Elimination of Cs+ from aquatic systems by an adsorbent prepared by immobilization of potassium copper hexacyanoferrate on the SBA-15 surface: kinetic,thermodynamic, and isotherm studies

Environmental Science and Pollution Research - For elimination of cesium from aqueous solutions, mesoporous SBA-15 was synthesized and employed as the support for immobilization of potassium copper...     

Generalized gene expression programming models for estimating reference evapotranspiration through cross-station assessment and exogenous data supply

Environmental Science and Pollution Research - Adopting methodologies utilizing exogenous data from ancillary stations for determining crop water requirement is a suitable approach to exempt local...     

Investigation of the association between pesticide exposure and the prevalence of type 2 diabetes in Shahedieh population in Yazd

Environmental Science and Pollution Research - This study aimed to investigate the effect of exposure to pesticides and the prevalence of type 2 diabetes (T2D). In a cross-sectional study with a...     

Application of electrochemical reactor divided by cellulosic membrane for optimized simultaneous removal of phenols,chromium, and ammonia from tannery effluents

The post treatment of simulated tannery wastewater was evaluated in an electrochemical oxidation process under galvanostatic conditions. A continuous flow reactor divided by a cellulosic membrane consisted of Ti/SnO₂–Sb anodes and iron cathodes was used. Central composite design and response surface methodology (RSM) were applied to investigate the effects of six operational parameters, namely initial concentration of total phenols (TPh), total chromium (TCr), total ammonia nitrogen (TAN), flow rate (Q), current intensity (I), and electrode surface area (A). Effectiveness of the innovative cellulosic membrane was proven by considerable pH variations in the anolyte and catholyte chambers. A faster removal rate was observed for TPh and TAN, followed by TCr. The treatment level was very sensitive to Q and I in the studied ranges. RSM showed the removal efficiencies of 78.14%, 63.42%, and 86.09% for TPh, TCr, and TAN, respectively, are achieved under optimal conditions with consumption of only 9.03 kWh m^?3 electrical energy. Chlorinated compounds such as chloroform, 2,4-dichlorophenol, and chlorobenzene were detected as the degradation intermediates. According to the obtained results, electrolysis in the divided cell with cellulosic membrane is a practical, cost-effective method for advanced treatment of tannery effluents.     

Interaction of selenium and cadmium in wheat at different salinities

Abstract

Interaction of Se up to 8?mg?kg^?1 soil and Cd at 5 and 15?mg?kg^?1 soil in wheat at different salinities was evaluated. Se concentrations in wheat shoots were progressively increased in parallel to Se in soil but decreased by addition of Cd. With increasing salinity, Cd concentrations increased and Se decreased. At low salinity, low addition of Se to the soil reduced Cd accumulation. At moderate and high salinities, only high Se amendment led to decline in Cd uptake, at the expense of reduction in biomass yield. Se at 0.5?mg?kg^?1 soil alleviated the negative effect of Cd on shoot yield.     

Hydrogeochemistry study and groundwater quality assessment in the north of Isfahan,Iran

This study presents the groundwater quality assessment in the north of Isfahan, Iran. In the study area, assessment and measurement of groundwater hydrochemical parameters such as pH, total dissolved solids (TDS), electrical conductivity (EC), sodium absorption ratio (SAR), total hardness, major cations (K⁺, Na⁺, Ca²⁺ and Mg²⁺) and major anions (Cl^?, \({\text{HCO}}_{ 3}^{ - } ,{\text{CO}}_{3}^{2 - }\) and \({\text{SO}}_{4}^{2 - }\)) concentrations were performed. Accordingly, the 66 water samples from different locations were collected during April and May 2015. Water samples collected in the field were analyzed in the laboratory for cations and anions using the standard methods. In this research, the analytical results of physiochemical parameters of groundwater were compared with the standard guideline values as recommended by the world health organization (WHO) for drinking and public health purposes. The pH values of groundwater samples varied from 7.05 to 8.95 with a mean of 7.78, indicating a neutral to slightly alkaline water. TDS values showed that 14% of the samples exceeds the desirable limit given by WHO. EC values varied from 213 to 4320 µS/cm, while 23% of the samples were more than the standard limit. Gibbs diagram had shown that 90% of the samples in the study area fall in the rock weathering zone, and this means that chemical weathering of rock-forming minerals is the main factor controlling the water chemistry in the study area. Irrigation suitability and risk assessment of groundwater are evaluated by measuring EC, %Na, SAR and RSC. According to the dominant cations and anions, five types of water were identified in the water samples: Ca-HCO₃, Ca-SO₄, Na-Cl, Na-HCO₃ and Na-SO₄. The results show that the majority of samples (30 samples, 45%) belongs to the mixed Na-SO₄ water type. Correlation analysis and principal component analysis was used to identify the relationship between ions and physicochemical parameters. Results indicated that 18 stations of the study area had the best quality and can be used for irrigation and drinking purposes in the future.     

