Polymeric carbon nitride-based photocatalysts for the removal of nitrogen oxides: a review

Environmental Chemistry Letters - Air pollution in Chinese megacities by particulate matter and ozone is a major health problem originating partly from emissions of nitrogen oxides. Therefore,...     

On the relationship between ozone and its precursors in the Pearl River Delta: application of an observation-based model (OBM)

Background, aim, and scope  

Photochemical smog, characterized by high concentrations of O₃ and fine particles, is of great concern in the urban areas, in particular megacities and city clusters like the Pearl River Delta.     

Evaluation of the antifungal effects of bio-oil prepared with lignocellulosic biomass using fast pyrolysis technology

This study was performed to investigate the utility of bio-oil, produced via a fast pyrolysis process, as an antifungal agent against wood-rot fungi. Bio-oil solutions (25-100 wt.%) were prepared by diluting the bio-oil with EtOH. Wood block samples (yellow poplar and pitch pine) were treated with diluted bio-oil solutions and then subjected to a leaching process under hot water (70 °C) for 72 h. After the wood block samples were thoroughly dried, they were subjected to a soil block test using Tyromyces palustris and Trametes versicolor. The antifungal effect of the 75% and 100% bio-oil solutions was the highest for both wood blocks. Scanning electron microscopy analysis indicated that some chemical components in the bio-oil solution could agglomerate together to form clusters in the inner part of the wood during the drying process, which could act as a wood preservative against fungal growth. According to GC/MS analysis, the components of the agglomerate were mainly phenolic compounds derived from lignin polymers.     

Monitoring DNA damage in <Emphasis Type="Italic">Mytilus galloprovincialis</Emphasis> from the Kaštela Bay in Croatia

The Kaštela Bay (Croatia) is known, by the use of Fast micromethod, as an area with the highest level of genotoxic agents along the Adriatic Sea. The genotoxic impacts in Kastela Bay and the neighbouring Trogir Bay using micronucleus test and Comet assay with mussel (Mytilus galloprovincialis) haemocytes were assesed during 2003 and 2004. This location received effluents from various industries (brewery, cement plant, etc.), ports (oil and general port), the Split shipyard, Vranjic shipworks along with domestic sewage and agricultural discharge that enters the bay without any treatment. In the meantime, a lot of industries were closed and the input of pollutants were discontinued. The tested mussels from the 2003–2004 confirmed that mussels from Kaštela Bay were affected by genotoxic contaminants. The aim of our study was to assess genotoxic impacts on Mytilus galloprovincialis in the same area after six years using Comet Assay test. Our survey showed decreses of genotoxic damage on mussel haemocytes.     

Evaluation of the potential impact of polluted sediments using Manila clam Ruditapes philippinarum: bioaccumulation and biomarker responses

An assessment was made to monitor the short-term impact of heavily polluted sediments that may move out from the brackish man-made Lake Shihwa outside of the sea dike due to operations of a tidal power plant. Here, we exposed the Manila clam Ruditapes philippinarum collected from the western coast of Korea to natural sediment under lab condition for 96?h. Sediments were collected from Lake Shihwa and outside of the sea dike representing polluted and reference conditions, respectively. The results of chemical analysis revealed that the concentrations of nonylphenol and heavy metals in water and sediment from the inner region of Lake Shihwa were significantly higher than those of reference sediments. After 48 and 96?h of exposure, 30 specimens of clams were sampled from each experimental condition, and concentrations of nonylphenol and metals were measured in clams, water, and sediments. Several biomarkers, including concentrations of metallothionein-like proteins, and activities of the antioxidant enzymes glutathione S-transferase and catalase were determined in clams to characterize the effects of polluted sediments to clams. After 96?h of exposure, R. philippinarum assimilated nonylphenol up to 71 times compared to initial concentrations. However, there was no apparent uptake of heavy metals into the clams. Additionally, antioxidant enzymes exhibited higher activities in clams exposed to the polluted sediment. The results of the present study with physiological responses in R. philippinarum suggest that sediment transportation caused by the operation of a tidal power plant in Lake Shihwa will have striking effects on benthic organisms in the adjacent coastal area.     

Effect of coplanar PCB concentration on dechlorinating microbial communities and dechlorination in estuarine sediments

The effect of concentration of coplanar PCB on the dechlorinating microbial community and dechlorination were investigated in anoxic estuarine sediment collected from Er-Jen River and enriched with 10 and 50 mg L⁻¹ of 3,4,4′,5-tetrachlorobiphenyl, 3,3′,4,4′,5-pentachlorobiphenyl, and 3,3′,4,4′,5,5′-hexachlorobipheny. Dechlorination rates were similar in the cultures enriched with 10 and 50 mg L⁻¹ of 3,4,4′,5-tetrachlorobiphenyl, whereas significantly higher dechlorination rates were observed in cultures enriched with 10 mg L⁻¹ of 3,3′,4,4′,5-pentachlorobiphenyl. No dechlorination was observed in sediment slurries enriched with 3,3′,4,4′,5,5′-hexachlorobipheny. Para dechlorination occurred prior to meta dechlorination during reductive dechlorination of 3,4,4′,5-tetrachlorobiphenyl and 3,3′,4,4′,5-pentachlorobiphenyl. GC-MS and denaturing gradient gel electrophoresis (DGGE) were used to detect dechlorination products and dechlorinating microorganisms in the enriched sediment cultures during the process of degradation. Two Chloroflexi phylotypes observed in DGGE were responsible for para and meta dechlorination respectively. Phylotype Cp-1 has 98% similarity to uncultured bacterium N5-12. Phylotype Cm-1 has 99% similarity to uncultured dechlorinating bacterium m1 or SF1 belonging to the ο-17/DF-1 group of PCB-dechlorinating bacteria.     

