Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet

Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.     

Do renewable energy and natural gas consumption mitigate CO2 emissions in the USA? New insights from NARDL approach

Environmental Science and Pollution Research - This article attempts to explore the asymmetric impact of renewable energy and natural gas consumptions on CO2 emissions for the selected ten most...     

Fetal bradycardia in the first trimester: an unusual presentation of atrial extrasystoles

We report a fetus with fetal bradycardia at 13 weeks of gestation secondary to atrial extrasystoles. The fetus subsequently developed paroxysmal supraventricular tachycardia and hydrops fetalis. The cardiac arrhythmia recovered spontaneously without any medical intervention. This case illustrates that atrial ectopic beats can present in the first trimester with fetal bradycardia. Rapidly evolving hydrops fetalis secondary to supraventricular tachycardia can develop, warranting close monitoring with weekly heart rate assessment. Fetal bradycardia secondary to atrial extrasystole should be differentiated from first trimester sinus bradycardia and those associated with major structural cardiac abnormality, which have a high fetal loss rate. Copyright © 2002 John Wiley & Sons, Ltd.     

硅胶腕带被动采集多环芳烃的可行性分析

多环芳烃（polycyclic aromatic hydrocarbons,PAHs）对人体危害巨大,目前关于人体暴露于大气环境PAHs研究主要以主动采样方式开展。硅胶腕带作为一种新的大气被动采样装置,具有体积小、价格低、耐磨耐热、无毒无味等优点,适合人体环境暴露监测。国际上研究刚起步,尚未建立完善的腕带被动采样与主动采样技术之间的定量关系。本研究于2019年秋冬季和2021年冬季在西安市城区,同时开展硅胶腕带被动采样与大气主动采样对低分子量（MW＜203 g·mol^?1）PAHs的对比实验,力求建立两者的联系。2019年和2021年西安冬季大气中低分子量PAHs浓度分别为(52.81±14.76) ng·m^?3和(134.59±39.48) ng·m^?3,与前人研究相当。相对应的腕带浓度为(183.07±40.43) ng·d^?1和(524.99±150.32) ng·d^?1。Pearson相关分析发现：萘、苊烯、1-甲基萘、2-甲基萘、荧蒽以及总PAHs的主、被动采样之间显著相关（P＜0.05）,相关系数均大于0.4,证明硅胶腕带被动采样方法适用于低分子量PAHs的人体暴露监测。     

A study on torrefaction characteristics of waste sawdust in an auger type pyrolyzer

Torrefaction is thermo-chemical process which can improve solid fuel quality as well as grindability. In previous studies, torrefaction has been studied mainly for removal of moisture and for improving grindability. In this experiment, the characteristics of torrefied waste sawdust were studied especially for its energy yield. Hence, torrefaction was performed on varying reaction temperatures (200, 220, 240, 260, 280, 300 °C) and solid residence time (10, 30, 60 min). The results indicated that the yield of torrefaction decreases with increasing temperature and residence time. It was found that above 280 °C, the yield got remarkably decreased. The lowest yield was obtained at the residence time of 60 min. It was also noticed that the HHV of torrefied samples increases with increasing temperature. The highest HHV was found to be 26.09 MJ/kg which was obtained at 60 min and 300 °C. However, the highest energy yield was obtained to be 104.17 % which was noticed at 30 min and 260 °C.     

Characterization of food waste from different sources in Hong Kong

Food waste from different sources or at different generation stages may have different compositional characteristics and is therefore suitable for recycling into different products. To have a better understanding of their chemical composition, five food waste types were collected, namely, household kitchen waste (HH), preconsumption and postconsumption food waste from a hotel (Hpr and Hpo), wet market food waste (WM) and kitchen waste from a Chinese restaurant (CR), and their compositions were assessed monthly for 1 year. They served as suitable feedstock for various conversion technologies according to their chemical profiles. HH and CR had higher crude protein content (26%) and considerable amounts of minerals, making them nutritionally suitable for feeding animals. Preconsumption food wastes Hpr and WM had more favorable C:N ratios (16.5–17.4) and crude fat contents (4.6–6.5%) as feedstock for composting. Postconsumption food wastes were potential feedstock for the production of biogas and biodiesel because of the higher dry matter (>26%) and fat content (>13%). The coefficients of variation (CV) in all nutrients analyzed except Ca for postconsumption food wastes ranged from 5% to 37%, which showed lower temporal variability than preconsumption food wastes (CVs 10–131%). This implies that the composition of postconsumption food waste was relatively less fluctuating and can be considered a more reliable feedstock for food waste conversion.

Implications: Characterization of food waste composition from different sources and determination of their temporal variation were performed to understand their characteristics and facilitate sound food waste management. Separating food wastes according to their sources and types helps reduce their composition variability, and thus increases the consistence in food-waste-derived products and recycling success. Study on temporal variation indicates that postconsumption food wastes varied less with time and could serve as reliable feedstocks for food waste conversion.