Long-term study of 99Tc in the marine environment on the Swedish west coast

The activity concentration of (99)Tc in brown seaweed (Fucus vesiculosus and Fucus serratus) and seawater were analysed in samples collected in 1991, 1995 and 2001 at several stations along the Swedish west coast. In addition to these locations, a well-defined site (S?rdal, 56.76 degrees N, 12.63 degrees E) was included with (99)Tc activity concentration data in seaweed from 1967 to 2000. Over the years, the major source of (99)Tc in the coastal waters of western Sweden has been the radioactive liquid discharge from the nuclear fuel reprocessing plant in Sellafield (UK) transported via ocean currents in the North Sea. The (99)Tc activity concentration in seaweed at the S?rdal site increased from approximately 30 Bq kg(-1) up to 230 Bq kg(-1) (dry weight) between 1997 and 2000 due to the Sellafield EARP (Enhanced Actinide Removal Plant) discharges in 1995-1996, yielding an approximate transport time of 4-5 years between the Irish Sea and the Kattegat. Due to the very sharp gradient in (99)Tc concentration between the Baltic Sea and the North Sea, (99)Tc is presently one of the best transit tracers for the recent ventilation events in the Baltic Sea.     

Environmental regulation of trades by fixed standards: The Danish experience

Summary In 1986, the Danish Environmental Protection Agency established a new regulatory system aimed at small-scale polluting activities. Contrary to the dominant regulatory system based on individual standards for each polluting activity, the new regulatory system established uniform and fixed environmental standards for all activities within a trade. The fixed standards concern location, design and daily operation. Thus far, the new regulatory system has been implemented in the trades of fur farms and auto-repair shops.This study shows that fixed environmental standards reduce the total administrative costs, intensify local monitoring and enforcement of the standards, and improve the environmental state. It is proposed that the following criteria should be considered if the regulatory system is to be implemented in other trades. The trade should consist of many units and be characterised by a moderate pace of technological development, it should posses well-defined and well-known environmental problems, and have a cooperative trade association. In Denmark several trades have been identified as obvious objects for future regulation by fixed environmental standards.Bente Kjærgård is a Research Associate in the Department of Environment, Technology and Social Studies at Roskilde University. Correspondence should be addressed to this author. The other authors are Associate Professors in the same Department. Each author possesses a research degree as follows: Per Homann Jespersen in Chemical Engineering, Henning Schroll in Biology, Jesper Holm in Technological Planning, and Bente Kjærgård in Environmental Planning.     

Test of firefighter's turnout gear in hot and humid air exposure.

Five students of a rescue training school cycled at 50 W for 20 min at 20 degrees C before walking at 5 km/hr up to 30 min in a climatic chamber at 55 degrees C and 30% relative humidity. 4 different types of clothing ensembles differing in terms of thickness and thermal insulation value were tested on separate days. All subjects completed 28-30 min in light clothing, but quit after 20-27 min in 3 firefighter ensembles due to a rectal temperature of 39.0 degrees C or subjective fatigue. No difference in the evolution of mean skin or rectal temperature was seen for the 3 turnout ensembles. Sweat production amounted to about 1000 g in the turnout gears of which less than 20% evaporated. It was concluded that the small differences between the turnout gears in terms of design, thickness and insulation value had no effect on the resulting heat physiological strain for the given experimental conditions.     

A common approach for radiological protection of humans and the environment

Protection of the environment is developing rapidly at the national and international level, but there are still no internationally agreed recommendations as to how radiological protection of the environment should be carried out. The International Commission on Radiological Protection (ICRP) is currently reviewing its existing recommendations for human protection. It has set up a task group with the aim of developing a protection policy for, and suggesting a framework of, the protection of the environment that could feed into its recommendations at the start of the 21st century. The task group will propose a framework for the protection of the environment from harmful effects of radiation, harmonising with the principles for the protection of humans. Although the task group has not yet finalised on the objectives for the environment, these might be to safeguard the environment by preventing or reducing the frequency of effects likely to cause early mortality, reduced reproductive success, or the occurrence of scorable DNA damage in individual fauna and flora to a level where they would have a negligible impact on conservation of species, maintenance of biodiversity, or the health and status of natural habitats or communities. To achieve these objectives, a set of reference dose models, reference dose per unit intake and reference organisms will be required.     