Limitations of reverse polyethylene samplers (RePES) for evaluating toxicity of field contaminated sediments

Passive samplers are used to measure dissolved nonionic organic contaminants (NOCs) in environmental media. More recently, reverse polyethylene samplers (RePES) have been used with spiked sediments to recreate interstitial water exposure concentrations and observed toxicity. In the present study, RePES were used with field contaminated sediments. The RePES was not capable of recreating the pattern of toxicity with the amphipod and mysid observed with intact field sediments. Decreased survival in the RePES exposures as compared to the whole sediment exposures was most likely caused by an overexposure to NOCs due to a lack of surrogate black carbon in the RePES system. As an alternative, aqueous phase studies were performed in which polyethylene was allowed to equilibrate with slurries of intact sediments for 3 weeks. Three weeks was found to be an insufficient amount of time for the polyethylene to equilibrate with the sediment. An additional study demonstrated 3 months was sufficient for lower contaminant concentrations, but might not be an adequate amount of time for more highly contaminated sediments. The aqueous phase transfer approach may be useful if equilibration is sufficiently long, although this length of time may be impractical for use in certain applications, such as toxicity identification evaluations (TIEs).     

Winter and summer characteristics of airborne particles inside emperor Qin's Terra-Cotta Museum, China: a study by scanning electron microscopy-energy dispersive X-ray spectrometry

Day- and nighttime total suspended particulate matter was collected inside and outside Emperor Qin's Terra-Cotta Museum in winter and summer 2008. The purpose was to characterize the winter and summer differences of indoor airborne particles in two display halls with different architectural and ventilation conditions, namely the Exhibition Hall and Pit No. 1. The morphology and elemental composition of two season samples were investigated using scanning electron microscopy and energy dispersive X-ray spectrometry. It is found that the particle size, particle mass concentration, and particle type were associated with the visitor numbers in the Exhibition Hall and with the natural ventilation in Pit No. 1 in both winter and summer. Evident winter and summer changes in the composition and physicochemical properties of the indoor suspended particulate matters were related to the source emission and the meteorological conditions. Particle mass concentrations in both halls were higher in winter than in summer. In winter, the size of the most abundant particles at the three sites were all between 0.5 and 1.0 microm, whereas in summer the peaks were all located at less than 0.5 microm. The fraction of sulfur-containing particles was 2-7 times higher in winter than in summer. In addition to the potential soiling hazard, the formation and deposition of sulfur-containing particles in winter may lead to the chemical and physical weathering of the surfaces of the terra-cotta statues.     

Characterization of spatial impact of particles emitted from a cement material production facility on outdoor particle deposition in the surrounding community

The objective of this study was to estimate the contribution of a facility that processes steel production slag into raw material for cement production to local outdoor particle deposition in Camden, NJ. A dry deposition sampler that can house four 37-mm quartz fiber filters was developed and used for the collection of atmospheric particle deposits. Two rounds of particle collection (3-4 weeks each) were conducted in 8-11 locations 200-800 m downwind of the facility. Background samples were concurrently collected in a remote area located -2 km upwind from the facility. In addition, duplicate surface wipe samples were collected side-by-side from each of the 13 locations within the same sampling area during the first deposition sampling period. One composite source material sample was also collected from a pile stored in the facility. Both the bulk of the source material and the < 38 microm fraction subsample were analyzed to obtain the elemental source profile. The particle deposition flux in the study area was higher (24-83 mg/m2 x day) than at the background sites (13-17 mg/m2day). The concentration of Ca, a major element in the cement source production material, was found to exponentially decrease with increasing downwind distance from the facility (P < 0.05). The ratio of Ca/Al, an indicator of Ca enrichment due to anthropogenic sources in a given sample, showed a similar trend. These observations suggest a significant contribution of the facility to the local particle deposition. The contribution of the facility to outdoor deposited particle mass was further estimated by three independent models using the measurements obtained from this study. The estimated contributions to particle deposition in the study area were 1.8-7.4% from the regression analysis of the Ca concentration in particle deposition samples against the distance from the facility, 0-11% from the U.S. Environmental Protection Agency (EPA) Chemical Mass Balance (CMB) source-receptor model, and 7.6-13% from the EPA Industrial Source Complex Short Term (ISCST3) dispersion model using the particle-size-adjusted permit-based emissions estimates.     

Optimal evaluation of infectious medical waste disposal companies using the fuzzy analytic hierarchy process

Ever since Taiwan’s National Health Insurance implemented the diagnosis-related groups payment system in January 2010, hospital income has declined. Therefore, to meet their medical waste disposal needs, hospitals seek suppliers that provide high-quality services at a low cost. The enactment of the Waste Disposal Act in 1974 had facilitated some improvement in the management of waste disposal. However, since the implementation of the National Health Insurance program, the amount of medical waste from disposable medical products has been increasing. Further, of all the hazardous waste types, the amount of infectious medical waste has increased at the fastest rate. This is because of the increase in the number of items considered as infectious waste by the Environmental Protection Administration. The present study used two important findings from previous studies to determine the critical evaluation criteria for selecting infectious medical waste disposal firms. It employed the fuzzy analytic hierarchy process to set the objective weights of the evaluation criteria and select the optimal infectious medical waste disposal firm through calculation and sorting. The aim was to propose a method of evaluation with which medical and health care institutions could objectively and systematically choose appropriate infectious medical waste disposal firms.