Effects of Temperature and Relative Humidity on Polylactic Acid Plastic Degradation

Three high molecular weight (120,000 to 200,000 g mol^–1) polylactic acid (PLA) plastic films from Chronopol (Ch-I) and Cargill Dow Polymers (GII and Ca-I) were analyzed for their degradation under various temperature and relative humidity (RH) conditions. Two sets of plastic films, each containing 11 samples, were randomly hung in a temperature/humidity-controlled chamber by means of plastic-coated paper clips. The tested conditions were 28, 40, and 55°C at 50 and 100% RH, respectively, and 55°C at 10% RH. The three tested PLA films started to lose their tensile properties when their weight-average molecular weight (M _w) was in the range of 50,000 to 75,000 g mol^–1. The average degradation rate of Ch-I, GII, and Ca-I was 28,931, 27,361, and 63,025 M _w/week, respectively. Hence, GII had a faster degradation rate than Ch-I and Ca-I under all tested conditions. The degradation rate of PLA plastics was enhanced by the increase in temperature and relative humidity. This trend was observed in all three PLA plastics (Ca-I, GII, and Ch-I). Of the three tested films, Ch-I was the first to lose its mechanical properties, whereas Ca-I demonstrated the slowest loss, with mechanical properties under all tested conditions.     

Growth and macronutrient removal of water hyacinth in a small secondary sewage treatment plant

Studies have been made of the growth characteristics of water hyacinth, Eichhornia crassipes (Mart.) Solms, and its ability to remove N, P and K, in a secondary settling pond of a small secondary sewage treatment plant serving both the academic and residential blocks of the Swire Marine Laboratory, University of Hong Kong. The treatment plant consists of, in series, a primary settling tank, a trickling filter compartment and a secondary settling pond from which part of the treated wastewater is recycled to the primary settling tank while the remaining effluent (1 to 2 m³ daily) mixes with and hence is diluted by the outflowing seawater from the aquarium system of the Swire Marine Laboratory before discharge to the sea. Samples of wastewater have been taken regularly from the primary sedimentation pond, the outflow of the trickling filter, the secondary settling pond and the effluent of the treatment plant (before mixing with aquarium outflow) since January, 1992. Physical, chemical and biological characteristics of the samples have been determined and are typical of secondary effluents, with a mean pH of about 7.5, total solids 1200 mg L⁻¹, suspended solids 45 mg L⁻¹, conductivity 2000 μS cm⁻¹, salinity 1 ppt, dissolved oxygen 2 mg L⁻¹, BOD₅ 45 mg L⁻¹, Kjeldahl-N 30 mg L⁻¹, NH₄,-N 25 mg L⁻¹, NO₃-N 4 mg L⁻¹, total P 10 mg L⁻¹, K 35 mg L⁻¹ and total coliforms of less than 10⁵ colonies 100 ml⁻¹.Water hyacinth plants have been stocked in the secondary settling pond as an integral part of the treatment plant so as to improve the quality of, as well as to retrieving and recycling nutrient elements from, the wastewater. The plants are periodically harvested to maintain an active growing crop. The growth rate, standing crop biomass, tissue nutrient composition, nutrient storage and accumulation rate of two growth cycles, one from February 25 to March 18 (mean temperature 17.6°C) and the other from 22 April to 12 May (24.8°C) are reported. The water hyacinth assumed a relatively high standing crop biomass of 10 kg m⁻² (5 to 6 t DM ha⁻¹), and growth rates of 48 and 225 g m⁻² day⁻¹, respectively, for the first and second growth period. Nutrient storage capacities were relatively high, at about 20, 7.5 and 16.5 g m⁻² for N, P and K, respectively. The nutrient composition was very high, reaching 5.42% for N, 1.97 for P, and 4.57 for K. Both the stem and lamina accumulated high levels of N, while the petiole had the highest level of P and K. Apart from nutrient removal, the water hyacinth also helped to decrease the suspended solids, BOD₅ value and total coliforms of the wastewater.It is concluded that water hyacinth improves the quality of wastewater in such small-scale sewage treatment plants and it is recommended that frequent harvests of water hyacinth would increase the treatment efficiency, especially during the active growing season with high temperatures coupled with intense solar radiation.     