Polonium-210 and lead-210 in the terrestrial environment: a historical review

The radionuclides ²¹⁰Po and ²¹⁰Pb widely present in the terrestrial environment are the final long-lived radionuclides in the decay of ²³⁸U in the earth’s crust. Their presence in the atmosphere is due to the decay of ²²²Rn diffusing from the ground. The range of activity concentrations in ground level air for ²¹⁰Po is 0.03-0.3 Bq m⁻³ and for ²¹⁰Pb 0.2-1.5 Bq m⁻³.In drinking water from private wells the activity concentration of ²¹⁰Po is in the order of 7-48 mBq l⁻¹ and for ²¹⁰Pb around 11-40 mBq l⁻¹. From water works, however, the activity concentration for both ²¹⁰Po and ²¹⁰Pb is only in the order of 3 mBq l⁻¹.Mosses, lichens and peat have a high efficiency in capturing ²¹⁰Po and ²¹⁰Pb from atmospheric fallout and exhibit an inventory of both ²¹⁰Po and ²¹⁰Pb in the order of 0.5-5 kBq m⁻² in mosses and in lichens around 0.6 kBq m⁻². The activity concentrations in lichens lies around 250 Bq kg⁻¹, dry mass.Reindeer and caribou graze lichen which results in an activity concentration of ²¹⁰Po and ²¹⁰Pb of about 1-15 Bq kg⁻¹ in meat from these animals. The food chain lichen-reindeer or caribou, and Man constitutes a unique model for studying the uptake and retention of ²¹⁰Po and ²¹⁰Pb in humans. The effective annual dose due to ²¹⁰Po and ²¹⁰Pb in people with high consumption of reindeer/caribou meat is estimated to be around 260 and 132 μSv a⁻¹ respectively.In soils, ²¹⁰Po is adsorbed to clay and organic colloids and the activity concentration varies with soil type and also correlates with the amount of atmospheric precipitation. The average activity concentration levels of ²¹⁰Po in various soils are in the range of 20-240 Bq kg⁻¹.Plants become contaminated with radioactive nuclides both by absorption from the soil (supported Po) and by deposition of radioactive fallout on the plants directly (unsupported Po). In fresh leafy plants the level of ²¹⁰Po is particularly high as the result of the direct deposition of ²²²Rn daughters from atmospheric deposition. Tobacco is a terrestrial product with high activity concentrations of ²¹⁰Po and ²¹⁰Pb. The overall average activity concentration of ²¹⁰Po is 13 ± 2 Bq kg⁻¹. It is rather constant over time and by geographical origin.The average median daily dietary intakes of ²¹⁰Po and ²¹⁰Pb for the adult world population was estimated to 160 mBq day⁻¹ and 110 mBq day⁻¹, corresponding to annual effective doses of 70 μSv a⁻¹ and 28 μSv a⁻¹, respectively. The dietary intakes of ²¹⁰Po and ²¹⁰Pb from vegetarian food was estimated to only 70 mBq day⁻¹ and 40 mBq day⁻¹ corresponding to annual effective doses of 30.6 μSv a⁻¹ and 10 μSv a⁻¹, respectively. Since the activity concentration of ²¹⁰Po and ²¹⁰Pb in seafood is significantly higher than in vegetarian food the effective dose to populations consuming a lot of seafood might be 5-15 fold higher.     

The potential of willow for remediation of heavy metal polluted calcareous urban soils

Growth performance and heavy metal uptake by willow (Salix viminalis) from strongly and moderately polluted calcareous soils were investigated in field and growth chamber trials to assess the suitability of willow for phytoremediation. Field uptakes were 2-10 times higher than growth chamber uptakes. Despite high concentrations of cadmium (≥80 mg/kg) and zinc (≥3000 mg/kg) in leaves of willow grown on strongly polluted soil with up to 18 mg Cd/kg, 1400 mg Cu/kg, 500 mg Pb/kg and 3300 mg Zn/kg, it is unsuited on strongly polluted soils because of poor growth. However, willow proved promising on moderately polluted soils (2.5 mg Cd/kg and 400 mg Zn/kg), where it extracted 0.13% of total Cd and 0.29% of the total Zn per year probably representing the most mobile fraction. Cu and Pb are strongly fixed in calcareous soils.     

