Thermal Properties and Biodegradability Studies of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

For investigating the relationship between thermal properties and biodegradability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), several films of PHBV containing different polyhydroxyvalerate (HV) fractions were subjected to degradation in different conditions for up to 49 days. Differential scanning calorimetry (DSC), thermogravimetry (TG), specimen weight loss and scanning electron microscopy (SEM) were performed to characterize the thermal properties and enzymatic biodegradability of PHBV. The experimental results suggest that the degradation rates of PHBV films increase with decreasing crystallinity; the degradability of PHBV occurring from the surface is very significant under enzymatic hydrolysis; the crystallinity of PHBV decreased with the increase of HV fraction in PHBV; and no decrease in molecular weight was observed in the partially-degraded polymer.     

Field Testing and Computer Modeling of an Oxygen Combustion System at the EPA Mobile Incinerator

The LINDE® Oxygen Combustion System has been demonstrated successfully at the EPA Denney Farm site as part of the modified EPA mobile incinerator. This paper describes the field testing results and computer modeling of the LINDE system. The oxygen system enables the EPA unit to incinerate dioxin and PCB contaminated soil at a consistent rate of 4000 lb/h—200 percent of the original maximum capacity. The pure oxygen combustion system improved the thermal efficiency of the incinerator by over 60 percent and reduced the flue gas volume dramatically. Therefore, the dust carryover problem was mitigated. The destruction and removal efficiencies of hazardous wastes exceeded EPA requirements.

The design of the proprietary burner allows the use of up to 100 percent oxygen in place of air for incineration with improvements over conventional oxy-fuel burners. As a result, the temperature distributions in the rotary kiln are uniform and NO_x emissions are low.

The oxygen combustion system, controlled by a programmable controller, provided much better response and flexibility than conventional air based systems. The system generated a stable flame and responsed well to the transient conditions of the rotary kiln. Kiln puff occurrence was virtually eliminated in the operation of the mobile incinerator.

A computer model of the incinerator was developed and used for the process design of the LINDE system. The model predicted the test results reasonably well. This model can be a useful tool in the design and operation of rotary kiln incineration systems.     

Mechanical properties of incineration bottom ash: The influence of composite species

The mechanical properties, including strength, deformational behavior, and wetting softening phenomena of municipal solid waste incinerator (MSWI) bottom ash are one of the major concerns for reuse applications. However, owing to the complex constituents of municipal solid waste, the properties of MSWI bottom ash are often highly variable. A series of artificial specimens with controlled chemical components were tested in this study. The test results show that the artificial bottom ash possesses the following mechanical characteristics: (1) for the strength, the frictional angles of the bottom ash under dry and saturated conditions vary from 34.8° to 51.1° and 26.0° to 37.2°, respectively; (2) for the deformation, the shear stiffness increases with the normal stress arises and degrades upon increased shearing; (3) significant wetting degradation of the strength and stiffness were observed.The multi-variable regression analysis was conducted to evaluate the associated influence of the chemical components on the strength. Among the evaluated components, Fe₂O₃ and Al₂O₃ are key factors; an increase in either results in higher strength at both dry and saturated conditions. The results were used to propose empirical relationships for ?_dry and ?_sat, expressed in terms of Fe₂O₃ and Al₂O₃. Accordingly, a strength classification chart is proposed for engineering purposes.     

Safety assessment for accident of cooling loop failure (ACLF) in lunar nuclear power reactor (LNPR)

The safety assessment of an accident in the lunar base power plant is investigated for the stability of the operation. The lunar surface reactor is modeled for this study. The accident of cooling loop failure (ACLF) is one of the important scenarios for the virtual case in the moon nuclear power plant (NPP). The newly designed lunar nuclear power reactor (LNPR) is suggested for the commercial purpose. The system dynamics (SD) is used for the simulation of the safety assessment. The cyclic variation of the lunar surface temperature can affect to the physical situation of the coolant, which is expressed by the time step. The result shows the performance possibility of the long term cooling increases slightly in the short period of the time step. The dynamical simulation of the lunar environment is performed for the conceptual design of the NPP.     

Vertical distribution and characteristics of soil humic substances affecting radionuclide distribution

The humic substances extracted from different soil depths are separated into humic (HA) and fulvic (FA) acids, and characterized for their chemical composition, proton exchange capacity, spectroscopic characteristics and binding properties to the europium ion. The chemical and spectroscopic results show that FA compared to HA has a relatively high O/C ratio, high acidic functional group contents and low aromatic contents. The synchronous fluorescence spectroscopic results show that the stability constant (K) of the soil humic substances with Eu(III) ion tends to increase as the soil depth becomes deeper, and HA has a slightly stronger binding ability than FA. The measured total site concentrations (C(L)) reveal that Eu(III) ion is loaded onto HA by 62-77% of the total acid sites, but FA is only approximately 50% covered by Eu(III) ion. Information could be useful in understanding the migration of radionuclides in soil layer.