Biomass from phytopathogens and culture conditions improve Penicillium chrysogenum antimicrobial activity and antifungal compounds production

The present study evaluated the effect of culture conditions and phytopathogenic strain co-culture on the production of antimicrobial metabolites and antifungal activity of Penicillium chrysogenum R1, which PCR identified. Antimicrobial activity was determined using the Hunter-Hunter experimental design with three factors (pH, incubation temperature, and inoculum, at two levels each). The antifungal metabolites, β 1-3 glucanase and chitinase, produced in the presence of live and inactivated Fusarium oxysporum Fsox C11 biomass, were evaluated using HPLC-MS and GC-MS. Results showed that P. chrysogenum inhibited the growth of five phytopathogenic fungal strains, and the most significant inhibition was observed for F. oxysporum Fsox C11. The best conditions to achieve the highest antifungal activity of the cell-free extract were pH 7, 28°C, 1 × 10⁶ spores/mL, and 144 h of fermentation, observing 86% inhibition of F. oxysporum Fsox C11 growth. Production of antifungal metabolites such as 1,4-benzoquinone imine, viridicatic acid, phenol-5-methyl-2-(1-methyl ethyl), and hydrolytic enzymes β 1-3 glucanase and chitinase was detected. The results define the perspective in designing new processes and products for biocontrol phytopathogens.     

A meta‐analysis of the antecedents of work–family enrichment

This study meta‐analytically examined theoretically derived antecedents of both directions of work–family enrichment (sometimes labeled facilitation or positive spillover), namely, work–family enrichment and family–work enrichment. Contextual and personal characteristics specific to each domain were examined. Resource‐providing (e.g., social support and work autonomy) and resource‐depleting (e.g., role overload) contextual characteristics were considered. Domain‐specific personal characteristics included the individuals' psychological involvement in each domain, the centrality of each domain, and work engagement. Results based on 767 correlations from 171 independent studies published between 1990 and 2016 indicate that several contextual and personal characteristics have significant relationships with enrichment. Although those associated with work tend to have stronger relationships with work–family enrichment and those associated with family tend to have stronger relationships with family–work enrichment, several antecedent variables have significant relationships with both directions of enrichment. Resource‐providing contextual characteristics tend to have stronger relationships with enrichment than do resource‐depleting characteristics. There was very little evidence of gender being a moderator of relationships between contextual characteristics and enrichment. Lastly, meta‐analytic structural equation modeling provided evidence that a theoretical path model wherein work engagement mediates between several contextual characteristics and enrichment is largely generalizable across populations.     

Isolation and identification of potential fungal species for spent engine lubrication oil remediation in Peninsular Malaysia

Improper disposal and spills of spent engine oil into the environment can result in contamination, which eventually affects humans through the food chain. Mycoremediation is an effective and inexpensive alternative to clean up spent engine oil contamination. In recent work, the potential effectiveness of fungi for degrading spent engine oil was confirmed, with the species identified through molecular identification. Fungi that were able to grow in Bushnell Haas Broth supplied with spent engine oil were identified with the potential to utilize spent engine oil as a carbon source. Six species of fungi namely Penicillium simplicissimum, Aspergillus nidulans, Aspergillus niger, Trichoderma longibrachiatum, Aspergillus ustus, and Aspergillus flavus were successfully identified in this study. Over a course of seven days, P. simplicissimum (21.11 percent) was identified as the most effective fungi in degrading spent engine oil, followed by A. nidulans (17.75 percent), A. niger (15.85 percent), T. longibrachiatum (15.12 percent), A. ustus (15.02 percent), and A. flavus (11.80 percent). As these species of fungi were isolated from the natural environment in Peninsular Malaysia, the potential of using these fungi as mycoremediation of spent engine oil was therefore confirmed.     