Adsorption of mono- and di-butyltin by a wheat charcoal: pH effects and modeling

Understanding adsorption processes of butyltins (BTs) such as monobutyltin (MBT) and dibutyltin (DBT) by black carbons is important for the evaluation of BT exposure risks to organisms and humans. However, relevant knowledge is scarce. In this study, the acidity constants pK_a,1 = 2.3, pK_a,2 = 3.5 and pK_a,3 = 5.9 for MBT and pK_a,1 = 3.0 and pK_a,2 = 5.1 for DBT are estimated via potentiometric titration. Additionally, adsorption isotherms of BTs to a wheat charcoal were determined. The adsorption behavior was observed to be pH-dependent due to BT speciation and the pH-dependent surface charge of the charcoal. MBT adsorption to the charcoal decreases with increasing pH from 4 to 8, while the highest adsorption occurs at pH 6 for DBT. Adsorption of the BTs is successfully described in the pH range of 3-10 by using a newly developed pH-dependent Dual Langmuir model. The model has the potential to predict the interaction of BT species with charcoal, which can contribute to the risk assessments of BTs in the environment.     

Time-Series Analysis of Above-Road Particulate Matter at the Caldecott Tunnel Exit

ABSTRACT

On November 18, 1997, above-road particulate matter (PM) lidar (light detection and ranging) signals and heavy-duty (HD) and light-duty (LD) vehicle counts were simultaneously collected for 894 10-sec sampling periods at the Caldecott Tunnel in Orinda, CA, for the purpose of measuring the relative contributions of LD and HD vehicles to the PM lidar signal under real-world driving conditions. The relationship between the PM lidar signal and traffic activity (i.e., LD and HD traffic volumes) was examined using a time-series analysis technique, multilagged regression. The time-series model results indicate that the PM lidar signal in the current sampling period (PM_t) depended on the level recorded in the previous three sampling periods (i.e., PM_t-1, PM_t-2, and PM_t-3), the number of LD vehicles in the seventh past sampling period (LD_t-7), and the number of HD vehicles measured 80 sec previous to the current sampling period (HD_t-8). On a 10-sec period basis, the model results indicate that HD vehicles contributed, on average, 3 times more to above-road PM li-dar signals than did LD vehicles. The observed lag in the relationship between vehicle types and the lidar signal 20 m above the road suggests that resuspended road dust, rather than tailpipe exhaust emissions, was the main source of the detected PM. Detection of road dust at such heights above the road suggests the need for investigating the processes governing the vertical transport and recycling of PM over the road as a function of vehicle dynamics under a range of meteorological conditions.     

The pH-dependent adsorption of tributyltin to charcoals and soot

Widespread use of tributyltin (TBT) poses a serious environmental problem. Adsorption by black carbon (BC) may strongly affect its behavior. The adsorption of TBT to well characterized soot and two charcoals with specific surface area in the range of 62-111 m² g⁻¹ have been investigated with main focus on pH effects. The charcoals but not soot possess acidic functional groups. TBT adsorption reaches maximum at pH 6-7 for charcoals, and at pH > 6 for soot. Soot has between 1.5 and 15 times higher adsorption density (0.09-1.77 μmol m⁻²) than charcoals, but charcoals show up to 17 times higher sorption affinities than soot. TBT adsorption is successfully described by a new pH-dependent dual Langmuir model considering electrostatic and hydrophobic adsorption, and pH effects on TBT speciation and BC surface charge. It is inferred that strong sorption of the TBTOH species to BC may affect TBT toxicity.     

Near-field dust exposure from cotton field tilling and harvesting

The frequency and intensities of dust exposures in and near farm fields, which potentially contribute to high intensity human exposure events, are undocumented due to the transient nature of local dust plumes and the difficulties of making accurate concentration measurements. The objective of this study is to measure near-field spatial concentrations of the dust plumes emitted during tilling and harvesting of an irrigated cotton field outside of Las Cruces, NM (soil class: fine-loamy, mixed, superactive, thermic Typic Calciargid). A comparison of remote lidar measurements of plumes emitted from cotton field operations with in situ samplers shows a strong agreement between the two techniques: r2 = 0.79 for total suspended particulates (TSP) and r2 = 0.61 for particulate matter with diameter less than or equal to 10 microm (PM10). Plume movement was dependent on the short-term wind field and atmospheric stability. Horizontal spread rate of the plumes, determined from lidar measured Gaussian dispersion parameters, was less than expected by a factor of 7. Thus, in-plume downwind concentrations were higher than expected. Vertical dispersion was dependent on the rise of "cells" of warm air convecting off the soil surface. On a windy day, discing the field showed TSP and PM10 concentrations at the source itself of up to 176 microg m(-3) and 120 microg m(-3), respectively. These resulted in in-plume peak TSP concentrations of about 1.22 microg m(-3) at 10 m downwind and 0.33 microg m(-3) at 100 m downwind. The measured concentrations highlight a potential exposure risk to people in and around farming operations.