A review of combinations of electrokinetic applications

Anthropogenic activities contaminate many lands and underground waters with dangerous materials. Although polluted soils occupy small parts of the land, the risk they pose to plants, animals, humans, and groundwater is too high. Remediation technologies have been used for many years in order to mitigate pollution or remove pollutants from soils. However, there are some deficiencies in the remediation in complex site conditions such as low permeability and complex composition of some clays or heterogeneous subsurface conditions. Electrokinetic is an effective method in which electrodes are embedded in polluted soil, usually vertically but in some cases horizontally, and a low direct current voltage gradient is applied between the electrodes. The electric gradient initiates movement of contaminants by electromigration (charged chemical movement), electro-osmosis (movement of fluid), electrolysis (chemical reactions due to the electric field), and diffusion. However, sites that are contaminated with heavy metals or mixed contaminants (e.g. a combination of organic compounds with heavy metals and/or radionuclides) are difficult to remediate. There is no technology that can achieve the best results, but combining electrokinetic with other remediation methods, such as bioremediation and geosynthetics, promises to be the most effective method so far. This review focuses on the factors that affect electrokinetic remediation and the state-of-the-art methods that can be combined with electrokinetic.     

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010

Environmental Geochemistry and Health - There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in...     

High potential for the formation of haloacetic acids in the Karoon River water in Iran

The impact of the total organic carbon (TOC), chlorine dosage, water temperature, reaction time, pH, and seasonal variation on the formation of haloacetic acids (HAAs) in the Karoon River in Iran was studied. The results showed that dichloroacetic acid and trichloroacetic acid were the most detected HAA₅. The HAA₅ formation potential (HAA₅FP) levels in the Karoon River water in spring time, when the water TOC content exceeded 4 mg/L, were 1.38 times higher than during the winter season, when the water TOC content was below 3.5 mg/L. There was not a strong correlation between the HAA₅FP and the residence time for the Karoon River water. For the range of the water temperatures studied, there was little variation in the HAA₅FP in cold water, but in warmer water, the values of the HAA₅FP varied quickly.     

Determination of polychlorinated biphenyls and total mercury in two fish species (<Emphasis Type="Italic">Esox lucius</Emphasis> and <Emphasis Type="Italic">Carassius auratus</Emphasis>) in Anzali Wetland,Iran

The Anzali Wetland is one of the most important ecosystems in the north of Iran, and parts of it were registered as a Ramsar site in 1975. However, even though, due to many problems, including eutrophication produced by inflow of excess nutrients and organic materials, the wetland was also listed on the Montreux Record indicating the need to take urgent remedial action. This study was conducted to study the levels of polychlorinated biphenyls (PCBs) and total mercury (THg) in two fish species (Esox lucius and Carassius auratus) as bio-indicators of the ecosystem condition in eastern part of Anzali Wetland. The sampling was carried out in six different periods between years 2009 and 2010. The results showed that the amounts of PCBs in the muscle of northern pike were below the detection limit of gas chromatography, whereas the average concentration in goldfish was 0.449 mg/kg wet weight. Some possible reasons for the higher levels of PCBs in goldfish in comparison with pike have been discussed. No significant (p < 0.05) correlation was observed between PCBs and biological factors (weight, length, lipid content) for both species. On the other hand, the mean concentration of THg in the muscle of pike and goldfish were 182.22 and 75.27 ng/g dry weight, respectively. Although these concentrations were below US-EPA criterion for human consumption (0.3 mg/kg), it pointed up a significant deterioration of the ecosystem condition during the past years. Finally, statistical analysis revealed a significant correlation between THg with weight and an insignificant correlation with length for pike specimens.