Accumulation of heavy metals in native Andean plants: potential tools for soil phytoremediation in Ancash (Peru)

Metal contamination is a recurring problem in Peru, caused mainly by mine tailings from a past active mining activity. The Ancash region has the largest number of environmental liabilities, which mobilizes high levels of metals and acid drainages into soils and freshwater sources, posing a standing risk on human and environmental health. Native plant species spontaneously growing on naturally acidified soils and acid mine tailings show a unique tolerance to high metal concentrations and are thus potential candidates for soil phytoremediation. However, little is known about their propagation capacity and metal accumulation under controlled conditions. In this study, we aimed at characterizing nine native plant species, previously identified as potential hyperaccumulators, from areas impacted by mine tailings in the Ancash region. Plants were grown on mine soils under greenhouse conditions during 5 months, after which the concentration of Cd, Cu, Ni, Pb, and Zn was analyzed in roots, shoots, and soils. The bioaccumulation (BAF) and translocation factor (TF) were calculated to determine the amount of each metal accumulated in the roots and shoots and to identify which species could be better suited for phytoremediation purposes. Soil samples contained high Cd (6.50–49.80 mg/kg), Cu (159.50–1187.00 mg/kg), Ni (3.50–8.70 mg/kg), Pb (1707.00–4243.00 mg/kg), and Zn (909.00–7100.00 mg/kg) concentrations exceeding national environmental quality standards. After exposure to mine tailings, concentrations of metals in shoots were highest in Werneria nubigena (Cd, 16.68 mg/kg; Cu, 41.36 mg/kg; Ni, 26.85 mg/kg; Zn, 1691.03 mg/kg), Pennisetum clandestinum (Pb, 236.86 mg/kg), and Medicago lupulina (Zn, 1078.10 mg/kg). Metal concentrations in the roots were highest in Juncus bufonius (Cd, 34.34 mg/kg; Cu, 251.07 mg/kg; Ni, 6.60 mg/kg; Pb, 718.44 mg/kg) and M. lupulina (Zn, 2415.73 mg/kg). The greatest BAF was calculated for W. nubigena (Cd, 1.92; Cu, 1.20; Ni, 6.50; Zn, 3.50) and J. bufonius (Ni, 3.02; Zn, 1.30); BCF for Calamagrostis recta (Cd, 1.09; Cu, 1.80; Ni, 1.09), J. bufonius (Cd, 3.91; Cu, 1.79; Ni, 18.36), and Achyrocline alata (Ni, 137; Zn, 1.85); and TF for W. nubigena (Cd, 2.36; Cu, 1.70; Ni, 2.42; Pb, 1.17; Zn, 1.43), A. alata (Cd, 1.14; Pb, 1.94), J. bufonius (Ni, 2.72; Zn, 1.63), and P. clandestinum (Zn, 1.14). Our results suggest that these plant species have a great potential for soil phytoremediation, given their capability to accumulate and transfer metals and their tolerance to highly metal-polluted environments in the Andean region.     

On a Temporal Investigation of Hurricane Strength and Frequency

Hurricanes originating in the West Atlantic often have devastating consequences on the cities in the US east coast, both monetary and otherwise, and hence pose a source of considerable concern to several authorities. The possibility of a connection between global warming in general and an increased frequency of these strong hurricanes is well researched, but is still actively debated. The present work tries to promote the use of a smoothing statistic termed empirical recurrence rates and to advocate the use of another, termed empirical recurrence rates ratio in a bid to better understand the rich history of these storms on one hand and to make appropriate inferences on the other, so that some light can be shed on the acceptability of conjectures held by renowned climate scientists. The methods introduced are intuitive and simple to implement and should find wide applications in diverse disciplines.

     

Behavior of buoyancy and momentum controlled hydrogen jets and flames emitted into the quiescent atmosphere

As an effort to improve the prediction of hydrogen dispersion in the atmosphere, effects of buoyancy acting on the hydrogen jets formed by releasing from high pressure vessels are investigated analytically and experimentally. For the analytical study, an integral analysis for buoyant jets and flames is carried out to yield the closed formula describing the jet and flame shapes, including their trajectory and horizontal and vertical lengths corresponding to the critical concentrations. Because the density of hydrogen after releasing from high pressure storage conditions is much close to that of helium than that of hydrogen at room temperature, helium is used as the hydrogen surrogate for the buoyant jet experiments, which were performed by visualizing the jet dispersing in the atmosphere up to the jet Reynolds number Re ～ 2400. The trajectories obtained by the integral analysis and experiments agree relatively well until the transition to turbulence occurs. A further estimate for jets and flames is made by using the integral analysis as a preliminary design to the experiments involving a much greater hydrogen release. Once the comparative investigation of the larger scale experiments with the integral analysis, we anticipate that a more universal hydrogen jet and flame data can be obtained, which perhaps leads to a better safety distance of hydrogen stations.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.