis in HepG2 cells, which is likely to be mediated through bax/bcl-2 pathway. This work warrants careful assessment of Ni NPs before their commercial and industrial applications.     

Is moral hazard good for the environment? Revenue insurance and chemical input use

Using farm level data we evaluate the input use and environmental effects of revenue insurance. A priori, the moral hazard effect on input use is indeterminate. This paper empirically assesses the input use impact of the increasingly popular, and federally subsidized, risk management instrument of revenue insurance and the extent to which its effects on input use may differ from those of the older yield based instruments. We conclude that among winter wheat farmers, those who purchase revenue insurance tend to spend less on fertilizers but do not appreciably alter pesticide expenditures. Thus, any improved environmental outcomes due to crop insurance are likely due to reduced fertilizer not pesticide use. When the environmental indicators included indicated a potential environmental fragility (i.e. high erosion, pesticide leaching or pesticide runoff potential), the input use equation suggested that fertilizer expenditures decreased. Revenue insurance undoubtedly further reduces fertilizer applications on these fields as well, but the marginal environmental benefit of revenue insurance is lessened because the reduction, where it matters most, accrues on land on which fertilizer use has already been curtailed to some degree.     

Co-exposure of Bi2O3 nanoparticles and bezo[a]pyrene-enhanced in vitro cytotoxicity of mouse spermatogonia cells

Environmental Science and Pollution Research - Recent attention has been focused on reproductive toxicity of nanoscale materials in combination with pre-existing environmental pollutants. Due to...     

Arsenic concentration in rice, fish, meat and vegetables in Cambodia: a preliminary risk assessment

To assess arsenic contaminations and its possible adverse health effects, food samples were collected from Kandal, Kratie and Kampong Cham in Cambodia. The highest and the lowest concentrations were observed in fish (mean 2,832 ng g^?1, ww) collected from Kandal province and cattle stomach (1.86 ± 1.10 ng g^?1, ww) collected from Kratie, respectively. The daily intake of arsenic via food consumption was 604, 9.70 and 136 μg day^?1 in Kandal, Kratie and Kampong Cham, respectively. The arsenic dietary intake in Kandal ranked No. 1 among all the 17 compared countries or regions. Fish consumption contributed the greatest proportion of total arsenic daily intake in Kandal (about 63.0 %) and Kampong Cham (about 69.8 %). It is revealed to be a much more important exposure pathway than drinking water for residents in Kampong Cham. The results of risk assessment suggested that the residents in Cambodia, particularly for people in Kandal province, suffer high public health risks due to consuming arsenic-contaminated food.     

Biofuel production,hydrogen production and water remediation by photocatalysis,biocatalysis and electrocatalysis

The energy crisis and environmental pollution have recently fostered research on efficient methods such as environmental catalysis to produce biofuel and to clean water. Environmental catalysis refers to green catalysts used to breakdown pollutants or produce chemicals without generating undesirable by-products. For example, catalysts derived from waste or inexpensive materials are promising for the circular economy. Here we review environmental photocatalysis, biocatalysis, and electrocatalysis, with focus on catalyst synthesis, structure, and applications. Common catalysts include biomass-derived materials, metal–organic frameworks, non-noble metals nanoparticles, nanocomposites and enzymes. Structure characterization is done by Brunauer–Emmett–Teller isotherm, thermogravimetry, X-ray diffraction and photoelectron spectroscopy. We found that water pollutants can be degraded with an efficiency ranging from 71.7 to 100%, notably by heterogeneous Fenton catalysis. Photocatalysis produced dihydrogen (H₂) with generation rate higher than 100 μmol h⁻¹. Dihydrogen yields ranged from 27 to 88% by methane cracking. Biodiesel production reached 48.6 to 99%.

     

Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

Journal of Polymers and the Environment - Nowadays, researchers continue studies for alternative materials to replace the redundant petroleum-based products. The combination of various polymer...     

A Framework for Incorporating the Impact of Water Quality on Water Supply Stress: An Example from Louisiana,USA

Water of poor quality can directly impact the budget of water available for key user groups. Despite this importance, methods for quantifying the impact of water quality on water availability remain elusive. Here, we develop a new framework for incorporating the impact of water quality on water supply by modifying the Water Supply Stress Index (WaSSI). We demonstrate the usefulness of the framework by investigating the impact of high salinity waters on the availability of irrigation water for agriculture in Louisiana. The WaSSI was deconstructed into sectoral components such that the total available water supply could be reduced for a particular demand sector (agricultural irrigation in this example) based on available water quality information. The results for Louisiana highlight substantial impacts on water supply stress for farmers attributable to the landward encroachment of saline surface water and groundwater near the coast. Areas of high salinity near the coast also increased the competition for freshwater resources among the industrial, municipal, and agricultural demand sectors in the vicinities of the municipal areas of Lake Charles, Lafayette, and Baton Rouge, Louisiana. The framework developed here is easily adaptable for other water quality concerns and for other demand sectors, and as such can serve as a useful tool for water managers.     

Chapter one: exposure measurements

Determining human exposure to suspended particulate concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these are typically measured with time-integrated samples on filters that are later submitted to laboratory analyses. This requires substantial sample handling, quality assurance, and data reduction. Newer technologies are being developed that allow in-situ, time-resolved measurements for mass, carbon, sulfate, nitrate, particle size, and other variables. These are large measurement systems that are more suitable for fixed monitoring sites than for personal applications. Human exposure studies need to be designed to accomplish specific objectives rather than to serve too many purposes. Resources need to be divided among study design, field sampling, laboratory analysis, quality assurance, data management, and data analysis phases. Many exposure projects allocated too little to the non-measurement activities.     

Analysis of air pollution at Shuaiba industrial area in Kuwait

A study has been conducted over a period of one year on measurements of air pollution in the Shuaiba Industrial Area (SIA) of Kuwait. The study included analysis of pollutant behaviour relative to the wind speed and direction. SIA comprises several large scale industries including three petroleum refineries, two power plants, two fertilizer plants, a cement plant, a chlorine and soda plant, a commercial harbour and two large oil loading terminals. Measurements of 15 parameters have been carried out every 5 minutes using a mobile laboratory fitted with an automatic calibrator and a data storage system. The pollutants studied include methane, non‐methane hydrocarbons (NMHC), carbon monoxide, carbon dioxide, nitrogen oxides (NO, NO₂, and NO _x ), sulphur dioxide, ozone and suspended dust. Meteorological parameters monitored simultaneously include wind speed and direction, air temperature, relative humidity, solar radiation, and barometric pressure. The air quality data collected using the mobile laboratory have been used to calculate the diurnal and monthly variations in the major primary and secondary pollutants. Distribution levels of these pollutants relative to wind direction and speed have also been used in the analysis. The results show large diurnal variations in some pollutant concentrations. Generally, two types of concentration variations have been found, depending on whether the species is a primary or a secondary pollutant. Diurnal variations with two maxima were observed in the concentrations of primary pollutants including NO, SO₂, NMHC, CO and suspended dust, whereas a single maximum was observed for secondary pollutants such as O₃and NO₂. The monthly variations of SO₂and NO _x showed maximum values during the warm months. However, ozone showed a quite marked seasonal variation with maxima during spring and late summer and a minimum during the early summer. The results also indicated a common source for NO _x , SO₂, NMHC, CO and suspended dust to the North‐West (NW) of the monitoring station. Moreover for NO _x and SO₂, another less significant source is to the South‐South‐West (SSW) and South‐West (SW) of the monitoring station.